Koocu SI-02 Adjustable Ceramic Soldering Iron
₨ 800
Adjustable Ceramic Soldering Iron
The Koocu SI-02 is a ceramic soldering iron for mobile repair work that gives you adjustable heat from 200°C to 480°C. You set the temperature to match the pad, the solder alloy, and the component in front of you, whether you re-tin a charging port joint, fix a lifted trace with a jumper, or clean pads after IC removal. The ceramic heating element supports quick heat-up and stable temperature control, and the lightweight, ergonomic handle keeps your hand steady across long repair sessions. Mechanicpk lists the SI-02 for technicians, repair shops, and service centers across Pakistan that need a dependable bench iron for board-level soldering.
Out of stock
Ceramic Soldering Iron for Mobile Repair: Koocu SI-02 Overview
The Koocu SI-02 is a ceramic soldering iron for mobile repair benches that need controlled heat instead of a fixed-temperature pencil iron. A ceramic heating element feeds the tip, and an adjustable range of 200°C to 480°C lets you match heat to the joint in front of you. Mechanicpk lists it for technicians who handle board-level work every day: charging port joints, flex connector pads, jumper wires, and small passive components on dead phone motherboards.
Temperature Control for Mixed Board Work
Phone motherboards pack thin flex pads, heavy ground planes, and heat-sensitive neighbours within a few millimetres of each other. A fixed-temperature iron forces a compromise on every one of them. The SI-02 gives you an adjustable adjustable temperature soldering iron range from 200°C to 480°C, so you set the heat for the joint instead of bending the joint around the iron. Lower settings suit leaded solder and pads near connectors and plastic parts. Higher settings give you headroom for lead-free alloys and for copper planes that pull heat away from the tip. The ceramic heating element supports quick heat-up and steady temperature control, which keeps your time on the board short. Tin the tip before each session, set the temperature first, and touch the pad only long enough to flow the solder. That routine protects pads on boards that have already survived one repair.
Where the SI-02 Fits in Your Repair Workflow
Use this iron for pin-level and pad-level work: charging port joints on a charging issue, jumper lagana on lifted traces, replacing small passive components, and re-tinning pads after you remove a chip. BGA package removal needs a hot air station, and reballing needs a reballing kit with stencils. The SI-02 handles the cleanup that follows, such as wicking old solder off the pads. A typical sequence runs like this: inspect the board under a microscope, set a conservative temperature, flux the pad, apply solder, then confirm the joint with a multimeter continuity check. A PCB holder keeps the board steady through every step. Because an iron heats only the joint, it suits simple hardware fault cases on a dead phone without heating the whole board. If you build a bench from scratch, start with a soldering station or this iron, then add hot air and a microscope as your jobs grow more complex.
Build and Handling at the Bench
A lightweight, ergonomic handle reduces hand fatigue when you solder small joints for hours. The build uses durable materials for a long working life, and the listed safeguards against overheating and electrical faults add a layer of protection on a busy bench. Inspect the cable and plug before each shift, keep the tip tinned, and rest the iron in a stand so the hot tip stays clear of the board and your bench mat. Repair shop owners who equip several benches get one consistent tool for every technician, which simplifies training and tip replacement across the shop.
| Weight | 0.85 kg |
|---|
Key Features
- ✓Adjustable temperature from 200°C to 480°C
- ✓Ceramic heating element for quick heat-up and stable temperature control
- ✓Lightweight, ergonomic handle that reduces hand fatigue
- ✓Safeguards against overheating and electrical faults
- ✓Durable build for daily workshop use
- ✓Suited to electronics repair and intricate soldering tasks
- ✓Lets you set low heat for flex pads and higher heat for ground planes
- ✓Fits alongside hot air stations, microscopes, and PCB holders on a repair bench
Specifications
| Brand | Koocu |
|---|---|
| Model | SI-02 |
| Category | Soldering Iron |
| Compatibility | Universal — general-purpose electronics soldering, not device-specific |
| Technology | Ceramic heating element with adjustable temperature control, 200°C to 480°C |
Common Repair Uses
- ✓Pin-level and pad-level soldering during mobile phone board repair
- ✓Charging port joint resoldering for charging issue repairs
- ✓Jumper wire repair on broken or lifted traces
- ✓SMD passive component replacement
- ✓Pad cleaning and re-tinning after IC change karna
- ✓Solder bridge removal
- ✓Connector pin resoldering
- ✓Battery connector pad repair
- ✓Wire attachment to test points
Compatible Devices
- ✓Universal — general-purpose soldering tool, not tied to specific phone models or chipset families
- ✓Smartphone motherboards (general board-level soldering)
- ✓Charging port and connector joints
- ✓Flex cable and FPC pads
- ✓SMD passive components such as resistors and capacitors
- ✓Through-hole components
- ✓Jumper wire repairs on lifted traces
- ✓Pads after IC or BGA removal (cleanup and re-tinning)
- ✓Tablet and other small electronics boards
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Can the Koocu SI-02 solder lead-free alloys on mobile boards?
Can the Koocu SI-02 replace a hot air station for IC removal?
Related products
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock
Qianli 011 16-in-1 Glue Removal Knife for Mobile Repair
Out of stock



