Sunshine P-3005D 5A 30V DC Power Supply
Sunshine P-3005D 5A 30V DC Power Supply Original price was: ₨ 18,000.Current price is: ₨ 15,500.
Back to products

Amaoe SSD2 BGA Reballing Stencil 0.25mm for SSD NAND

₨ 599

SSD NAND Reballing Stencil, 0.25mm

The Amaoe SSD2 BGA Reballing Stencil gives you a 0.25mm ultra-hard steel template for SSD NAND flash, DDR memory and controller packages. The layout covers DDR4 BGA78 and BGA96, DDR5 BGA82 and BGA102, NAND BGA132, BGA152, BGA154, BGA178, BGA272 and BGA316, plus the 1620 SSD BGA291 controller. Square, precision-cut holes support even solder ball placement, and the reusable steel mesh serves repeated jobs on your repair bench. Mechanicpk supplies this SSD2 BGA reballing stencil to technicians, repair shops and service centers across Pakistan who rework SSD boards at chip level.

In stock

11 People watching this product now!
Description

SSD2 BGA Reballing Stencil for NAND, DDR and Controller Rework

The Amaoe SSD2 BGA Reballing Stencil does one job well: it restores solder balls on SSD memory and controller packages after you lift them from the board. Amaoe cuts the SSD2 template from 0.25mm ultra-hard steel with square apertures, and the layout list covers DDR4, DDR5, NAND and one SSD controller package. If your bench already runs reballing kits for eMMC and UFS chips, this stencil extends the same skills into SSD board repair. This page lists exactly which packages the template covers and where it fits in a rework sequence, so you can match it to the chip on your table before you order. Mechanicpk lists it for buyers who already know their chip package and want a stencil matched to it, not a generic mesh. Technicians searching for an SSD NAND reballing stencil get a package-by-package list here that they can verify against the chip in front of them.

SSD NAND Reballing Stencil Coverage and Build

The SSD2 layout set covers DDR4 BGA78 and BGA96, DDR5 BGA82 and BGA102, NAND BGA132, BGA152, BGA154, BGA178, BGA272 and BGA316, and the 1620 SSD controller in BGA291. Stencil thickness sets how much solder each aperture deposits, and this 0.25mm BGA reballing stencil sits above the 0.15mm that Amaoe uses on its eMMC and UFS stencils. The precision-cut square holes support even ball placement across the pad field. Because the steel mesh is reusable, one stencil serves many chips across repeated jobs. Check the package code printed on your chip against the list above before you buy, since a stencil only works when its aperture map matches the pad map exactly. Each BGA code refers to the package’s ball count and pad layout, so a BGA316 NAND part and a BGA152 NAND part need different apertures even when both sit on the same drive. Amaoe markets the SSD2 in its Super Hard series for professional IC repair, which fits a bench that reuses the template daily.

Where the Stencil Sits in an SSD Rework Workflow

Your sequence starts with removal. You lift the NAND or DDR chip with a hot air station, clean the old solder off the chip pads with flux and a soldering station, and inspect the pads under a microscope. Next you secure the chip in a PCB holder or positioning fixture, align the stencil over the pads, and fill the apertures with solder paste or balls. A controlled reflow forms fresh balls, and a second look under magnification confirms clean, uniform spheres. Before you refit the chip, test continuity with a multimeter so a dead SSD with a hardware fault does not return for the same issue. Technicians who change chips on SSD boards every week rely on this sequence because it makes every stage easy to check. Wipe the stencil with flux remover or isopropyl alcohol after each job so residue does not clog the square apertures on the next chip. Keep the template flat and stored apart from loose tools to protect the mesh between jobs.

