2UUL SC16 Mr. Flux 02 No-Clean Flux for Mobile PCB
₨ 1,200
2UUL SC16 Mr. Flux 02 Overview
Mr. Flux 02 is a no-clean soldering flux from 2UUL, model SC16, built for mobile phone motherboard repair. The thick, acid-free, halogen-free formula resists oxidation, spreads solder evenly across pads, and holds BGA, CPU, and SMD components in place while you heat them. Technicians use it for reballing, IC replacement, jumper work, and pad repair on dead phone and charging issue boards. The no-clean formula leaves minimal residue, so you move from soldering to testing faster. Mechanicpk supplies 2UUL SC16 Mr. Flux 02 to repair shops and service centers across Pakistan.
In stock
No-Clean Flux for Mobile Repair: 2UUL SC16 Mr. Flux 02
Poor solder flow ruins more reballs than poor heat control does. The 2UUL SC16 Mr. Flux 02 is a no-clean flux for mobile repair that gives your hot air station and soldering iron a thick, stable medium to work with, so joints form cleanly on motherboard pads. Mechanicpk supplies it to technicians who rework BGA, CPU, and SMD packages every day and need a consistent consumable on the bench. The formula contains no acid and no halogens, resists oxidation, and leaves minimal residue once the joint cools.
How the Formula Behaves on the Board
Mr. Flux 02 comes as a thick liquid, and that consistency does real work. It clings to pads and pins instead of running across the board, so it stays where you place it while you position a chip. The formula offers strong wettability, which means molten solder spreads over the pad and fills the joint instead of beading up. You apply less flux per joint and still get an even finish, which matters when you work on tight pad layouts under a microscope and every extra drop spreads where you do not want it.
Oxidation ruins more rework jobs than most technicians admit. Heated copper pads and component leads oxidise quickly, and that oxide layer blocks solder from bonding. The anti-oxidation action of this flux protects the metal during heating, which supports solid, repeatable joints. The thick formula also helps prevent component shifting, so a small SMD part holds its position until the solder sets. Acid-free and halogen-free chemistry suits fine-pitch board work, where aggressive residue would threaten thin traces.
Where It Fits in Your Repair Workflow
Flux enters the job at nearly every soldering step. On a BGA reball, you coat the pads before you stencil the balls and again before you reflow the chip onto the board. On a CPU or eMMC reattachment, a thin layer under the package helps the balls collapse and wet evenly. On an IC change karna job, you flux the pads, place the new IC, and heat the area with your Hot Air Station. For jumper lagana on a broken trace, you flux the pad and the wire before the iron tip touches them.
Dead phone cases, charging issue faults, and hardware fault repairs after liquid or drop damage all end with solder work, so the flux you pick decides how clean the final joint looks. Check each joint under your Microscope, then confirm continuity with a Multimeter before you close the phone. A PCB Holder keeps the board steady during the process, and a quality Reballing Kit supplies the stencils and solder balls that this flux then helps bond. Many technicians pair the flux with a Soldering Station for pad cleanup and detail work.
Why a No-Clean Formula Saves Bench Time
A no-clean flux leaves minimal residue after soldering, and the product listing states that no cleaning is required. In a busy repair shop that adds up. You skip a wash step on routine jobs and move to the next phone faster. Shop owners and service centers also gain consistency, because every technician works with the same flux behaviour and gets comparable results across daily repairs.
Workshops that handle high repair volume benefit most. A technician who reballs several boards a day uses flux constantly, so a formula that stays put, resists oxidation, and needs no wash step cuts small delays that pile up across a shift. Training institutes also favour a predictable flux, because students learn solder flow on a material that behaves the same way each time.
Choose Mr. Flux 02 when you want a thick flux that holds position and flows under heat without acid or halogens in the formula. Add it to your next tool order from Mechanicpk, and keep a spare on the bench so a rework job never stalls for lack of flux.
| Weight | 0.8 kg |
|---|
Key Features
- ✓Thick liquid consistency for easy handling
- ✓Strong wettability for even solder spread
- ✓Anti-oxidation action during heating
- ✓Helps prevent component shifting during soldering
- ✓Acid-free formula
- ✓Halogen-free formula
- ✓No-clean formula with minimal residue
- ✓Suited to mobile phone PCB, CPU, BGA, and SMD chip repair
Specifications
| Brand | 2UUL |
|---|---|
| Model | SC16 (Mr. Flux 02) |
| Category | Soldering Flux |
| Compatibility | Universal — not device-specific |
| Technology | No-clean, acid-free, halogen-free flux with anti-oxidation action |
Common Repair Uses
- ✓Board-level soldering and rework on mobile phone PCBs
- ✓BGA reballing
- ✓CPU reattachment and reflow
- ✓IC replacement (IC change karna)
- ✓SMD component replacement
- ✓Jumper wire soldering (jumper lagana)
- ✓Pad tinning and repair
- ✓Charging IC replacement on charging issue boards
- ✓Hardware fault repair on dead phone boards
Compatible Devices
- ✓Universal — flux is not device-specific and works on mobile phone PCBs regardless of brand or chipset family
- ✓Mobile phone motherboards and PCBs
- ✓CPU and processor BGA packages
- ✓eMMC and UFS BGA memory chips
- ✓Power management and charging ICs
- ✓SMD components and passive parts
- ✓Component pins and solder pads
- ✓Jumper wire connection points
- ✓BGA reballing and reflow setups
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Is 2UUL SC16 Mr. Flux 02 acid-free and halogen-free?
Do I need to clean the board after using Mr. Flux 02 on a mobile PCB?
Related products
UFI eMMC BGA Soldering Adapter (8 Footprints) for UFI-Box
In stock



