Mijing 630S Lead-Free PCB Washing Water

₨ 1,399

Mijing 630S Board Washing Water

Mijing 630S washing water gives your repair bench a dedicated, lead-free and environmentally friendly liquid for cleaning mobile phone boards. You use it at the cleaning step of board-level repair: after water damage, after IC change karna, and after reballing or rework, before you test the board. Mijing lists the 630S in its current range next to its solder wire and nano cleaning sponge, so it fits a bench that treats cleaning as a defined repair stage. Mechanicpk supplies it to technicians, repair shops and service centers across Pakistan who need a dependable consumable for daily motherboard work.

In stock

13 People watching this product now!
Description

Mijing 630S Washing Water for Lead-Free Board Cleaning

The Mijing 630S washing water targets the cleaning stage that sits between a hardware fault diagnosis and a clean board test. Mijing sells it as a lead-free, environmentally friendly washing water, and it belongs to the same range as the brand’s solder wire, nano cleaning sponge and magnetic storage strip. If you run a repair shop in Pakistan, you handle boards with flux residue, dirt and moisture damage every day. A purpose-made washing liquid gives you one consistent product for that job instead of a different improvised solvent on each bench.

Where It Fits in a Board-Level Repair Workflow

Board repair follows a predictable order: diagnose, remove the faulty component, clean the pad area, fit the new part, clean again, then test. The Mijing 630S washing water belongs in both cleaning steps. After a water-damaged phone arrives, you clean the board before you chase a dead phone fault, so corrosion and residue do not hide the real problem. After IC change karna, reballing or charging port replacement, you clean the surrounding area so flux does not cause leakage or false readings during testing. A clean board also makes your microscope inspection more reliable, because you see pads and joints instead of residue.

Lead-Free Formulation and Workshop Handling

Mijing positions the 630S as lead-free and environmentally friendly, which matters in a shop where technicians clean boards for hours every day. A lead-free liquid suits the lead-free solder alloys that many repair benches now use, and it keeps your workflow aligned with that direction. Read the pack label for handling instructions, storage guidance and recommended use before you start, and keep the bottle sealed between jobs. Work in a ventilated area, wear gloves during long cleaning sessions, and let boards dry fully before you power them on. These habits protect both the board and your bench.

Pairing It With the Rest of Your Bench

Cleaning works best as part of a complete setup. Pair the washing water with a hot air station and soldering station for rework, a reballing kit for BGA jobs, and PCB holders that keep the board steady while you clean around ICs. A microscope lets you confirm the result before you move to testing, and a multimeter helps you check for shorts once the board dries. Mijing’s nano cleaning sponge and solder wire sit in the same brand range, so you can build a matching consumables set instead of mixing unrelated products. Mechanicpk carries these categories together, which lets you restock your cleaning, rework and inspection tools in one order.

Additional information
Weight0.4 kg
Q & A
Please login to post questions

Key Features

  • Lead-free formulation
  • Environmentally friendly liquid
  • Made for mobile phone board cleaning
  • Part of the Mijing repair consumables range
  • Matches Mijing solder wire and nano cleaning sponge
  • Suits daily repair shop use
  • Supports clean pads before component fitting
  • Supports cleaner boards before testing

Specifications

BrandMijing
Model630S
CategoryPCB Washing Water / Mobile Repair Cleaning Chemicals
CompatibilityUniversal – not device-specific
TechnologyLead-free, environmentally friendly formulation

Common Repair Uses

  • Cleaning stage of board-level mobile phone repair
  • Washing boards after water damage
  • Cleaning flux residue after IC change karna
  • Cleaning after BGA reballing
  • Preparing pads before component fitting
  • Cleaning around charging ports after replacement
  • Cleaning before microscope inspection
  • Cleaning before testing a dead phone board
  • Routine board maintenance in repair shops

Compatible Devices

  • Universal mobile phone board cleaning – not limited to specific models or chipset families
  • Android smartphone motherboards
  • iPhone logic boards
  • Phone sub-boards and charging port boards
  • Water-damaged phone boards
  • Boards after BGA reballing
  • Boards after IC replacement
  • Boards after hot air rework
  • Phone PCBs inspected under a microscope

FAQ

What is the product name?
The product name is Mijing 630S Lead-Free Environmentally Friendly Washing Water.
What is the brand of this product?
The brand of this product is Mijing.
What is the model of this product?
The model of this product is 630S.
What is this product used for?
This product is used for washing and cleaning mobile phone boards during repair.
Which devices are compatible with this product?
This product is compatible with mobile phone boards in general. It is universal and not tied to specific models or chipset families.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Is Mijing 630S washing water lead-free?
Yes. Mijing sells the 630S as a lead-free, environmentally friendly washing water.
Where does a washing water like the Mijing 630S fit in a board repair job?
You use it at the cleaning stages of board repair: before diagnosis on water-damaged boards, and after IC replacement, reballing or rework, before you test the board.