SDX55M 002 Baseband IC – Qualcomm Snapdragon X55 5G Modem

₨ 800

H2: SDX55M 002 Baseband IC for 5G Modem Board Repair
The SDX55M 002 is the Qualcomm baseband processor from the Snapdragon X55 5G modem-RF system. It handles 2G through 5G NR multimode connectivity on the logic board, including sub-6 GHz and mmWave bands. You use it when a board shows no network, a lost signal after a fall, or a dead modem after a liquid-damage clean-up. Replacing the chip takes BGA rework skill, a stable hot air station, and a microscope. This IC suits technicians who handle iPhone 12 series boards and other X55-based handsets. Verify the board marking before you order.

14 People watching this product now!
Description

H2: SDX55M 002 Baseband IC: Qualcomm Snapdragon X55 Modem Chip
The SDX55M 002 baseband IC is the cellular modem chip inside the Qualcomm Snapdragon X55 5G modem-RF system. Qualcomm built it as a multimode 5G solution, and phone makers placed it on the logic board next to the application processor, the RF transceiver, and a separate power management chip. Teardown records place the SDX55M-002 in the Sony Xperia 5 II, and a die analysis report traces the SDX55M package to a Xiaomi Mi 10 5G board. Sellers also list it for the iPhone 12 family. This listing covers the baseband chip itself, not a power IC. The matching power management IC for the platform is the PMX55.

H3: What the SDX55M 002 does on the board
Qualcomm describes the X55 as a 5G modem with integrated multimode support from 5G down to 2G. It covers 5G mmWave and sub-6 GHz, standalone and non-standalone modes, TDD and FDD, and 5G/4G spectrum sharing. Peak 5G speed reaches 7.5 Gbps download and 3 Gbps upload, and the LTE side reaches 2.5 Gbps download. Qualcomm also lists 5G dual SIM support. A die analysis report shows the SDX55M silicon on TSMC’s N7 FinFET process. Qualcomm pairs the modem with its QTM525 mmWave antenna module and a separate RF transceiver and front-end modules, and the Sony Xperia 5 II teardown lists the SDR865 transceiver beside the SDX55M-002 baseband. The chip does not generate its own power rails. The PMX55 PMIC serves the SDX55 platform with SMPS and LDO regulators, so a modem fault can start at the power chip instead of the baseband. Check the rails first, then blame the IC.

H3: Where it fits in your repair workflow
Start with the fault description. A dead phone usually points to the battery, the charging path, or the main power section, so rule those out before you touch the modem area. Baseband faults show up as no service, no network search, or a handset that loses signal after a drop or liquid exposure. On water-damaged boards, clean with isopropyl alcohol and a brush before you measure, because residue near the modem area gives false readings. Measure the supply rails from the PMX55, inspect the area under your microscope for corrosion and lifted pads, and reflow or reball only after the rails read correct. If the fault stays, the SDX55M 002 becomes the suspect. Set your hot air station to a controlled profile, remove the old IC, clean the pads, and place the new chip with a matching stencil. Test network registration and signal before you close the phone. This workflow needs hot air stations, microscopes, reballing kits, PCB holders, and multimeters from the same repair bench.

H3: Buying notes for technicians in Pakistan
Match the marking on the original chip, SDX55M 002, against the part you order. Confirm the board and model first, because Qualcomm ships several modem generations and a wrong variant wastes a rework attempt. Store the chip in an anti-static bag and keep it dry until you start the job, since BGA packages absorb humidity and can pop during reflow. Keep your reflow profile low enough to protect the neighbouring RF and power chips. If your current hot air station struggles with BGA work, upgrading to a station with precise airflow control improves your first-pass success rate. Mechanicpk lists the SDX55M 002 for technicians who need exact IC markings instead of generic modem chips, and for shops that handle iPhone 12 series, Xiaomi Mi 10 5G, and Sony Xperia 5 II boards.

Additional information
Weight0.1 kg
Q & A
Please login to post questions

Key Features

  • Qualcomm Snapdragon X55 5G modem-RF baseband processor marked SDX55M 002
  • 5G NR support across sub-6 GHz and mmWave bands
  • Standalone and non-standalone 5G modes with TDD and FDD operation
  • 5G/4G spectrum sharing with LTE, 3G, and 2G fallback
  • Peak 5G speeds of 7.5 Gbps download and 3 Gbps upload per Qualcomm
  • 5G dual SIM support listed by Qualcomm
  • Documented in teardowns of the Sony Xperia 5 II and Xiaomi Mi 10 5G
  • Works with the PMX55 power management IC on the SDX55 platform

Specifications

BrandQualcomm
ModelSDX55M-002 (chip marking SDX55M 002)
CategoryBaseband processor IC (5G modem)
CompatibilitySnapdragon X55 (SDX55M) based handsets
Supported DevicesApple iPhone 12 series, Sony Xperia 5 II, Xiaomi Mi 10 5G
TechnologySnapdragon X55 5G modem-RF, 5G NR sub-6 GHz and mmWave, LTE Cat 22, N7 FinFET process, up to 7.5 Gbps download and 3 Gbps upload

Common Repair Uses

  • Verified scope: baseband and modem-section repair on X55-based logic boards.
  • No service or no network search on 5G handsets
  • Signal loss after a drop that cracks BGA joints
  • Baseband replacement after liquid damage and corrosion at the modem area
  • Reball and reflow of a lifted SDX55M package
  • Weak reception diagnosis alongside RF transceiver checks
  • Modem-section rail testing together with the PMX55 power management IC
  • Donor-board chip swap on iPhone 12 series logic boards
  • BGA modem rework practice for training benches

Compatible Devices

  • Verified scope: handsets built on the Qualcomm Snapdragon X55 (SDX55M) modem platform. iPhone 12 compatibility comes from seller listings, so match the chip marking on your board.
  • Apple iPhone 12
  • Apple iPhone 12 mini
  • Apple iPhone 12 Pro
  • Apple iPhone 12 Pro Max
  • Sony Xperia 5 II (A002SO)
  • Xiaomi Mi 10 5G (M2001J2C)

FAQ

What is the product name?
The product name is SDX55M 002 Baseband IC.
What is the brand of this product?
The brand of this product is Qualcomm.
What is the model of this product?
The model of this product is SDX55M-002.
What is this product used for?
This product is used for baseband and 5G modem replacement on Snapdragon X55 based phone boards.
Which devices are compatible with this product?
This product is compatible with Snapdragon X55 (SDX55M) based handsets, including the iPhone 12 series, Sony Xperia 5 II, and Xiaomi Mi 10 5G.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Is the SDX55M 002 a power IC or a baseband IC?
The SDX55M 002 is a baseband (modem) processor. The PMX55 is the power management IC on the same platform.
How do I check the board before replacing the SDX55M 002?
Measure the PMX55 supply rails, clean any liquid residue, and inspect the modem area for lifted pads. Replace the baseband chip only after the rails read correct and the network fault stays.