2UUL DA81 Rechargeable Polish Drill Pen for Mobile Repair
₨ 5,200
Cordless DA81 Polishing Pen
The 2UUL DA81 gives your bench a cordless IC grinding pen with three speed settings and forward/reverse rotation. A built-in rechargeable lithium-ion battery and USB charging free you from power cables. Its 2.35 mm collet takes standard grinding, cutting, drilling and polishing heads. You use it to trim CPU shields, clear underfill epoxy, grind chip surfaces during IC change karna jobs, and clean OCA glue from frames. The slim aluminum alloy body fits your fingers like a pen, so you keep steady control near fine pads. Mechanicpk supplies the DA81 to technicians and repair shops across Pakistan.
In stock
DA81 Polishing Pen for Mobile Repair: Cordless Board-Level Grinding
The 2UUL DA81 polishing pen for mobile repair gives your bench a cordless tool built for one job: removing material from a board without shaking the work. It runs on a built-in rechargeable lithium-ion battery, charges over USB, and spins 2.35 mm shank heads at one of three speeds. If you handle hardware fault boards every day, the DA81 removes the cable drag and vibration that make older grinding pens risky near fine pads. Technicians and repair shops across Pakistan use this class of pen for IC change karna, shield trimming and glue cleanup.
Rotation, Speed Control and Grip
The DA81 uses a three-speed system, and you cycle through low, medium and high with the speed button. Match the speed to the material. Run slower for pad cleaning and epoxy near a chip edge, and run faster for shield cutting and metal work. Separate buttons control on/off and reverse, so you change rotation direction mid-job without swapping heads. Reverse matters when a bur grabs, because it lets you back out and clear debris.
The aluminum alloy body follows a long-gourd profile that sits naturally between your fingers. The rotation stays smooth at speed, so your cuts follow the line you set instead of skipping across the surface. That stability makes this cordless grinding pen for motherboard work a safer choice for IC chip grinding than a vibrating pen.
Heads, Compatibility and Charging
The collet accepts grinding heads with a 2.35 mm shank. That covers burs, cutting discs, drill heads, wire brushes and polishing wheels in that size, including DA82 replacement tips made for 2UUL pens. The pack includes grinding heads of different specifications and a USB cable. Head count varies between packs, so check the contents of your unit. Buy extra heads as your jobs demand: a fine bur for IC edges, a cutting disc for brackets and board sections, a wire brush for cleaning.
You charge the pen through USB, so any charger or power bank on your bench tops it up. Run time changes with speed and load, so charge before a long session of epoxy removal.
Where the DA81 Fits in Your Repair Workflow
A typical dead phone job starts with diagnosis, then heat. You secure the board in your PCB holder, work under the microscope, and lift the IC with your hot air station. The DA81 takes over the mechanical steps around that: removing underfill epoxy, trimming a CPU shield, opening a path to hidden PCB tracks, and cleaning OCA glue from frames. After grinding, you clean the pads, tin them with your soldering station, and prepare the surface for a reballing kit.
The same pen clears the area around test points before you wire ISP pinout connections on a dead after flash board, so your jumpers land on clean copper. Grind in short passes and keep the head moving so heat does not build on the board. Wear eye protection, because metal and epoxy dust fly off at speed.
If your workflow already includes multimeters, test boxes and eMMC or UFS programmers, the DA81 covers the mechanical side of the same repairs. It fills the gap between heat work and soldering work, and it keeps your bench cordless and tidy.
| Weight | 0.51 kg |
|---|
Key Features
- ✓Cordless operation with built-in rechargeable lithium-ion battery
- ✓USB charging
- ✓3-speed settings for different materials
- ✓Forward and reverse rotation
- ✓Low-vibration, high-speed rotation for safer IC chip grinding
- ✓Long-gourd, pen-style aluminum alloy body for a comfortable grip
- ✓2.35 mm collet accepts burs, cutting discs, drill heads, wire brushes and polishing wheels
- ✓Ships with grinding heads and a USB cable
Specifications
| Brand | 2UUL |
|---|---|
| Model | DA81 |
| Category | Mobile Repair Tools / Polishing and Grinding Pen |
| Compatibility | Universal, not device-specific. Accepts 2.35 mm shank grinding heads |
| Technology | Cordless rechargeable lithium-ion battery, USB charging, 3-speed control, forward and reverse rotation |
| Material | Aluminum alloy body |
Common Repair Uses
- ✓IC and CPU chip grinding for chip change jobs
- ✓Removing underfill epoxy around ICs
- ✓Trimming or grinding CPU shields
- ✓Cutting motherboard sections, brackets and screws
- ✓Revealing hidden PCB tracks
- ✓Cleaning OCA glue from frames and parts
- ✓Polishing edges and small metal surfaces
- ✓Light engraving on metal, plastic, glass and ceramic
Compatible Devices
- ✓Android smartphone motherboards
- ✓iPhone logic boards
- ✓CPU and processor IC surfaces
- ✓eMMC and UFS package surfaces
- ✓Metal CPU and board shields
- ✓Phone frames and brackets
- ✓Board screws and metal sections
- ✓2.35 mm shank grinding, cutting, drilling and polishing heads (including DA82 replacement tips)
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
What head size does the DA81 polishing pen accept?
Does the DA81 support reverse rotation and multiple speeds?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock



