77645-11 PA IC – SKY77645-11 Multiband Power Amplifier

₨ 250

Skyworks 77645-11 PA IC for 3G and 4G Uplink Repair

The 77645-11 PA IC is Skyworks’ SKY77645-11 SkyLiTE multimode multiband power amplifier module for 3G/4G smartphones. It drives uplink across WCDMA, TD-SCDMA, FDD LTE and TDD LTE bands from one 4.0 x 6.8 x 0.75 mm, 42-pad MCM package, with full MIPI control and APT DC-DC optimisation. Technicians replace it when a phone shows a network issue, weak uplink, call drops, or a short on the PA supply rail. Mechanicpk supplies this module for board-level RF repair, so you restore transmit with the exact part the original board design uses.

17 People watching this product now!
Description

77645-11 PA IC: Skyworks SKY77645-11 SkyLiTE Power Amplifier Module

The 77645-11 PA IC is the Skyworks SKY77645-11 SkyLiTE multimode multiband power amplifier module, the transmit stage that drives a smartphone’s 3G and 4G uplink toward the antenna. Skyworks builds it as a 42-pad MCM: an InGaP amplifier die, a CMOS Multi-Function Control die, and matching passives sit together on a multi-layer laminate. The baseband controls band, mode, and bias over MIPI RFFE, so the module reconfigures itself for every network change. When it fails, the phone usually still receives but cannot transmit cleanly, which shows up as a network issue, dropped calls, or a short on the PA supply line. Mechanicpk stocks the 77645-11 PA IC for technicians who trace RF faults down to component level.

Band Coverage and Internal Signal Path

Skyworks rates this SKY77645-11 power amplifier across WCDMA Bands I, II, III, IV, V, VIII and IX, TD-SCDMA Bands 34 and 39, FDD LTE Bands 1, 2, 3, 4, 5, 7, 8, 9, 12, 13, 17, 20, 25, 26, 28 and 30, and TDD LTE Bands 38, 39, 40 and 41. That spread covers low, mid and high band in a single part, which explains why one failed module can kill uplink on several networks at once. The module routes signal through a WCDMA/LTE block for each band group and feeds ten RF outputs plus two T/R receive ports. Skyworks matches the input and output ports internally to 50 ohms, so the board needs fewer external components around the IC. For 4G, it handles channel bandwidths from 1.4 MHz up to 40 MHz, and it supports uplink carrier aggregation on Band 39 up to 35 MHz and Bands 40/41 up to 40 MHz. On the 3G side, it covers WCDMA Release 99 voice, HSDPA, HSUPA, HSPA+, TD-SCDMA and CDMA2000 1x and EVDO modulation.

How the 77645-11 Network IC Behaves on a Live Board

Output power follows the input drive level from the transceiver, while a DC-DC converter adjusts VCC through average power tracking (APT) to keep efficiency high at each power step. Skyworks exposes programmable bias modes over MIPI, letting the platform trade efficiency against linearity for each modulation. The design keeps leakage current extremely low, which protects standby time when the radio sits idle. For your diagnosis, this behaviour matters: a healthy module draws almost nothing at idle and pulls current only during transmit bursts. If your DC power supply shows heavy current the moment you connect power, or the PA VCC rail reads near zero ohms to ground, the amplifier stage has likely shorted. A partially damaged module gives subtler symptoms, such as full signal bars that collapse during calls, emergency-calls-only status, or heat near the RF shield while the phone searches for network.

Replacement Workflow for the 77645-11 PA IC

Confirm the fault before you lift anything. Isolate the PA supply line with a multimeter in diode mode, compare readings against a known-good board, and inspect the shield area under a microscope for corrosion or cracked pads. Always match the exact 77645-11 marking; the SKY77645-21 carries a different band list with CDMA bands, so treat it as a separate part unless the board’s service schematic lists both. Once you confirm the module as the culprit, remove the RF shield, apply quality flux, and lift the old chip with a hot air station using a wide nozzle and even airflow. A PCB holder keeps the board flat, and a preheater reduces stress on the multilayer laminate and neighbouring filters. Clean the pads with solder wick, tin them lightly, align the new module by its pin-1 marker, and reflow until it self-centres. Check every pad under magnification, then refit the shield and test transmit on a live SIM. For shops doing frequent RF board work, a BGA rework station is the logical upgrade path, giving you controlled thermal profiles for multi-pad modules like this one.

