Relife RL-001H 360° Rotating Stepped Storage Box
₨ 2,800
Rotating Storage Box for Mobile Repair Benches
The Relife RL-001H 360° Rotating Stepped Storage Box gives your bench a rotating storage box for mobile repair work, built from a 360° base, stepped tiers and partitioned compartments. You sort tweezers, screwdrivers, solder wire, small parts and phone accessories by type, then reach each group with one turn. Magnetic storage holds screwdrivers, and the solder wire pillar hangs solder wire and pliers beside your soldering station. The unit measures 255 × 130 × 143 mm and weighs about 635.5 g net, so it fits on a crowded repair bench. Order the Relife RL-001H from Mechanicpk for your workshop or service center.
In stock
Rotating Storage Box for Mobile Repair: Reach, Order and Bench Space
The Relife RL-001H 360° Rotating Stepped Storage Box is a rotating storage box for mobile repair benches that keeps tweezers, screwdrivers, solder wire and small parts within one wrist turn of your working hand. Relife combines a rotating base, a stepped tier layout and partitioned compartments in one compact unit, so you sort tools by type and reach each group without dragging the box across the bench. The body measures 255 × 130 × 143 mm and weighs about 635.5 g net, a footprint that fits beside a hot air station, a soldering station or a microscope without crowding any of them.
How the Stepped 360° Layout Works
The base rotates a full 360°, so every compartment comes to you while the box stays in place. That matters during a long board session, when moving a tool tray means lifting your hands off a soldered joint or a half-seated flex cable. The stepped design raises each rear tier above the one in front, so you see and grab tools at the back without reaching over the front row. Partitions let you split the space by tool type, tool size or how often you pick the tool up. A practical setup dedicates one tier to tweezers and blades, one to screwdrivers and spudgers, and one to loose screws and small accessories, so a dead phone strip-down ends with every part in a known place. You spend less time searching and more time on the board, and that faster bench rhythm adds up across a full day of repairs.
Magnetic Storage and the Solder Wire Post
Relife adds a magnetic storage section for screwdrivers and other small steel tools, which saves compartment space and keeps bits from rolling off the bench. A solder wire pillar rises from the unit, so you hang a solder wire spool or a pair of pliers on the box instead of leaving them loose beside the soldering station. That placement shortens the reach between your iron, your wire and your tweezers during IC replacement, reballing prep or charging port repair. The pillar also clears space around your PCB holder, so the board and your hands stay free when you work a hardware fault. Magnetic parking suits the screwdrivers you swap most often, such as Phillips, Torx and pentalobe drivers, because a quick lift and return keeps the set organized.
Where the RL-001H Fits in Your Repair Workflow
Storage does not repair a phone, yet bench order shortens every repair that follows. The RL-001H sits next to your core bench equipment: a soldering station for component work, a hot air station for BGA and connector rework, a multimeter for charging issue and display problem diagnosis, and a microscope for fine inspection. If you run ISP pinout tools, eMMC programmers, UFS adapters and test boxes on the same bench, you also use the box to park probes, tweezers and small accessories between operations, which keeps reballing kits and PCB holders reachable without a hunt through drawers. Service centers and training institutes gain from the same layout, because a shared bench with clear tool zones lets a second technician pick up a job without asking where anything sits. Relife lists the finish as blue/grey, and the package contains one storage rack, so you add it to an existing bench setup without extra assembly parts.
| Weight | 1.0 kg |
|---|
Key Features
- ✓360° rotating base for access from any side
- ✓Stepped tier layout for clear visibility of every tool
- ✓Partitioned compartments for sorting by type, size or use
- ✓Magnetic storage section for screwdrivers and small steel tools
- ✓Solder wire pillar that holds solder wire and pliers
- ✓Compact 255 × 130 × 143 mm footprint
- ✓Light body at about 635.5 g net
- ✓Blue/grey finish with one storage rack in the package
Specifications
| Brand | Relife |
|---|---|
| Model | RL-001H |
| Category | Repair Tool Storage / Bench Organizer |
| Compatibility | Universal, not device-specific |
| Technology | 360° rotating base with stepped tiers and magnetic storage |
| Dimensions | 255 × 130 × 143 mm |
| Weight | About 635.5 g net (about 752 g gross) |
Common Repair Uses
- ✓Sorting tweezers and screwdrivers during screen and battery replacement
- ✓Keeping solder wire and pliers at hand during IC replacement
- ✓Holding small parts and screws in order during phone disassembly
- ✓Staging tools beside a hot air station during BGA and connector rework
- ✓Organizing tools for charging port and display problem repairs
- ✓Parking probes and accessories between ISP, eMMC and UFS operations
- ✓Keeping shared benches in service centers tidy between technicians
- ✓Setting up labeled tool zones on training institute benches
Compatible Devices
- ✓Universal bench accessory. It works with any repair tool kit, not with specific phone models.
- ✓Screwdrivers (magnetic storage section)
- ✓Tweezers
- ✓Solder wire spools (pillar mount)
- ✓Pliers (pillar mount)
- ✓Small repair parts
- ✓Phone accessories
- ✓Small hand tools
- ✓Mixed bench accessories
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Can the Relife RL-001H hold solder wire and pliers?
What are the size and weight of the Relife RL-001H?
Related products
Qianli 011 16-in-1 Glue Removal Knife for Mobile Repair
Out of stock



