Kailiwei K-060W Soldering Pen 60W

₨ 750

Kailiwei 60W Pen for Board Repair

The Kailiwei K-060W soldering pen 60W gives your bench a pen-format iron rated at 60 watts. You reach for it on charging port work, battery connector jobs, jumper wires and pad cleanup after an IC change. Pen-style handling keeps your wrist position natural during long repair sessions, and the 60W class covers the general soldering tasks that fill a mobile repair day. Mechanicpk lists the K-060W for technicians and workshops that want a dependable second iron beside the main soldering station. Pair it with a hot air station and a PCB holder, and you cover most hardware fault jobs that come through a Pakistani repair shop.

In stock

10 People watching this product now!
Description

Kailiwei K-060W Soldering Pen 60W for Everyday Board-Level Soldering

The Kailiwei K-060W soldering pen 60W adds a pen-format iron rated at 60 watts to your repair bench. That power class suits steady heat on connectors, large pads and jumper wires. Many workshops run it beside the main station, so the fine-pitch tips stay clean for delicate work while the pen takes the rougher jobs. Kailiwei makes soldering and rework tools for the repair trade, and the K-060W follows the pen layout that technicians already use daily.

Where a 60W Pen Fits in Mobile Repair

A 60W iron sits between a micro-tip precision pen and a heavy mains iron. On a mobile board, that middle position fits the jobs that need real heat but no hot air. Charging issue repairs top the list: you lift a damaged USB port, clean the pads and fit a new one. Battery connectors, SIM tray pins and vibration motor contacts follow the same pattern. When a dead phone comes in after a drop, you often trace a broken track and handle the fix with a jumper lagana job, then finish it with this pen. The same iron also tins wires, rebuilds ground contacts on shield frames and cleans old solder from pads after IC change karna.

Bench Workflow With the K-060W

Start with flux on the pad, tin the contact and place the part. Match the tip to the pad size before you heat anything, because a tip that is too large drags neighbouring components with it. Hold your board in a PCB holder and work under a microscope so you see bridges the moment they form. After every joint, check for shorts with a multimeter before you power the board. When the job moves from pad work to an IC, hand it over to your hot air station, and use reballing kits for BGA parts. The pen then returns for pad cleanup. This split keeps each tool in the role it handles best and protects your boards from overheating.

Buying Notes for Shop Owners

Shops with several technicians buy one pen per bench, so nobody swaps tips or borrows an iron mid-repair. A pen-format 60W iron stays easy to store, replace and hand to a new technician. Pair the K-060W with a soldering station for fine-pitch components and a hot air station for ICs, and your team covers the full range of hardware repair work without crowding one tool with every task. Mechanicpk lists the Kailiwei K-060W soldering pen with confirmed brand, model and power information, so you buy against a known rating instead of guesswork.

Additional information
Weight0.25 kg
Q & A
Please login to post questions

Key Features

  • Pen-format iron rated at 60W
  • Kailiwei brand, built for the soldering and rework trade
  • Pen grip suits close-range board work
  • Handles connector, pad and jumper wire soldering
  • Works as a second iron beside a soldering station
  • Fits workshops that assign one iron per technician

Specifications

BrandKailiwei
ModelK-060W
CategorySoldering Pen
CompatibilityUniversal — not device-specific
Power Rating60W

Common Repair Uses

  • Board-level soldering tasks in mobile repair workshops
  • Charging port replacement for charging issue faults
  • Battery connector re-soldering
  • Jumper wire fitting on broken tracks
  • Pad cleaning after IC change
  • Ground contact and shield frame soldering
  • Wire tinning and lead attachment
  • Vibration motor and speaker contact soldering
  • General through-hole and wire soldering on repair benches

Compatible Devices

  • Universal — the pen is a general soldering tool and not tied to specific phone models or chipsets
  • Android phone mainboards (board-level soldering)
  • iPhone logic boards (pad and connector work)
  • Charging port and USB connector pads
  • Battery connector pads
  • SIM tray and memory card connector pins
  • Flex cable and FPC contact pads
  • Jumper wire and broken track repair points
  • Ground contacts and shield frame pads

FAQ

What is the product name?
The product name is Kailiwei K-060W Soldering Pen 60W.
What is the brand of this product?
The brand of this product is Kailiwei.
What is the model of this product?
The model of this product is K-060W.
What is this product used for?
This product is used for board-level soldering in mobile repair, including charging ports, battery connectors, jumper wires and pad cleanup.
Which devices are compatible with this product?
This product is a universal soldering tool and works with any mobile board you can reach with a soldering iron. It is not tied to specific phone models.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Is a 60W soldering pen enough for mobile board repair?
Yes for connectors, charging ports, jumper wires and pad cleanup. For BGA ICs and fine-pitch chips, use a hot air station and a soldering station with a fine tip.
Can the Kailiwei K-060W replace a hot air station for IC change?
No. A soldering pen handles pads, connectors and wires. IC removal and reballing need a hot air station and reballing kit.