Relife RL-559-IM Halogen-Free Flux Paste 100g
₨ 2,200
Halogen-Free Flux Paste for Repair
Relife RL-559-IM gives your bench a halogen free flux paste for mobile repair work that demands clean, fast tinning. The milky white, lead-free paste carries high insulation resistance, so it suits phone motherboards, CPU packages, BGA chips, and SMD components. Strong activity and good fluidity help solder flow evenly across pads during reballing and IC rework, and the formula leaves no residue behind. Each 100 g jar supplies a shop or service center for repeated board-level jobs. Pair it with your hot air station, reballing stencils, and microscope for consistent results on every logic board.
In stock
Halogen Free Flux Paste for Mobile Repair Benches
Relife RL-559-IM is a halogen free flux paste for mobile repair that targets precise tinning and reballing on phone motherboards and CPU packages. The milky white paste contains no lead and no halogens, and it leaves no residue after the job. The 100 g jar covers months of bench work, whether you run a single-technician shop or a service center that handles dozens of boards a day.
Distributors in the Pakistani repair market often get asked one question first: does this flux behave on fine-pitch BGA work? The RL-559-IM formula answers that with a viscous, highly active paste that holds its position on the pad and wets solder quickly.
Formula and Technical Behaviour
The paste combines strong activity, good viscosity, and good fluidity in one rosin-based formula. Strong activity breaks down oxide on copper pads so solder tins fast. Good viscosity keeps the paste where you place it, even when hot air airflow pushes against it. Good fluidity lets solder spread evenly across the pad instead of balling up.
Relife formulates RL-559-IM without lead and without halogens. The halogen-free composition lowers the corrosion risk that aggressive fluxes leave on fine traces, and the lead-free formulation matches modern lead-free solder alloys. High insulation resistance means leftover traces of flux do not create leakage paths between closely spaced pads, which matters on dense phone boards. Running tin is fast and produces less smoke than many conventional pastes.
Where It Fits in the Repair Workflow
You reach for RL-559-IM at every stage of board-level soldering. During IC change karna, you spread a thin layer on the pads before you place the new chip, and the paste helps the solder balls collapse cleanly under heat. During BGA reballing, you apply it across the stencil area so every ball seats evenly. During CPU and PGA rework, it supports repeatable reflow across multiple heat cycles.
The paste also supports CSP packages and general SMD work, so one jar covers small passive components, connectors, and larger processor packages. When a dead phone turns out to be a hardware fault on the main board, clean tinning decides whether the repair holds. Technicians who solder jumper wires to ISP pads before an eMMC or UFS read also benefit from a flux that tins fast without residue creeping across neighboring test points.
Apply a small amount with a flux pen, cotton swab, or micro spatula, then heat with your hot air station or soldering station. Work under a microscope and hold the board in a PCB holder for steady results. A reballing kit and a quality multimeter complete the bench setup, and you can browse those categories on Mechanicpk alongside this flux.
Why Buyers Stock the 100 g Jar
The 100 g jar measures roughly 65 mm in diameter and 75 mm in height, so it fits a standard bench drawer or tool tray. A larger jar means fewer reorders for shops that run reballing and IC work daily, and it keeps a consistent flux on hand across multiple technicians. Because the formula carries a no-clean, no-residue profile, you spend less time on post-solder cleanup and more time on the next board.
Relife supplies this model worldwide, and the RL-559-IM name appears across repair-parts catalogs, which makes reordering straightforward. For professional technicians who already trust Relife consumables, RL-559-IM fits directly into an established soldering routine without a workflow change.
| Weight | 0.100 kg |
|---|
Key Features
- ✓Halogen-free formula
- ✓Lead-free formula
- ✓Milky white viscous paste
- ✓Strong activity for fast tinning
- ✓Good fluidity for even solder spread
- ✓High insulation resistance
- ✓No-clean, no-residue finish
- ✓100 g jar for repeated shop use
Specifications
| Brand | Relife |
|---|---|
| Model | RL-559-IM |
| Category | Solder & BGA Flux Paste |
| Compatibility | Universal — not device-specific |
| Supported Devices | Mobile phone PCBs, CPU, BGA, PGA, CSP and SMD components |
| Technology | Halogen-free, lead-free, no-clean rosin-based flux paste |
| Material | Rosin-based flux paste |
| Dimensions | 65 mm diameter x 75 mm height |
| Weight | 100 g (net) |
Common Repair Uses
- ✓Board-level soldering, tinning, and reballing on mobile phone and electronics PCBs
- ✓BGA IC removal and replacement
- ✓BGA reballing with stencils
- ✓CPU rework on phone motherboards
- ✓Pad tinning before component placement
- ✓SMD component replacement
- ✓Hardware fault repair on dead phone boards
- ✓Jumper wire soldering on test and ISP pads
- ✓Clean tinning of lifted or oxidized pads
Compatible Devices
- ✓Universal flux paste — usable on any board or package that needs lead-free tinning, reballing, or rework
- ✓Mobile phone motherboards (PCB level repair)
- ✓CPU and processor BGA packages
- ✓PGA packages
- ✓CSP packages
- ✓BGA memory and storage chips during reballing
- ✓SMD components (resistors, capacitors, connectors)
- ✓Lead-free solder alloy rework
- ✓General electronic PCB soldering
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Is Relife RL-559-IM suitable for lead-free soldering?
Does RL-559-IM leave residue on the board after BGA reballing?
Related products
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock
RELIFE RL-004SA silicone pad – Anti-slip
In stock



