Mijing M22 Pro Magnetic Pad for BGA Reballing
₨ 1
Mijing M22 Pro Reballing Pad
The Mijing M22 Pro is a 4-in-1 magnetic silicone pad for BGA reballing and chip cleanup on your repair bench. It offers 0.3 mm, 0.4 mm, 0.7 mm and 0.8 mm depths across both sides, so you seat different BGA chips firmly before you start tin planting. High-temperature-resistant, corrosion-resistant silicone handles repeated rework cycles, and the strong magnetic surface keeps small metal components from wandering. This BGA reballing magnetic pad suits CPU and eMMC work. It measures 113 × 70 × 6 mm and weighs 67 g, so it fits any bench setup without crowding your hot air station.
Out of stock
BGA Reballing Magnetic Pad Built for Repeatable Chip Work
The Mijing M22 Pro is a BGA reballing magnetic pad that gives your chip a stable, heat-tolerant seat during tin planting and glue cleanup. Chips that slide, tilt or scorch the surface beneath them cost every workshop time, and a failed reball often turns a repairable dead phone into a write-off. This 4-in-1 silicone pad tackles that problem with a magnetic surface and four depth options across its two sides, so you secure the chip first and then work the pads without fighting your fixture. Mechanicpk supplies it to technicians who handle BGA CPU, eMMC and similar chips on the bench every day.
Four Depths Across Two Sides
The M22 Pro carries 0.3 mm, 0.4 mm, 0.7 mm and 0.8 mm depths on both faces. You pick the depth that matches the chip in your hand, and the silicone holds the package level while you work. A level chip means solder paste or balls land evenly across the pads, and even coverage drives a clean reball. Thin and thick packages each find a suitable seat, so you skip the habit of swapping fixtures halfway through a job. Flip the pad to reach the other depth pair, drop the chip in, and start your tin planting. Technicians who run a mix of CPU and eMMC jobs in one shift benefit most from that range.
Silicone Body and Strong Magnetic Hold
The body uses high-temperature-resistant, corrosion-resistant silicone that tolerates repeated heating and wear at the rework bench. The surface also carries strong magnetic adsorption, which holds small metal components in place and reduces the risk of lost parts during BGA, CPU and eMMC repairs. The pad measures 113 × 70 × 6 mm and weighs 67 g, so it sits flat on a bench mat or PCB holder without taking space from your hot air station and microscope. Mijing offers it in green and gray, which lets you keep separate pads for separate jobs if you prefer.
Where It Fits in Your Repair Workflow
Board-level repair on a phone with a hardware fault often ends the same way: you lift the chip with your hot air station, clean the residue, and reball before you refit it. The M22 Pro sits in the middle of that sequence. Mijing positions it for BGA, CPU and eMMC cleanup and degumming, plus tin planting, so one pad covers glue removal and reballing prep. Pair it with a reballing kit and stencils for the planting step, a microscope to inspect pad condition, and a soldering station for touch-up work. Technicians doing IC change karna jobs or eMMC reballing on a dead phone get a repeatable setup instead of a fresh improvisation each time. The compact footprint also makes the pad easy to carry between your bench and a customer visit, and the single-pad design keeps your toolkit simple as your chip jobs grow. Order it alongside your reballing kit and PCB holder to complete the bench.
| Weight | 0.67 kg |
|---|
Key Features
- ✓4-in-1 multifunctional magnetic pad for BGA reballing
- ✓0.3 mm, 0.4 mm, 0.7 mm and 0.8 mm depths on both sides
- ✓High-temperature-resistant silicone body
- ✓Corrosion-resistant and wear-resistant material
- ✓Strong magnetic adsorption for small metal components
- ✓Compact 113 × 70 × 6 mm size
- ✓Lightweight 67 g body
- ✓Available in green and gray
Specifications
| Brand | Mijing |
|---|---|
| Model | M22 Pro |
| Category | BGA Reballing Tools |
| Compatibility | Universal — BGA CPU and eMMC chips, not device-specific |
| Technology | Magnetic adsorption, dual-sided multi-depth silicone surface (0.3 / 0.4 / 0.7 / 0.8 mm) |
| Material | High-temperature-resistant, corrosion-resistant silicone |
| Dimensions | 113 × 70 × 6 mm |
| Weight | 67 g |
Common Repair Uses
- ✓Reballing, tin planting and glue cleanup on BGA chips at the repair bench
- ✓BGA CPU reballing and tin planting
- ✓eMMC reballing
- ✓Glue and residue cleanup (degumming) on BGA chips
- ✓Holding the chip level during stencil work
- ✓Protecting the bench surface from heat during rework
- ✓Keeping small metal components in place with the magnetic surface
Compatible Devices
- ✓Universal — chip-level compatibility with BGA CPU and eMMC packages; not tied to specific phone models
- ✓BGA CPU chips
- ✓eMMC chips
- ✓BGA ICs that fit the 0.3 mm, 0.4 mm, 0.7 mm or 0.8 mm depth options
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Which chip depths does the Mijing M22 Pro support?
Can I use the Mijing M22 Pro for both BGA CPU and eMMC chips?
Related products
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock
RELIFE RL-004SA silicone pad – Anti-slip
In stock



