Mechanic V70 Heat Insulation Mat for Mobile Repair
₨ 2,200
Magnetic Heat Insulation Repair Mat
The Mechanic V70 heat insulation mat for mobile repair gives your bench a 51.5 x 36.5 cm protected work surface with a dedicated magnetic area. The 4 mm body stays flat under mainboards, PCB holders and tool trays, and the magnetic section keeps small screws in one place while you open the device. The listed heat resistance runs about 120°C to 150°C, which suits bench protection during soldering, IC rework and board cleaning. Technicians, repair shops and service centers across Pakistan use it as a standard bench layer for smartphone and small-board repair. The pack contains one blue V70 repair mat.
In stock
Heat Insulation Mat for Mobile Repair Benches
The Mechanic V70 heat insulation mat for mobile repair gives your bench a 51.5 x 36.5 cm protected surface with a dedicated magnetic area. Board-level repair puts a hot air station, a soldering iron, a microscope and a handful of tiny screws within a few inches of each other. This mat separates that activity from your table top, keeps hardware in one place and gives every job a defined working zone. Mechanicpk supplies the V70 in blue for technicians, repair shops and service centers across Pakistan.
Size, Thickness and Heat Rating
The V70 measures 51.5 x 36.5 cm and runs about 4 mm thick. That body stays flat under a phone mainboard, a PCB holder and a tool tray at the same time. At 0.89 kg, the mat holds its position when you pull a ribbon cable or press a shield back into place. The listed heat resistance is about 120°C to 150°C. Treat that figure as a bench-protection rating: the mat shields your desk from radiated heat and brief tool contact, while you keep the hot air nozzle aimed at the IC and off the mat surface during long rework passes. Pair it with a hot air station and a soldering station from the same catalog to build a complete rework bench.
Magnetic Zone for Screw and Part Control
The built-in magnetic section holds steel screws and small parts, so you stop chasing them across the bench after you open a Samsung, Oppo, Vivo or Infinix frame. Lay your screws out by position next to the board you work on, and each one returns to its original hole when you close the phone. That habit prevents the mix-ups that turn a simple charging issue job into a long one. Keep the magnetic area clear of loose components you do not want to pick up, and keep steel tools in your hand rather than on the board.
Where It Fits in Your Repair Workflow
You use the V70 across the whole sequence: opening the device, separating the display, IC change karna on the mainboard, reballing, flux cleaning and final refit. On a dead phone job you move between multimeter checks, jumper lagana on test points and hot air work, and the mat gives each step the same stable surface. Set your microscope beside it for inspection, and park PCB holders and reballing kits on the same mat so every tool stays within reach.
The product listing also names drone repair as a use, so a workshop that services small drone boards can run those jobs on the same mat. Shops with several benches benefit from putting one V70 on each station, because every technician then works from the same layout and the same protection level.
| Weight | 0.31 kg |
|---|
Key Features
- ✓51.5 x 36.5 cm working surface for boards, holders and tools
- ✓About 4 mm thickness for a flat, stable bench layer
- ✓Listed heat resistance of about 120°C – 150°C
- ✓Dedicated magnetic area that holds small screws and parts
- ✓0.89 kg weight keeps the mat in place during work
- ✓Blue finish
- ✓Universal fit for any repair bench
- ✓Single-mat pack ready for immediate bench use
Specifications
| Brand | Mechanic |
|---|---|
| Model | V70 |
| Category | Repair Mat / Heat Insulation Work Pad |
| Compatibility | Universal bench-level use, not device-specific |
| Technology | Heat insulation surface with integrated magnetic area |
| Heat Resistance | Approx. 120°C – 150°C |
| Dimensions | 51.5 x 36.5 cm, approx. 4 mm thick |
| Weight | 0.89 kg |
Common Repair Uses
- ✓Opening and disassembling phones
- ✓Soldering iron work on board components
- ✓IC change karna with a hot air station
- ✓Reballing preparation and cleanup
- ✓Charging port and charging issue repair
- ✓Flux and board cleaning
- ✓Screw sorting during display problem repairs
- ✓Small drone board servicing
Compatible Devices
- ✓Android smartphone mainboards (Samsung, Oppo, Vivo, Infinix, Tecno)
- ✓iPhone logic boards
- ✓Xiaomi and Realme mainboards
- ✓Tablet motherboards
- ✓Smartwatch boards
- ✓Small drone boards
- ✓Display and flex assemblies during separation
- ✓Daughter boards and charging port boards
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
What is the heat resistance of the Mechanic V70 mat?
Does the Mechanic V70 mat have a magnetic area for screws, and what is its size?
Related products
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock
UFI eMMC BGA Soldering Adapter (8 Footprints) for UFI-Box
In stock