Choosing SSD2 Against SSD1 and SSD3

Amaoe sells three SSD stencils, and each targets a different group of packages. SSD1 (0.2mm) covers BGA96 DDR, BGA136, BGA152, BGA132, BGA272, BGA316 and BGA100, along with controller markings such as AS2258-BN, 2246XT, 2246EN and 2258XT. SSD3 (0.15mm) covers controllers such as IG5669FAA, IG5236CAA and IG5220BAA. The SSD2 BGA reballing stencil stands apart because it adds DDR4 and DDR5 memory, NAND BGA154 and BGA178, and the BGA291 controller package. Read your chip’s package code first, then pick the stencil that lists it. If your bench also handles phone boards, pair it with eMMC programmers, ISP pinout tools and UFS adapters from Mechanicpk, and browse the reballing kits category for phone chip stencils. Pick SSD2 when your queue includes DDR4 or DDR5 memory on SSD boards, or NAND in BGA154 and BGA178. Pick SSD1 or SSD3 when the controller markings above match the drive on your bench. Matching the stencil to the package code saves you a failed reball and a second reflow.

Additional information
Weight0.1 kg
Q & A
Please login to post questions

Key Features

  • 0.25mm stencil thickness
  • Ultra-hard steel construction from Amaoe's Super Hard series
  • Precision-cut square holes for even ball placement
  • Reusable template for repeated jobs
  • DDR4 BGA78 and BGA96 plus DDR5 BGA82 and BGA102 layouts
  • Six NAND layouts: BGA132, BGA152, BGA154, BGA178, BGA272, BGA316
  • 1620 SSD controller layout in BGA291
  • Built for professional IC repair benches

Specifications

BrandAmaoe
ModelSSD:2 (SSD2)
CategoryBGA Reballing Stencil
CompatibilitySSD NAND flash, DDR4/DDR5 memory and SSD controller BGA packages
Supported DevicesSSD NAND, DDR memory and one SSD controller package (package-level, not phone-model specific)
TechnologyBGA stencil reballing, precision-cut square-hole mesh
MaterialUltra-hard steel (Super Hard series)
Thickness0.25mm
Hole TypeSquare
ReusableYes

Common Repair Uses

  • Chip-level reballing on SSD boards
  • Reballing SSD NAND flash chips after removal
  • Reballing DDR4 memory chips from SSD boards
  • Reballing DDR5 memory chips from SSD boards
  • Restoring solder balls on the 1620 SSD BGA291 controller
  • Preparing donor NAND chips before transplanting them onto a repaired board
  • Reworking dead SSD boards with a hardware fault at memory or NAND level
  • Running repeat reballing jobs on a repair bench with one reusable steel template
  • Practicing fine-pitch BGA reballing in technician training sessions

Compatible Devices

  • SSD NAND flash, DDR4/DDR5 memory and SSD controller BGA packages (package-level compatibility, not phone-model specific)
  • DDR4 BGA78 memory chips
  • DDR4 BGA96 memory chips
  • DDR5 BGA82 memory chips
  • DDR5 BGA102 memory chips
  • NAND BGA132 and BGA152 flash chips
  • NAND BGA154 and BGA178 flash chips
  • NAND BGA272 and BGA316 flash chips
  • 1620 SSD controller, BGA291

FAQ

What is the product name?
The product name is Amaoe SSD2 BGA Reballing Stencil.
What is the brand of this product?
The brand of this product is Amaoe.
What is the model of this product?
The model of this product is SSD:2.
What is this product used for?
This product is used for reballing SSD NAND flash, DDR4/DDR5 memory and SSD controller chips with a 0.25mm steel stencil.
Which devices are compatible with this product?
This product is compatible with SSD NAND, DDR memory and controller packages listed in BGA78, BGA82, BGA96, BGA102, BGA132, BGA152, BGA154, BGA178, BGA272, BGA291 and BGA316.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Which NAND packages does the Amaoe SSD2 stencil support?
The SSD2 stencil supports NAND packages BGA132, BGA152, BGA154, BGA178, BGA272 and BGA316.
How thick is the Amaoe SSD2 stencil, and how does it differ from SSD1 and SSD3?
The SSD2 stencil is 0.25mm thick. SSD1 is 0.2mm and covers BGA96 DDR, BGA136, BGA152, BGA132, BGA272, BGA316 and BGA100 along with controller markings such as AS2258-BN and 2246XT. SSD3 is 0.15mm and covers controllers such as IG5669FAA, IG5236CAA and IG5220BAA.