YCS GHKJ Tempered Glass Universal Fixture

₨ 3,600

Heat-Resistant Glass PCB Fixture

The YCS GHKJ Tempered Glass Universal Fixture holds mobile phone, tablet and watch motherboards steady during chip-level repair. A tempered insulated glass panel resists corrosion and wipes clean after flux and rosin work, while heat-resistant synthetic stone clamps with inward-angled bevels grip the board edges. The manufacturer listing rates the fixture above 500°C. Bidirectional screw adjustment, a no-drop screw design and a concealed threaded rod keep the clamps moving smoothly. Use it for soldering, chip de-gumming, planting tin and CPU or IC rework on your repair bench.

In stock

10 People watching this product now!
Description

Why the YCS GHKJ Tempered Glass Fixture Suits Chip-Level Repair

The YCS GHKJ tempered glass fixture gives your board a flat, rigid, heat-tolerant platform when a repair runs long under hot air or a soldering iron. YCS builds this circular fixture around a tempered insulated glass panel and heat-resistant synthetic stone clamps, so the board stays put while you work on the chip beside it. The manufacturer listing rates the fixture above 500°C, which covers the heat you put into a board during IC removal, tinning and de-gumming. When a dead phone lands on your bench with a glued-down CPU or a hang on logo fault that traces back to a weak solder joint, a stable holder saves you from chasing a sliding board across the table.

Glass Panel and Clamp Construction

The glass panel carries the board, and the panel resists corrosion, so flux residue and rosin wipe off with a cloth and alcohol instead of baking into the surface. The listing describes the fixture as anti-static, which suits a bench where you probe and power boards close to the clamps. The synthetic stone clamps use inward-angled bevels that press the board edges in and down, so the board sits flat against the glass while the heat builds. Bidirectional screw adjustment moves the clamps smoothly, and the no-drop screw design keeps a clamp from falling out mid-adjustment. A concealed threaded connecting rod keeps solder oil and rosin off the threads, which protects the adjustment from seizing after months of daily use. The fixture arrives as one compact, portable unit, so you can move it between your hot air station and your microscope without rebuilding the setup. Clean glass also lets you see the underside of the board, which helps when you check for leftover glue or solder balls after a rework pass.

Where the Fixture Fits in Your Repair Workflow

Chip-level work starts with a board that does not move. Mount a phone, tablet or watch mainboard in the fixture before you touch it with hot air, and both hands stay free for tweezers, flux and iron. The same setup covers de-gumming, where you soften the glue around a CPU or NAND and pick it away, and planting tin, where you tin pads and place ICs. Build the rest of the bench around it. A hot air station and a soldering station handle removal and rework, a microscope checks the pads, a reballing kit covers BGA work, and a multimeter confirms continuity once the chip sits down. On a dead after flash board, ISP pinout tools, eMMC programmers, UFS adapters and test boxes handle the software side while this fixture holds the board for the hardware fault repair. Model-specific PCB holders suit one board family; this universal unit covers the general case across your daily jobs, from a charging issue to a boot loop issue. Technicians who switch between boards all day gain the most, because one holder replaces the tape, putty and spare hands that slow a repair down.

Compatibility Scope and Buying Notes

The listing names mobile phones, tablets and watches as the board types the fixture holds, plus CPUs, chips, hard disk ICs and other precision components. YCS-GHKJ is a universal holder, not a model-specific jig, so it does not tie to a phone brand or chipset family. Check your largest board against the fixture’s clamping space before you order several units for a service center or a training lab. Repair shops that run more than one bench usually keep one fixture at each workstation, so a technician never waits for a shared holder during a busy afternoon. For a distributor-grade holder that keeps boards steady through repeated soldering, de-gumming and cleaning cycles, the YCS GHKJ tempered glass universal fixture earns its place on a professional repair bench.

Additional information
Weight0.115 kg
Q & A
Please login to post questions

Key Features

  • Tempered insulated glass panel resists corrosion and cleans easily
  • Heat-resistant synthetic stone clamps
  • Heat resistance above 500°C per the manufacturer listing
  • Inward-angled bevels on the clamps for secure edge grip
  • Smooth bidirectional screw adjustment
  • No-drop screw design
  • Concealed threaded connecting rod that resists solder oil and rosin build-up
  • Anti-static, compact and portable circular design

Specifications

BrandYCS
ModelYCS-GHKJ
CategoryPCB Holder / Soldering Fixture
CompatibilityMobile phone, tablet and watch motherboards, PCB mainboards, CPUs, chips, hard disk ICs
Supported DevicesMobile phones, tablets, watches (universal, not model-specific)
TechnologyBidirectional screw clamping on a circular tempered glass base, heat resistance above 500°C (per manufacturer listing)
MaterialTempered insulated glass panel, heat-resistant synthetic stone clamps

Common Repair Uses

  • Board holding during soldering, de-gumming and IC rework
  • Soldering on mobile motherboards
  • Chip de-gumming around CPU and NAND
  • Planting tin on IC pads
  • Securing the board during hot air IC removal
  • CPU and chip rework
  • Holding the board for flux and solder paste application
  • Board cleaning after flux and rosin work
  • Holding the board steady for pad inspection under a microscope

Compatible Devices

  • Universal board holder for mobile phone, tablet and watch mainboards, plus CPUs, chips and hard disk ICs; not tied to specific phone models
  • Mobile phone motherboards
  • Tablet motherboards
  • Watch mainboards
  • General PCB mainboards
  • CPU chips on mainboards
  • Hard disk IC boards
  • Other precision ICs and chips
  • Universal use, not model-specific

FAQ

What is the product name?
The product name is YCS GHKJ Tempered Glass Universal Fixture.
What is the brand of this product?
The brand of this product is YCS.
What is the model of this product?
The model of this product is YCS-GHKJ.
What is this product used for?
This product holds motherboards and PCBs steady during soldering, chip de-gumming, planting tin and IC rework.
Which devices are compatible with this product?
This product holds mobile phone, tablet and watch motherboards, PCB mainboards, CPUs, chips and hard disk ICs.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Can the YCS GHKJ glass fixture handle hot air rework temperatures?
The manufacturer listing states the fixture resists temperatures above 500°C without deformation, so it suits hot air and soldering work on the board.
Does the YCS GHKJ fixture hold tablet and watch boards as well as phone motherboards?
Yes. The listing names mobile phones, tablets and watches. It is a universal holder, so check your board against the fixture’s clamping space before you buy.