Back to products
QianLi 4-in-1 Middle Frame Reballing Platform For iPhone 12, 12 mini, 12 Pro, 12 Pro Max
QianLi 4-in-1 Middle Frame Reballing Platform For iPhone 12 Original price was: ₨ 6,500.Current price is: ₨ 4,200.

RELIFE RL-058 3 in 1 Chip Solder Set for Mobile IC Repair

₨ 600

Chip Solder Set for Mobile Repair

The RELIFE RL-058 3 in 1 packs the three consumables a board-level bench burns through every shift: tube-type BGA solder paste with imported flux, a 183°C medium-temperature tin paste, and pure copper solder wick. You get a ready chip solder set for mobile repair that covers pad tinning, reballing prep, and old solder removal in one pack. The paste carries a fine 20 to 38 micron particle size for a smooth, shiny finish on small pads. It suits technicians who run IC replacement and motherboard rework on dead phone and charging issue jobs.

Out of stock

17 People watching this product now!
Description

RELIFE RL-058 3 in 1: Chip Solder Set for Mobile Repair Benches

Every board-level job ends at the same place: clean pads, fresh paste, and a joint that holds. The RELIFE RL-058 3 in 1 is a chip solder set for mobile repair that bundles the consumables behind that result into one pack. You get tube-type BGA solder paste with imported flux, a medium-temperature 183°C tin paste, and pure copper solder wick that the listing also calls solder tape. The set targets chip soldering problems directly, so it belongs in the drawer of any technician who changes ICs, reflows BGA chips, or re-tins pads on mobile motherboards every day. Instead of chasing three separate items from three brands, you restock the whole routine in one order.

BGA Solder Paste and Wick Set: What Sits Inside the Pack

The set splits into three jobs. The tube-type BGA solder paste contains imported flux, which helps solder flow and wet the pad during reballing and chip attachment. The medium-temperature tin paste melts at 183°C, a common reference point for general IC and component soldering on phone boards. The pure copper solder wick pulls old tin off pads, and the product description notes that a small amount of solder tape removes a large amount of solder. The paste itself is delicate and lasting, with particles of only 20 to 38 microns, so it spreads evenly and leaves a shiny finish. Each item targets a different step of the same repair, which keeps your bench organized and your consumable stock predictable. You pick up the tube, the wick, or the tin paste exactly when the job calls for it. Check the wick before each job and cut off the used section once it fills with solder, so a fresh length keeps absorbing tin cleanly.

Where the RL-058 Fits in Your IC and BGA Workflow

Start with the wick. After you lift a chip with your hot air station or soldering station, drag the copper wick across the pads to clear leftover solder and level the surface. Clean pads decide whether the new chip seats flat, so this step matters more than the paste itself. Next, apply a thin layer of BGA solder paste to tin the pads or to reball the chip, then reflow with controlled heat. Use the 183°C tin paste when the job calls for medium-temperature soldering, and keep your station above that melting point so the paste flows fully. Technicians run this routine on dead phone boards after a failed charging IC, on power IC swaps, and on hang on logo faults that trace back to a weak BGA joint. Pair the set with a microscope for pad inspection, a PCB holder to keep the board steady, and a reballing kit with stencils when you rebuild a full chip.

Choosing This Set for Your Repair Bench

Wick and paste run out first on a busy bench, which makes a three-item pack practical for workshops and service centers that handle IC jobs daily. The RL-058 suits a technician building a first soldering kit and an experienced hand who wants a backup set beside the main paste. Compatibility stays universal. You do not match it to a phone brand or chipset, because it supports the soldering process itself rather than one device family. For heavier rework, step up to dedicated hot air stations and soldering stations, add multimeters for pad and rail checks, and keep separate low- and high-temperature pastes for chips that need different heat. Mechanicpk stocks that full chain, from soldering stations and test boxes to PCB repair accessories, so you can build your repair bench around this set one step at a time. Buy it when you want reliable everyday consumables rather than one-off specialty pastes. If your shop serves walk-in customers, a ready chip solder set for mobile repair also speeds up every chip swap, because the consumables already sit on the bench before you open the phone.

Additional information
Weight0.11 kg
Q & A
Please login to post questions

Key Features

  • Three-in-one chip solder set built around chip soldering problems
  • Tube-type BGA solder paste with imported flux for better soldering effect
  • 183°C medium-temperature tin paste for general IC soldering
  • Paste particles of only 20–38 microns
  • Delicate, lasting, shiny paste finish
  • Pure copper solder wick with strong tin absorption
  • A small amount of solder tape removes a large amount of solder
  • Universal use across mobile phone brands and chipsets

Specifications

BrandRELIFE (Sunshine sub-brand)
ModelRL-058
CategoryChip Solder Set / Soldering Consumables
CompatibilityUniversal, not device-specific
Supported DevicesMobile phone IC boards and PCB assemblies (universal)
TechnologyTube-type BGA solder paste with imported flux; 183°C medium-temperature tin paste; paste particle size 20–38 microns
MaterialPure copper solder wick

Common Repair Uses

  • Board-level soldering, reballing prep, and pad cleaning on mobile PCBs.
  • Reballing prep on BGA chips
  • Re-tinning IC pads on motherboards
  • Removing old solder from pads with copper wick
  • Charging IC replacement on charging issue jobs
  • Power IC replacement on dead phone boards
  • Cleaning pads before a new chip install
  • CPU and memory chip refit after removal
  • Reflowing a weak BGA joint behind a hang on logo fault

Compatible Devices

  • Universal scope. The set supports the soldering process, not a specific phone brand or chipset.
  • Mobile phone logic boards from any brand
  • BGA ICs mounted on mobile phone PCBs
  • Charging and power management ICs on phone boards
  • CPU and memory chips during reballing prep
  • SMD pads that need re-tinning
  • Pads cleaned after chip removal
  • Motherboards under IC-level rework
  • General PCB assemblies that need BGA or SMD soldering

FAQ

What is the product name?
The product name is RELIFE RL-058 3 in 1.
What is the brand of this product?
The brand of this product is RELIFE.
What is the model of this product?
The model of this product is RL-058.
What is this product used for?
This product is used for chip soldering on mobile phone boards, covering BGA reballing prep, pad tinning, and removing old solder.
Which devices are compatible with this product?
This product is compatible with all mobile phone brands and chipsets because it is a universal soldering consumable set, not a device-specific tool.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
What temperature does the tin paste in the RELIFE RL-058 3 in 1 melt at?
The medium-temperature tin paste in the set melts at 183°C, so your hot air station or soldering iron needs to run above that point for a full reflow.
What does the copper wick in the RL-058 set do on a mobile motherboard?
The pure copper solder wick absorbs leftover tin from IC pads after chip removal, and a small amount of solder tape removes a large amount of solder, which leaves pads clean for the new chip.