2UUL ST93 Magnetic Screw Pad 140x35mm

₨ 450

2UUL ST93 Magnetic Screw Pad

The 2UUL ST93 is a slim magnetic screw pad for mobile repair benches. It measures 140 x 35 x 2 mm and uses a soft magnetic surface to hold steel screws in place during teardown and reassembly. A partitioned grid layout lets you separate screws by type or repair stage, and the 140 mm length works as a built-in measuring ruler. The compatibility scope is universal, so the pad serves smartphones, tablets, and laptops. Technicians, repair shop owners, and service centers use it to stop screw loss and mix-ups on busy benches. Order the 2UUL ST93 from Mechanicpk for Pakistan-wide delivery.

In stock

19 People watching this product now!
Description

Magnetic Screw Pad for Mobile Repair: 2UUL ST93 Overview

A magnetic screw pad for mobile repair solves the problem every technician meets in the first five minutes of a teardown: small screws roll, bounce, and mix together. The 2UUL ST93 measures 140 x 35 x 2 mm and gives your bench a soft magnetic surface that holds steel screws exactly where you set them. The slim footprint leaves room for your PCB holder, microscope, and soldering station, so you organise fasteners without giving up workspace. 2UUL positions the ST93 as a universal repair accessory, so it serves smartphones, tablets, and laptops instead of tying you to one device family.

Key Technical Highlights

The ST93 uses a soft magnetic material that stays flexible while it keeps a strong adsorption force on screws. That grip matters on a busy bench. When you bump the table or slide a board across it, the screws stay in their section instead of drifting into the next one. The surface follows a clear partitioned grid layout, so you can assign each section to a screw type or a repair stage. The 140 mm length doubles as a measuring ruler. You can check a screw length, a flex cable width, or a bracket size without reaching for a separate scale. At 2 mm thick, the pad sits flat under a phone or board and does not tilt your work. Each unit ships as a single pad.

Repair Workflow Fit

Lay the pad beside your hot air station or soldering station before you open the device. During a battery replacement, screen replacement, or charging port repair, you remove screws in sequence and drop each group into its own section. You then rebuild the phone in reverse order without guessing. Board-level work follows the same pattern. Shield screws, mid-frame screws, and bracket screws stay separated while you chase a hardware fault, so you never push a long screw into a short seat and damage the board. In a workshop where several phones share one bench, a dedicated pad per job keeps parts from different devices apart and cuts reassembly errors. The ST93 pairs with the tools around it: tweezers and screwdrivers on one side, a PCB holder and microscope on the other, and a multimeter within reach for continuity checks. Training institutes get value too. Instructors can label sections by repair stage and teach students to map every screw back to its original position. Counters that handle Samsung, Oppo, Vivo, Infinix, and Tecno jobs in the same shift switch between device types without resetting the bench.

Why Technicians Choose the ST93

You get a compact, low-cost organiser that fits any bench, from a one-person repair counter to a multi-technician service center. The compatibility scope is universal rather than device-specific, so one ST93 covers Android phones, iPhones, tablets, and laptops, which simplifies stocking for shop owners buying in quantity. Keep the working limit in mind: a magnet holds ferromagnetic steel screws, so non-magnetic fasteners will not grip. The slim 2 mm profile also slips into a tool roll or pouch, which suits technicians who carry tools between the shop and customer sites. If you compare screw organisers as a buyer, the specification that matters is simple: 140 x 35 x 2 mm, a soft magnetic surface, a partitioned layout, and a built-in ruler.

Additional information
Weight0.1 kg
Q & A
Please login to post questions

Key Features

  • Soft magnetic surface with strong screw adsorption
  • Flexible material that stays tough in daily use
  • Partitioned grid layout for sorting by screw type or repair stage
  • Dual-use design: magnetic storage plus measuring ruler
  • Compact 140 x 35 x 2 mm size
  • Slim profile that sits flat under phones and boards
  • Universal scope for phones, tablets, and laptops
  • Portable pad that fits a tool roll or pouch

Specifications

Brand2UUL
ModelST93
CategoryMagnetic Screw Pad / Repair Organizer
CompatibilityUniversal, not device-specific
Supported DevicesMobile phones, tablets, laptops, and small electronics
TechnologySoft magnetic adsorption
Dimensions140 x 35 x 2 mm

Common Repair Uses

  • Screw sorting and small-part holding during disassembly and reassembly.
  • Screw storage during battery replacement
  • Screw storage during screen replacement
  • Charging port repair teardown
  • Board-level repair and hardware fault diagnosis
  • Sorting shield, bracket, and mid-frame screws by stage
  • Tablet and laptop service work
  • Quick length checks with the built-in ruler
  • Technician training and repair practice

Compatible Devices

  • Universal scope. The pad is not device-specific and holds steel screws from any device type.
  • Smartphones (Android and iPhone)
  • Tablets
  • Laptops
  • Small electronic devices
  • Steel screws of common repair sizes
  • Small metal parts and brackets

FAQ

What is the product name?
The product name is 2UUL ST93 Magnetic Screw Pad.
What is the brand of this product?
The brand of this product is 2UUL.
What is the model of this product?
The model of this product is ST93.
What is this product used for?
This product is used for holding and organising screws and small metal parts during mobile phone, tablet, and laptop repair.
Which devices are compatible with this product?
This product is universal and not device-specific. It works with phones, tablets, laptops, and small electronics.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
What size is the 2UUL ST93, and can it measure parts?
The 2UUL ST93 measures 140 x 35 x 2 mm. Its 140 mm length works as a measuring ruler for checking screw and part lengths.
Will the 2UUL ST93 hold non-magnetic screws?
No. A magnetic pad holds ferromagnetic steel screws. Non-magnetic fasteners will not grip the surface.