2UUL SC96 Gold Plated FPC Connector Reballing Solder Bar

₨ 900

Gold Plated FPC Connector Reballing Bars

The 2UUL SC96 Gold Plated FPC Connector Reballing Solder Bar pack gives you five ball head bars for tinning the pads of flat flexible connectors on phone motherboards. The rounded tip, which the manufacturer designs to resist scratching the board, lets you drag solder across fine connector pads in tight spaces. Gold plating supports fast tinning, and the replaceable format means you swap in a fresh bar when one wears out. Technicians use it for display, battery, and charging flex connector repair after they clean or replace a connector. The pack ships without a handle. Order it from Mechanicpk for your repair bench in Pakistan.

Out of stock

20 People watching this product now!
Description

FPC Connector Reballing Solder Bar for Precision Connector Tinning

The 2UUL SC96 Gold Plated FPC Connector Reballing Solder Bar gives technicians a purpose-built FPC connector reballing solder bar for one of the most delicate jobs on a phone motherboard: rebuilding solder on the pads of a flat flexible connector. Each pack contains five gold plated bars with a ball head design, so you keep spares on the bench and swap in a fresh bar the moment one wears down. Mechanicpk stocks the SC96 for workshops that repair display, battery, and charging flex connectors every day and want a dedicated consumable for the tinning step.

How the Ball Head Bar Tins Fine Connector Pads

An FPC connector sits on pads with very little spacing, and a sharp tool edge can scratch a pad or the board surface around it. The SC96 uses a rounded ball head, and the manufacturer positions that shape as safer on the board and less prone to scratching than other bar designs. You load solder onto the bar, drag it across the connector pads, and pull the solder along the row until the pads carry an even layer. The gold plating supports fast tinning, and the slim bar format reaches into tight spaces where a conventional iron tip crowds neighboring components. Pair the bar with quality flux, solder paste, a temperature-controlled soldering station, and a microscope so you can judge every pad before you refit the connector. Work with a steady hand and moderate heat, because overheating a pad lifts it from the board and turns a simple tinning job into a trace repair. Clean old solder and flux residue off the pads first, then tin them in one smooth pass so you avoid bridges between neighboring contacts.

Where the SC96 Fits in Your Repair Workflow

FPC connector faults show up as display problems, charging issues, and other hardware faults that trace back to a damaged or lifted connector. When you remove a bad connector or clean lifted pads, those pads need fresh solder before the new connector goes on. The SC96 covers that tinning step: you clean the pads, tin them with the bar, and then place the replacement connector with a hot air station or a soldering iron. Technicians who rework connectors alongside multimeters, test boxes, and PCB holders keep the bars in the same drawer as their reballing kits, so the whole connector job stays at one bench position. A shop that handles many flex cable replacements per week also benefits from the five-bar count, since each bar stays on the bench for a specific job type instead of crossing between display, battery, and dock connector work. Once a dead phone powers up again, the same workflow can continue into software work with ISP pinout tools, eMMC programmers, and UFS adapters.
The pack ships without a handle. Check how you plan to hold the bars before you order, because the handle-equipped version of this series sells as a separate model, the SC98.

Why Buyers Specify the SC96 for Connector Work

Buyers who already know the category choose the SC96 for three reasons: the five-bar pack, the gold plated ball head, and the focus on FPC connector tinning instead of general soldering. A single-purpose consumable keeps your general soldering tips free for other jobs and gives each connector repair a clean, dedicated tool. The pack suits shops that process high volumes of screen and charging flex repairs, and it suits training institutes that want each student to work with a dedicated bar. Mechanicpk supplies connector tinning tools, reballing accessories, and soldering equipment for repair shops and service centers across Pakistan, so you can build the full connector rework station from one catalog. If you run a workshop in Lahore, Karachi, or Islamabad and you reorder consumables on a schedule, the SC96 pack fits straight into that routine.

Additional information
Weight0.3 kg
Q & A
Please login to post questions

Key Features

  • Five replaceable bars in one pack
  • Gold plated bar construction for fast tinning
  • Ball head design that resists scratching the board
  • Drag-tin format built for FPC connector pads
  • Reaches pads in confined spaces
  • Supports FPC connector reballing and tin suction desoldering repair
  • Sold without a handle, so you choose your own holding method
  • Works as a dedicated consumable alongside soldering stations and hot air stations

Specifications

Brand Entity2UUL
Product Entity2UUL SC96 Gold Plated FPC Connector Reballing Solder Bar
Technology EntityGold plated ball head drag-tin bar
Compatible Device EntitiesMobile phone motherboards with FPC connectors (universal)
Repair Process EntityFPC connector reballing and pad tinning
Industry EntityMobile phone repair, PCB rework

Common Repair Uses

  • Pad tinning and reballing for FPC connector replacement on mobile boards.
  • FPC connector reballing
  • Tin suction desoldering repair
  • Re-tinning pads after you remove a damaged connector
  • Display connector repair
  • Charging dock connector repair
  • Battery connector repair
  • Preparing lifted or worn pads before you fit a new connector
  • Fine-pitch connector pad touch-up during board rework

Compatible Devices

  • Universal. The bars suit FPC connector pads and are not device-specific.
  • Universal, not tied to a phone brand or chipset
  • FPC connector pads on mobile phone motherboards
  • Display flex connector pads
  • Battery flex connector pads
  • Charging dock FPC connector pads
  • Other flex cable connector pads on mobile logic boards
  • Small electronics PCBs that use FPC connectors
  • Any repair that needs fresh tin on fine-pitch connector pads

FAQ

What is the product name?
The product name is 2UUL SC96 Gold Plated FPC Connector Reballing Solder Bar.
What is the brand of this product?
The brand of this product is 2UUL.
What is the model of this product?
The model of this product is SC96.
What is this product used for?
This product is used for reballing and tinning the pads of FPC connectors on mobile phone motherboards.
Which devices are compatible with this product?
This product is universal. It works on FPC connector pads and is not tied to a specific phone brand or chipset.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Does the 2UUL SC96 come with a handle?
No. The SC96 ships as a pack of five bars without a handle. The SC98 is the separate model that includes a handle.
Why does the SC96 use a ball head tip?
The ball head design has no sharp edges, which the manufacturer positions as safer on the board and less likely to scratch FPC connector pads.