Additional information
Weight0.1 kg
Q & A
Please login to post questions

Key Features

  • Skyworks SkyLiTE multimode multiband power amplifier module
  • Covers WCDMA, TD-SCDMA, FDD LTE and TDD LTE in one package
  • Ten RF outputs plus two T/R receive ports
  • Fully programmable MIPI RFFE control with selectable bias modes
  • Optimised for APT DC-DC operation across power levels
  • Internally matched 50-ohm RF ports reduce external components
  • Uplink carrier aggregation support on Bands 39, 40 and 41
  • Compact 4.0 x 6.8 x 0.75 mm, 42-pad MCM footprint

Specifications

BrandSkyworks Solutions
ModelSKY77645-11
CategoryMobile Phone ICs > PA / RF ICs
CompatibilityWCDMA Bands I, II, III, IV, V, VIII, IX; TD-SCDMA Bands 34, 39; FDD LTE Bands 1, 2, 3, 4, 5, 7, 8, 9, 12, 13, 17, 20, 25, 26, 28, 30; TDD LTE Bands 38, 39, 40, 41
Supported Devices3G/4G smartphones whose RF section uses the SKY77645-11 module
TechnologyInGaP amplifier die with CMOS Multi-Function Control, MIPI RFFE control, APT DC-DC optimised
MaterialInGaP and silicon dies on multi-layer laminate substrate
Dimensions4.0 x 6.8 x 0.75 mm, 42-pad MCM, SMT package

Common Repair Uses

  • No service or network issue traced to a failed PA stage
  • Calls dropping when the phone starts transmitting
  • 4G/LTE uplink failure with normal receive signal
  • Dead short on the PA VCC / battery supply line
  • Overheating near the RF shield during network search
  • Water or corrosion damage in the RF section
  • Donor-board PA transfer during board-level repair
  • RF fault training and practice on technical institute benches

Compatible Devices

  • Chipset/band-level scope — fits boards designed around the SKY77645-11; match the 77645-11 marking before replacement
  • 3G/4G smartphones using SKY77645-11 as the main MMMB PA
  • Handsets operating WCDMA Bands I, II, III, IV, V, VIII, IX
  • TD-SCDMA Band 34 and 39 handsets
  • FDD LTE low-band devices (Bands 5, 8, 12, 13, 17, 20, 26, 28)
  • FDD LTE mid/high-band devices (Bands 1, 2, 3, 4, 7, 9, 25, 30)
  • TDD LTE Band 38, 39, 40, 41 devices
  • Platforms using uplink carrier aggregation on Bands 39, 40 and 41
  • MIPI RFFE-controlled RF front-end designs with APT DC-DC supply

FAQ

What is the product name?
The product name is 77645-11 PA IC (Skyworks SKY77645-11 SkyLiTE Multimode Multiband Power Amplifier Module).
What is the brand of this product?
The brand of this product is Skyworks Solutions.
What is the model of this product?
The model of this product is SKY77645-11.
What is this product used for?
This product is used for replacing a faulty 3G/4G transmit power amplifier on smartphone boards to fix network, uplink and PA short faults.
Which devices are compatible with this product?
This product is compatible with 3G/4G smartphones whose RF section uses the SKY77645-11, covering WCDMA, TD-SCDMA, FDD LTE and TDD LTE bands.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Which LTE bands does the 77645-11 PA IC support?
It supports FDD LTE Bands 1, 2, 3, 4, 5, 7, 8, 9, 12, 13, 17, 20, 25, 26, 28 and 30, and TDD LTE Bands 38, 39, 40 and 41.
Can I replace 77645-11 with SKY77645-21?
Skyworks lists the SKY77645-21 with a different band set that adds CDMA bands, so treat it as a separate part and use it only when the board’s service schematic lists it as an approved alternative.