i2C 19-in-1 Face ID Dot Matrix Fixture for iPhone X-14 Pro Max
₨ 9,000
i2C 19-in-1 Face ID Dot Matrix Fixture for iPhone X to 14 Pro Max
The i2C 19-in-1 Face ID dot matrix fixture is a transparent acrylic alignment base for dot projector flex work across 19 iPhone models, from iPhone X through iPhone 14 Pro Max. A strong magnetic hold keeps the base stable on your bench, and a 360-degree rotary buckle lets you turn the assembly to the angle your workflow needs. The clear base makes flex placement easier to check before you run Face ID setup. It fits directly into a dot projector repair workflow, where accurate placement decides whether the phone passes setup or returns the lower/higher warning.
In stock
Face ID Dot Matrix Fixture for iPhone X to 14 Pro Max Repair
The i2C 19-in-1 Face ID dot matrix fixture gives your repair bench a dedicated base for aligning dot projector flex assemblies across 19 iPhone models, from iPhone X through iPhone 14 Pro Max. When a dot projector fails, Face ID setup often returns “Move iPhone a little lower/higher,” and the replacement flex must sit precisely in position before the phone can pass setup. This fixture holds the flex in a fixed reference position, so you spend less time aligning by feel and more time testing the repair.
Acrylic Base and Visual Alignment
The base is made from high-hardness transparent acrylic. You see the flex and the work surface clearly from above, which matters when you check placement before you commit the assembly. A transparent base also helps you confirm that the flex lies flat along its edges without a visible gap. Clear visibility reduces repeat alignment passes, and that saves time when you work on several units in one session. Keep the acrylic clean and free of flux residue, because residue can blur the details you rely on during placement. Wipe the surface with a lint-free cloth and isopropyl alcohol before each job, and inspect it under a microscope if the base shows scratches that could affect your view.
Magnetic Hold and 360-Degree Rotary Buckle
Strong magnetic adsorption keeps the base steady while you position the flex. A stable base prevents the small shifts that throw off alignment during the final press, so set the magnet position before you place the assembly. The 360-degree rotary buckle lets you turn the fixture to the angle that suits your hand position, whether you work from the left or right side of the board. The listing also describes an air avoidance design, which is meant to limit air trapped under the flex. When you remove the fixture, keep metal tools and filings away from the magnet, because loose metal can stick to the base and mark the acrylic surface.
Model Coverage and Workflow Fit
The fixture covers iPhone X, XS, XS Max, XR, the 11 series, the 12 series, the 13 series, and the 14 series, including iPhone 14 Plus and 14 Pro Max. It sits in the middle of the dot projector workflow. You remove the faulty flex, align the replacement on this base, and then test Face ID setup. The 15-in-1 version of this calibrator is listed as discontinued, so the 19-in-1 model is the current option for this range. The listing does not include iPhone 15 or newer models, so confirm your target model before you buy or start a job. Dot matrix data work on the flex is handled by a separate dot matrix programmer, and removal of the old flex typically requires a hot air station and a microscope at the bench.
| Weight | 0.29 kg |
|---|
Key Features
- ✓Covers 19 iPhone models from iPhone X to iPhone 14 Pro Max
- ✓Transparent high-hardness acrylic base for visual flex alignment
- ✓Strong magnetic adsorption to keep the base stable on the bench
- ✓360-degree rotary buckle for working at any angle
- ✓Air avoidance design, as described in the listing
- ✓Single base for all 19 listed models
- ✓Current 19-in-1 version; the 15-in-1 version is listed as discontinued
- ✓Designed for dot projector flex alignment in Face ID repair workflows
Specifications
| Brand | i2C |
|---|---|
| Model | i2C 19-in-1 Face ID Dot Matrix Fixture |
| Category | Face ID Dot Matrix Calibrator Fixture |
| Compatibility | iPhone X to iPhone 14 Pro Max |
| Supported Devices | iPhone X, XS, XS Max, XR, 11, 11 Pro, 11 Pro Max, 12 Mini, 12, 12 Pro, 12 Pro Max, 13 Mini, 13, 13 Pro, 13 Pro Max, 14, 14 Plus, 14 Pro, 14 Pro Max |
| Technology | Magnetic adsorption, 360-degree rotary buckle, air avoidance design |
| Material | High-hardness transparent acrylic base |
Common Repair Uses
- ✓Aligning a replacement dot projector flex before it is secured on iPhone X to 14 Pro Max boards
- ✓Positioning the flex on the bench before testing Face ID setup
- ✓Rechecking placement when Face ID setup returns “Move iPhone a little lower/higher”
- ✓Holding a dot projector flex steady during dot matrix data work with a separate programmer
- ✓Confirming flex alignment before final reassembly of the front sensor assembly
- ✓Repeating the same alignment across several units of one model in a single session
- ✓Standardizing dot projector placement across a shared bench for 19 iPhone models
- ✓Supporting dot projector flex replacement workflows from iPhone X to iPhone 14 Pro Max
Compatible Devices
- ✓Verified scope: 19 iPhone models, iPhone X through iPhone 14 Pro Max
- ✓iPhone X, iPhone XS, iPhone XS Max, iPhone XR
- ✓iPhone 11, iPhone 11 Pro, iPhone 11 Pro Max
- ✓iPhone 12 Mini, iPhone 12, iPhone 12 Pro
- ✓iPhone 12 Pro Max
- ✓iPhone 13 Mini, iPhone 13, iPhone 13 Pro
- ✓iPhone 13 Pro Max
- ✓iPhone 14, iPhone 14 Plus
- ✓iPhone 14 Pro, iPhone 14 Pro Max
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Does this fixture support iPhone 15 and newer models?
Is the 19-in-1 version different from the 15-in-1 calibrator?
Related products
RELIFE RL-004SA silicone pad – Anti-slip
In stock
UFI eMMC BGA Soldering Adapter (8 Footprints) for UFI-Box
In stock



