Relife RL-093C 0.5mm Chip Heat Sink Copper Sheet (50 Pcs)

₨ 999

Relife RL-093C Copper Heat Sink Sheet

The Relife RL-093C copper heat sink sheet gives your repair bench a 0.5mm copper plate for pulling heat away from a CPU or chip during mainboard work. Each pack contains 50 ultra-thin copper pieces, so you cover dozens of boards with a single purchase. The 0.5mm grade sits at the thick end of the RL-093 series, which also offers 0.1mm and 0.3mm variants. Mechanicpk supplies this Relife thermal accessory to Pakistani repair shops and service centers that run hot air stations and soldering stations every day. Use it for heat management during rework, diagnostics, and chip-level repair.

In stock

16 People watching this product now!
Description

Relife RL-093C Copper Heat Sink Sheet for Board-Level Repair

The Relife RL-093C copper heat sink sheet gives your repair bench a 0.5mm copper plate built to spread heat away from a chip while you work on the mainboard. One pack holds 50 ultra-thin copper pieces, so a single box supports a full month of rework jobs in a busy shop. Mechanicpk supplies this Relife part to technicians who already run a hot air station, a soldering station, and a PCB holder, and who want tighter thermal control around the CPU and surrounding ICs.

Technical Profile of the 0.5mm RL-093C

Relife sells the RL-093 series in three thicknesses: 0.1mm for the RL-093A, 0.3mm for the RL-093B, and 0.5mm for the RL-093C. The C variant gives you the most copper mass in the range. More mass lets the sheet absorb and spread more heat before the temperature at one spot climbs. Copper moves heat sideways across its surface faster than plastic or aluminium spacers, so the plate evens out hot spots instead of letting them build under a single point. The series format measures 12.45 x 14mm, a compact footprint that suits small chip surfaces on a phone mainboard.

Where RL-093C Fits in Your Repair Workflow

Board-level repair concentrates heat on one component while neighbouring parts sit within reach of the same hot air stream. When you do an IC change karna job on a dead phone, the airflow warms the CPU and memory area around the target chip. A copper sheet gives you a thermal buffer in that zone while you reflow, reball, or lift a component. The sheet also helps during diagnostics. When you chase a heat-related hardware fault, such as a charging issue or a hang on logo that appears only after the board warms up, a copper plate lets you hold a chip at a steadier temperature while you probe with a multimeter under the microscope. The workflow ties directly into reballing kits, stencils, and flux, because each step in a reflow job adds heat that a copper sheet helps you manage.

Choosing Between 0.1mm, 0.3mm and 0.5mm

Thickness decides how the sheet behaves on your bench. Pick the 0.5mm RL-093C when you want maximum thermal mass and the gap between the chip and the shield or frame allows the extra height. Pick the thinner 0.1mm or 0.3mm grades when clearance runs tight and every tenth of a millimetre counts. Many shops stock all three thicknesses and match the sheet to the board in front of them. If you already use the RL-093A or RL-093B, the RL-093C gives you the upgrade path for jobs that demand more heat absorption.

What You Get in the Pack

Each RL-093C pack contains 50 copper sheets. The quantity suits shops that handle repair volume across multiple technicians, since a loose sheet disappears easily on a busy bench. Store the pack in a dry drawer next to your tweezers and microscope accessories, and keep the sheets flat so they stay ready for the next board. Order the RL-093C from Mechanicpk alongside your hot air station, test box, and PCB holders to build a complete thermal-control setup for chip-level repair.

Additional information
Weight0.1 kg
Q & A
Please login to post questions

Key Features

  • 0.5mm copper plate, the thickest grade in the Relife RL-093 series
  • 50 pieces per pack for high-volume repair workshops
  • Ultra-thin sheet profile designed for chip surfaces on mainboards
  • Copper material for fast, even heat spreading
  • Compact 12.45 x 14mm series format
  • Part of a three-grade range (0.1mm, 0.3mm, 0.5mm) for different clearance needs
  • Pairs with hot air stations, soldering stations, and reballing kits
  • Genuine Relife repair accessory for professional technician benches

Specifications

BrandRelife
ModelRL-093C
CategoryHeat Sink Copper Sheet / Thermal Management Accessory
CompatibilityUniversal — not device-specific
MaterialCopper
Dimensions12.45 x 14 x 0.5mm

Common Repair Uses

  • Heat management during board-level repair, rework, and diagnostics
  • Heat spreading on a chip during hot air rework
  • Thermal buffering near the CPU during IC change karna
  • Cooling support during reballing jobs
  • Holding steadier chip temperature during diagnostics
  • Heat control during soldering near sensitive ICs
  • Thermal support for CPU repair on mainboards
  • Heat dissipation during maintenance of electronic circuits
  • Thermal accessory for PCB repair benches

Compatible Devices

  • Universal copper heat sink sheet — not tied to a specific phone brand or model; fits chips and mainboard areas with matching footprint and clearance
  • Mobile phone mainboard CPU and SoC areas
  • Memory and storage chip surfaces on repair boards
  • Power management IC surfaces
  • Small BGA chip packages on phone PCBs
  • Laptop and tablet mainboard chips
  • Electronic circuit boards in general repair work
  • Chips with enough clearance for a 0.5mm plate
  • Chips under test during diagnostics

FAQ

What is the product name?
The product name is Relife RL-093C 0.5mm Chip Heat Sink Copper Sheet.
What is the brand of this product?
The brand of this product is Relife.
What is the model of this product?
The model of this product is RL-093C.
What is this product used for?
This product is used for spreading and dissipating heat from CPUs and chips during mainboard repair, rework, and diagnostics.
Which devices are compatible with this product?
This product is a universal copper heat sink sheet and is not tied to a specific phone brand or model. It suits chips and mainboard areas that match its footprint and clearance.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
What is the difference between Relife RL-093A, RL-093B, and RL-093C?
All three belong to the Relife RL-093 series of copper heat sink sheets. They differ in thickness: RL-093A measures 0.1mm, RL-093B measures 0.3mm, and RL-093C measures 0.5mm.
How many copper sheets come in one Relife RL-093C pack?
One Relife RL-093C pack contains 50 copper sheets.