YCS Hot Air Gun Side-Hanging Self-Locking Sleep Seat
₨ 2,200
YCS Side-Hanging Sleep Seat
The YCS hot air gun sleep seat is a side-mounted, self-locking seat that gives your hot air gun handle a fixed resting position on the rework bench. It keeps the gun out of your working area, holds the handle steady between reflow passes, and suits technicians who run BGA, eMMC, CPU and SMD jobs through the day. YCS lists it as part Y9150102042 in its Rework Stations & Power range. Confirm your gun is a side-hanging YCS model, then order from Mechanicpk for your Pakistan repair shop or service center.
In stock
YCS Hot Air Gun Sleep Seat for a Cleaner Rework Bench
The YCS hot air gun sleep seat gives your rework station a fixed parking spot for the handle, mounted on the side of the unit instead of eating bench space in front of you. YCS lists it as a side-mounted, self-locking sleep seat in its Rework Stations & Power range under part number Y9150102042. If you run a YCS hot air gun on a repair bench in Pakistan, this seat decides where the gun rests between jobs, how securely it sits, and how much room you keep for boards, flux and tweezers.
Why a Side-Hanging Seat Suits a Busy Repair Bench
Every centimetre in front of your microscope counts. A side-hanging seat moves the handle out of your working zone and keeps it within easy reach of your dominant hand. You lift the gun for a reflow pass, set it back, and return to the iron or multimeter without pushing boards around. That rhythm matters when you handle several dead phone boards in a day, from IC change karna jobs to charging port IC rework and screen separation.
The self-locking design holds the handle in place once you seat it. A knocked cable or a bumped table then has less chance of tipping a hot nozzle toward a PCB, a hand or a neighbouring tool. A seat that holds the gun firmly also protects the nozzle tip and the heating element from drops, which are a common reason technicians replace guns early.
Where the Sleep Seat Fits in Your Hot Air Workflow
Hot air work follows a fixed pattern: preheat, pick up the gun, reflow or lift the component, put the gun down, move on. The sleep seat sits at the “put the gun down” step of every pass. It gives the handle a defined resting position, so the gun returns to the same spot every time instead of lying on the mat beside your solder wire.
You use it across the repair tasks that depend on hot air: BGA reballing, eMMC and UFS chip removal, CPU rework, SMD component replacement and board cleaning after a hardware fault. Pair it with your Soldering Stations for through-hole and pad cleanup, a set of Reballing Kits for chip work, PCB Holders to lock the board, and a Microscope for alignment. Test the repaired board with a Multimeter before you close the phone. If your bench still runs a bare Hot Air Station with no dedicated resting seat, this part is the simplest upgrade for a tidier, safer workflow, and it costs far less than replacing the whole rework station.
Match the Seat to Your YCS Gun Before You Order
YCS builds its hot air guns in side-hanging and base-mounted versions. The L7 and R1 Pro lines, for example, appear in both configurations in the YCS catalogue. This product is the side-mounted seat, so it belongs on a bench where your gun hangs on the side of the station. If your gun came with a base-style dock, you already have the matching seat.
The manufacturer page lists the name, part number Y9150102042 and product line only. It does not publish a gun-by-gun fit list, dimensions, weight or material, so this listing leaves those out rather than guess. Send Mechanicpk your exact hot air gun model before ordering, and the team confirms the fit for your setup. That check takes a minute and saves you a wrong-part return.
Technicians who build a complete YCS rework bench, from the gun and nozzles to the seat, keep spare seats on the shelf. A cracked or lost seat should never stop a hot air station that otherwise works perfectly. Keep one spare, and your reflow work continues without delay.
| Weight | 0.15 kg |
|---|
Key Features
- ✓Side-mounted design that keeps the gun out of your front working area
- ✓Self-locking seat that holds the handle in place
- ✓Sleep seat that gives the gun a fixed resting position between passes
- ✓Made by YCS for its hot air rework range
- ✓Listed by YCS under Rework Stations & Power, part Y9150102042
- ✓Works as a replacement or spare seat for side-hanging YCS setups
Specifications
| Brand | YCS |
|---|---|
| Model | Y9150102042 |
| Category | Rework Stations & Power (Hot Air Gun Accessories) |
| Compatibility | YCS hot air gun setups with side-hanging mounting |
| Mounting Type | Side-mounted |
| Function | Self-locking sleep seat |
Common Repair Uses
- ✓Hot air workflows where the gun rests between passes
- ✓BGA reballing and reflow
- ✓eMMC and UFS chip removal
- ✓CPU rework
- ✓SMD component replacement
- ✓Charging port IC rework
- ✓Screen separation
- ✓Board cleaning after a hardware fault
Compatible Devices
- ✓YCS hot air guns in a side-hanging configuration. YCS does not publish a gun-by-gun fit list, so send your exact model to Mechanicpk to confirm.
- ✓YCS hot air gun setups that use a side-hanging mount
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Does this sleep seat fit YCS base-style hot air guns?
Can I use this seat with Quick 861DW or Atten hot air guns?
Related products
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock
UFI eMMC BGA Soldering Adapter (8 Footprints) for UFI-Box
In stock



