YCS Hot Air Gun R1 Stand for Mobile Phone Repair
₨ 5,500
R1 Stand for Safer Hot Air Rework
The YCS Hot Air Gun R1 Stand gives your YCS R1 hot air gun a fixed resting position on the repair bench. You lift the gun, work the board, and set it back down without hunting for a safe spot for a hot nozzle. The YCS R1 runs a smart sleep mode that cools the gun when it rests on the stand and heats it again when you pick it up, so the stand supports your BGA, CPU, and eMMC rework routine directly. Repair shops in Pakistan that run the R1 on dead phone and charging issue boards get a dedicated parking point that keeps the hot nozzle away from the mat, the PCB, and the cables.
In stock
YCS Hot Air Gun R1 Stand: A Dedicated Seat for Your R1 Rework Gun
The YCS Hot Air Gun R1 Stand is the support base for the YCS R1 intelligent hot air gun, the 1000W rework gun built for BGA, CPU, and SMD chip work on mobile phone boards. A hot air gun spends more of its shift resting than blowing air. Between flux application, tweezers work, pad inspection, and testing, the handle needs a fixed place that keeps a hot nozzle away from your ESD mat, plastic fixtures, and flex cables. YCS lists this part separately under part number Y9150102022, and it gives the R1 handle that place.
How the Stand Works With the R1 Sleep Mode
YCS built the R1 around a smart sleep routine. When you set the gun on its stand, the gun cools down automatically. When you pick it up, it heats up again. The stand completes that routine: the R1 cools while it rests and heats the moment you lift it. You pull the gun off the stand, work the chip, and park it again without reaching for a power switch or a temperature dial.
That routine suits the way the R1 itself works. The gun offers curve mode for even temperature and less thermal shock, a large chip mode with fast heating and strong airflow, and a small chip mode with soft airflow for delicate components. It runs four nozzles in 5 mm, 10 mm, 12 x 17 mm, and 13 x 13 mm sizes. You choose the mode at the machine, lift the gun, finish the job, and set it back on the stand. The whole sequence stays short, even on a crowded bench with three boards waiting.
Where the Stand Fits in Your Rework Workflow
A typical dead phone job shows why a stand matters. You lift an eMMC or UFS chip with the R1, set the gun down, clean the pads, and check them under a microscope. You reball with your reballing kit, hold the board in a PCB holder, and reflow the chip. Then you probe the lines with a multimeter and move to ISP pinout testing or an eMMC programmer. The gun rests for most of that sequence, and a stable stand keeps it clear of the test box, cables, and programmer on the same bench.
Charging issue boards and hang on logo faults follow the same pattern on a smaller scale. You change a charging IC or PMIC, park the gun, clean, inspect, and test. Boot loop and dead after flash faults that trace to a memory chip also send the board back to the hot air gun, so the handle goes on and off the stand many times in one shift. Technicians who run hot air stations and soldering stations on one bench use the stand to separate the hot zone from the work zone, and trainers in technical institutes use it to teach students where a hot gun belongs between steps.
Buying Notes for Mechanicpk Customers
Match the stand to your gun before you order. This listing covers the YCS R1 stand. YCS sells separate stand versions for the R1 Pro, so confirm your gun model first and ask our team if you run a different YCS gun. A solo technician needs one stand per bench. Shops with several technicians put a stand at each station so every gun has its own seat and nobody shares a hot handle. If you still run a basic hot air station, the R1 and its stand mark the step up to an intelligent rework setup with curve mode and automatic sleep.
Mechanicpk supplies YCS rework equipment alongside the tools that surround it: hot air stations, soldering stations, microscopes, PCB holders, reballing kits, multimeters, test boxes, ISP pinout tools, eMMC programmers, and UFS adapters. Pair the stand with those categories and you cover the full path from chip lift to read-and-write test.
| Weight | 0.15 kg |
|---|
Key Features
- ✓Dedicated stand for the YCS R1 hot air gun, listed under YCS part number Y9150102022
- ✓Supports the R1 smart sleep routine: the gun cools on the stand and heats when you lift it
- ✓Gives the hot handle a fixed seat so it stays off your ESD mat and fixtures
- ✓Keeps the nozzle away from PCBs, flex cables, and programmer leads
- ✓Speeds up lift-work-park cycles during BGA, CPU, and eMMC rework
- ✓Fits the R1’s curve, large chip, and small chip modes without changing any setting
- ✓Suits one-stand-per-station setups in multi-technician shops
- ✓Works as the natural add-on for an R1 rework setup
Specifications
| Brand | YCS |
|---|---|
| Model | R1 Stand (Part No. Y9150102022) |
| Category | Hot Air Gun Stand (Rework Station Accessory) |
| Compatibility | YCS R1 hot air gun |
| Technology | Smart sleep mode support (gun cools when rested, heats when lifted) |
Common Repair Uses
- ✓Parking the R1 gun between hot air steps in real repair workflows.
- ✓eMMC and UFS chip removal and reflow on dead phone boards
- ✓CPU and BGA chip rework
- ✓Reballing sessions with a PCB holder
- ✓Charging IC and PMIC replacement for charging issue boards
- ✓Memory chip rework after boot loop or dead after flash faults
- ✓Pad cleaning and microscope inspection between heat cycles
- ✓Multi-technician benches that need one gun seat per station
- ✓Technician training in safe hot air gun handling
Compatible Devices
- ✓Verified scope is the YCS R1 hot air gun. The stand is a bench accessory, not a phone-model-specific tool.
- ✓YCS R1 intelligent hot air gun (1000W)
- ✓Universal at board level: the stand never touches the phone, so it suits any board you rework with the R1
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Does this stand support the sleep mode of the YCS R1 hot air gun?
Can I use the YCS R1 stand with the R1 Pro or R1 Ultra?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock
RELIFE RL-004SA silicone pad – Anti-slip
In stock



