Qianli Bumblebee Stencil (QS27) Spreatrum CPU1 BGA

₨ 600

Spreadtrum CPU1 BGA Reballing Stencil

The Qianli Bumblebee Stencil (QS27) Spreatrum CPU1 gives you a dedicated square-hole reballing template for six Spreadtrum processor groups: SC8825C, SC7731C, SC7715A, SC7730A/8830A, SC9850 and SC7731G. Qianli cuts the apertures with rounded corners, so solder balls seat cleanly on the CPU pads. The steel body holds its shape through repeated hot air cycles on your repair bench. Match your chip marking against the supported list before you order, then reball with confidence on entry-level Android boards. Mechanicpk supplies the stencil to Pakistani repair shops and service centers that handle Spreadtrum-based handsets.

In stock

16 People watching this product now!
Description

Qianli QS27 Stencil for Spreadtrum CPU Reballing

The Qianli Bumblebee Stencil (QS27) Spreatrum CPU1 is a square-hole BGA reballing template for a defined group of Spreadtrum (now Unisoc) application processors. The Qianli QS27 stencil belongs to the Bumblebee series, where each model number maps to a specific chip grouping. QS27 maps to the CPU1 group: SC8825C, SC7731C, SC7715A, SC7730A/8830A, SC9850 and SC7731G. If your workshop regularly opens budget Android handsets built on these platforms, one dedicated stencil replaces guesswork with a generic grid.

Technical Profile and Chipset Coverage

Qianli builds the QS27 from steel and cuts square apertures with rounded angles. That aperture shape lets solder paste or pre-formed balls release evenly, which keeps ball height consistent across the pad field. The stencil carries the Qianli model number QS27, so you can reorder the exact template without confusion when a sheet wears out.

Coverage stays chip-specific. The listed CPU1 chips include SC8825C, SC7731C, SC7715A, SC7730A, SC8830A, SC9850 and SC7731G. Qianli sells a separate QS28 (Spreadtrum CPU2) stencil for a different list that includes chips such as SC9832A, SC9830A and SC7727S. Read the marking on the CPU you removed, then confirm it appears in the QS27 list. This check costs you ten seconds and saves a failed reball.

Where It Fits in the CPU Rework Workflow

A Spreadtrum CPU reball follows a fixed sequence, and the stencil sits in the middle of it. First, you lift the chip with a hot air station while a PCB holder keeps the board steady. Next, you clean old solder off the pads with a soldering station and wick, then inspect the pads under a microscope. Now the stencil goes on: align the apertures with the pads, apply flux and paste or balls, and heat until the balls form. After reflow, you seat the CPU back on the board and heat it into place.

Technicians reach for this step when a hardware fault points at the processor: a dead phone that draws current but never starts, a boot loop issue after a drop, or a handset that sticks in a hang on logo state. Run a multimeter check for shorts on the main rails before you power the board. A quick test with your usual box or flash tool then confirms whether the reballed chip boots cleanly.

Why Technicians Buy a Dedicated Stencil

A chip-specific template removes the alignment compromise that comes with universal grids. You place the stencil once, the apertures land on the pads, and the ball layout matches the CPU1 pattern. For a workshop that reballs several Spreadtrum boards a week, that consistency shortens each job and reduces rework.

QS27 also slots into a wider toolkit. Pair it with a Reballing Kit for balls, flux and a stencil holder, and add a quality Hot Air Station if your current one drifts in temperature. When a board also needs storage-side work, move across to eMMC Programmers, ISP Pinout Tools or UFS Adapters from the same category tree. Test Boxes handle the software side once the hardware is solid. The stencil is a low-cost, high-use consumable, and your bench gains a dependable reballing step for every compatible Spreadtrum CPU that comes through the door.

Additional information
Weight0.5 kg
Q & A
Please login to post questions

Key Features

  • Square-hole, round-angle aperture design for even ball formation
  • Steel stencil body built for repeated hot air cycles
  • Dedicated to the Spreadtrum CPU1 chip group
  • Covers SC8825C, SC7731C, SC7715A and SC7731G
  • Covers SC7730A/8830A and SC9850
  • Qianli Bumblebee series model number QS27 for exact reordering
  • Sturdy, precise construction that keeps its shape over time
  • Supplied as a single stencil (1x stencil)

Specifications

Brand EntityQianli (Qianli Bumblebee series)
Product EntityQianli Bumblebee Stencil QS27 Spreadtrum CPU1 BGA reballing stencil
Technology EntitySquare-hole, round-angle BGA stencil reballing
Compatible Device EntitiesSpreadtrum / Unisoc SC8825C, SC7731C, SC7715A, SC7730A, SC8830A, SC9850, SC7731G
Repair Process EntityCPU reballing and BGA rework
Industry EntityMobile phone repair, PCB rework

Common Repair Uses

  • Reballing Spreadtrum CPU1-group processors during board-level repair
  • Reballing a removed Spreadtrum CPU with fresh solder balls
  • Restoring missing or uneven balls on a CPU after lifting
  • Reballing a donor-board CPU before fitting it to a new board
  • Reworking a dead phone after a CPU solder joint fault
  • Addressing a boot loop issue or hang on logo state linked to a poor CPU joint
  • Preparing a CPU for re-soldering after a hot air station lift
  • Batch reballing of budget Spreadtrum handsets in a busy workshop
  • Technician training on BGA reballing technique

Compatible Devices

  • Spreadtrum (Unisoc) CPU1 chip group — chipset-level compatibility, not device-specific
  • SC8825C
  • SC7731C
  • SC7715A
  • SC7730A
  • SC8830A
  • SC9850
  • SC7731G
  • Boards built on the Spreadtrum CPU1 chips above (check the chip marking before use)

FAQ

What is the product name?
The product name is Qianli Bumblebee Stencil (QS27) Spreatrum CPU1.
What is the brand of this product?
The brand of this product is Qianli.
What is the model of this product?
The model of this product is QS27.
What is this product used for?
This product is used for reballing Spreadtrum CPU1-group processors on mobile phone boards.
Which devices are compatible with this product?
This product is compatible with Spreadtrum CPU1-group chips: SC8825C, SC7731C, SC7715A, SC7730A, SC8830A, SC9850 and SC7731G.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Which Spreadtrum chips does the Qianli QS27 stencil support?
The QS27 supports SC8825C, SC7731C, SC7715A, SC7730A, SC8830A, SC9850 and SC7731G.
Can I use the QS27 stencil on an SC9832A CPU?
No. SC9832A is not on the QS27 chip list. Qianli lists SC9832A under the QS28 Spreadtrum CPU2 stencil, so check the marking on your chip before ordering.