YCS PPD Solder Paste 199° – BGA & CPU Reballing
₨ 1,200
YCS 199 Solder Paste for Reballing
YCS PPD Solder Paste 199° gives your bench a high-temperature option with a 199°C melting point, supplied in a 50g jar. Technicians use this YCS 199 solder paste for BGA reballing, CPU tin planting, and IC rework on mobile phone motherboards, where a higher-melting joint suits the job. Choose it when your workflow calls for a step above the 138°C, 150°C, and 183°C pastes in the same YCS range. Mechanicpk supplies it to repair shops, service centers, and technicians across Pakistan who reball and rework boards every day. Pair it with a reballing stencil, a hot air station, and flux cleaner for a complete setup.
In stock
YCS PPD Solder Paste 199°: High-Temperature Paste for Board-Level Work
YCS PPD Solder Paste 199° comes in a 50g jar and melts at 199°C, which places it in the high-temperature class for BGA, IC, CPU, and PCB soldering on mobile phone motherboards. Technicians who search for YCS 199 solder paste want a higher-melting option for reballing and rework jobs. Mechanicpk supplies it to repair shops, service centers, and training institutes across Pakistan that run board-level repair every week.
What a 199°C Melting Point Changes on Your Bench
Melting point decides how you plan a job. A 199°C paste needs more heat than the low-temperature pastes in the YCS range, so you set your hot air station and preheater with that target in mind and shield the components around the chip. Step soldering is standard practice in board repair: you work with the higher-melting paste first and finish with lower-melting ones, so earlier joints stay put during later passes. Dead phone repairs often make you touch the same area twice, once for a CPU and once for a PMIC or charging IC beside it. Choosing the paste temperature before you start keeps those passes in a sensible order. A microscope and a stable PCB holder let you watch the paste flow and the solder balls form, so you judge the joint by sight and skip the guesswork.
Where YCS 199 Solder Paste Fits in Your Reballing Workflow
You apply the paste through a reballing stencil onto cleaned pads, melt it with a hot air station, and form uniform solder balls ready for placement. The same paste tins the pads on CPUs, eMMC and UFS chips, PMICs, and charging ICs before you refit them, since all of these ship as BGA or SMD packages. When a phone arrives with a boot loop issue, a hang on logo, a charging issue, or a dead after flash fault, board-level diagnosis with a multimeter can point to a lifted ball or a cracked joint under one chip. Reballing with fresh paste addresses that fault at the joint itself. After the rework, you confirm the repair with your test box, eMMC programmer, UFS adapter, or ISP pinout tool, so the paste sits in the middle of a diagnose, rework, and verify cycle.
Handling the 50g Jar and Choosing Your YCS Temperature
The 50g jar suits shops that reball several boards a week. Keep the lid sealed after every use and stir the paste before you load a stencil, so the flux and the metal stay evenly mixed. YCS also sells pastes at 138°C, 150°C, 183°C, and 215°C, which lets you build a temperature ladder on your bench instead of forcing one paste to cover every job. Keep the 199°C jar beside a lower-temperature paste for the finishing passes, and read the temperature on each jar before you reach for it. Round out the setup with a soldering station for pad cleanup, a reballing kit for stencils and balls, and flux remover for post-job cleaning, so your result looks clean under the microscope.
| Weight | 0.50 kg |
|---|
Key Features
- ✓199°C melting point in the high-temperature class
- ✓50g jar for steady daily use
- ✓Made for BGA, IC, CPU, and PCB soldering
- ✓Suits mobile phone motherboard reballing
- ✓Fits stencil-based tin planting
- ✓Sits above the 138°C, 150°C, and 183°C YCS pastes for step soldering
- ✓Pairs with hot air stations and soldering stations
- ✓Compact jar that fits a repair bench drawer
Specifications
| Brand | YCS |
|---|---|
| Model | YCS 199 |
| Category | Solder Paste |
| Compatibility | Universal – BGA, IC, CPU, SMD, and PCB soldering; not device-specific |
| Supported Devices | Mobile phone motherboards (not brand-specific) |
| Technology | High-temperature solder paste, 199°C melting point |
| Weight | 50g |
Common Repair Uses
- ✓Reballing, tin planting, and IC rework on mobile phone motherboards
- ✓BGA reballing through a stencil
- ✓CPU tin planting and reflow
- ✓Re-soldering eMMC and UFS chips after removal
- ✓PMIC replacement and pad tinning
- ✓Charging IC replacement for charging issue faults
- ✓Rework on dead phone boards with lifted or cracked joints
- ✓Pad tinning before refitting a cleaned IC
- ✓Step soldering next to lower-temperature joints
Compatible Devices
- ✓Universal scope – works on BGA, IC, CPU, and PCB soldering for mobile phone motherboards; not tied to specific phone models
- ✓CPU and SoC BGA packages on mobile motherboards
- ✓eMMC and UFS BGA chips
- ✓PMIC (power management IC) packages
- ✓Charging IC packages
- ✓Audio and network ICs in BGA or SMD form
- ✓SMD components on mobile PCBs
- ✓Pad tinning for chips fitted through reballing stencils
- ✓General PCB soldering and rework pads
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
What melting point does YCS PPD Solder Paste 199° have, and how does it compare with other YCS pastes?
Can I use YCS 199 solder paste for reballing CPU, eMMC, and UFS BGA chips on dead phone boards?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock
UFI eMMC BGA Soldering Adapter (8 Footprints) for UFI-Box
In stock



