GSM Sources Nano Conductive Silver Paste With Blade

₨ 1

Nano Conductive Silver Paste for LCD Lines

GSM Sources nano conductive silver paste with blade targets one specific fault: broken circuit lines on water-damaged iPhone LCD screens. The silver powder measures under 0.3 microns and the paste carries roughly 80% solid content, so it delivers low resistance and strong adhesion across fine repair lines. It bonds well with ITO film, and it cures with hot air or UV. Use it to fix yellow, green, and white line display problems without replacing the whole screen. Mechanicpk supplies it to repair shops and service centers across Pakistan that handle moisture-affected LCD repairs every week.

Out of stock

13 People watching this product now!
Description

Nano Conductive Silver Paste Built for iPhone LCD Line Repair

Water ingress cuts the fine circuit lines inside an iPhone LCD, and the screen shows yellow, green, or white lines as a display problem. This nano conductive silver paste with blade gives you a way to bridge those broken lines instead of scrapping the screen. GSM Sources formulates the paste with silver powder under 0.3 microns and roughly 80% solid content, so the particles pack tightly and carry current through a thin repair line. Mechanicpk stocks it for technicians who already work at micro-line level and want a consistent conductive material on the bench.

Key Technical Highlights

The silver powder sits at the nano-to-micron level and spreads uniformly through the paste. That uniformity matters when you rebuild a line measured in microns, because uneven particles create high-resistance spots that keep the display faulty. The formula delivers low resistance, excellent electrical conductivity, and high adhesion. It also shows good compatibility with ITO film, so you can use it as an ITO conductive silver paste and as a flexible screen repair circuit silver paste. Screen printing connects the conductive flexible screen patching lines, which lets you reproduce a clean line path across the damaged area. Curing works with hot air or UV, so you pick the method that fits your bench setup.

Repair Workflow Fit

In a hardware fault workflow, you start by inspecting the damaged iPhone LCD under a microscope and locating the broken line ends. You then lay the paste across the gap, cure it, and test the display. The paste ships with a blade, so you start with the application tool on hand. A multimeter confirms line continuity before you reassemble the screen, and a PCB holder keeps the panel steady while you work. If you cure with hot air, a hot air station gives you controlled heat, and your microscope keeps the line width under control. Pairing this paste with those tools turns a hit-or-miss repair into a repeatable process.

Why Technicians Choose This Paste

A full screen swap costs you a part and margin. Repairing the existing LCD keeps the original panel in play and shortens the job for customers who bring in a water-damaged iPhone with line faults. Yellow screen, green screen, and white screen complaints arrive constantly at repair counters, and this paste targets exactly those three symptoms. The spec-driven formulation gives you predictable behavior: sub-0.3 micron silver, high solid content, and adhesion that holds on ITO film. You buy a single-purpose repair material, and you know its job on your bench.

Mechanicpk supplies this paste for shop owners, service centers, and technicians who want a dedicated LCD line repair material rather than a general-purpose conductive glue. Add related tools such as microscopes, multimeters, hot air stations, and PCB holders from the Mechanicpk catalog to complete your display repair setup.

Additional information
Weight0.1 kg
Q & A
Please login to post questions

Key Features

  • Nano-to-micron silver powder with uniform distribution
  • Silver particle size under 0.3 microns
  • Solid content of approximately 80%
  • Low resistance and excellent electrical conductivity
  • High adhesion on the repair surface
  • Good compatibility with ITO film
  • Hot air or UV curing
  • Supplied with a blade

Specifications

BrandGSM Sources
CategoryConductive Silver Paste / LCD Repair Paste
CompatibilityiPhone LCD screens with water-damage line faults
Supported DevicesiPhone LCD displays
TechnologyNano conductive silver paste, silver powder particle size under 0.3 microns, approximately 80% solid content, hot air / UV curing
MaterialSilver powder-based conductive paste

Common Repair Uses

  • Repairing broken micro-lines on water-damaged iPhone LCD screens
  • iPhone LCD yellow line repair
  • iPhone LCD green line repair
  • iPhone LCD white line repair
  • Restoring micro-line damage caused by water ingress
  • Connecting conductive lines on ITO film
  • Patching flexible screen repair circuits
  • Screen printing conductive flexible screen patching lines

Compatible Devices

  • iPhone LCD screens with water-damage line faults (verified scope: iPhone LCD display line repair; no other brand or model list is confirmed)
  • iPhone LCD screens with yellow line faults
  • iPhone LCD screens with green line faults
  • iPhone LCD screens with white line faults
  • Water-damaged iPhone LCD circuits
  • ITO film circuits on LCD screens
  • Flexible screen patching lines

FAQ

What is the product name?
The product name is GSM Sources Nano Conductive Silver Paste With Blade.
What is the brand of this product?
The brand of this product is GSM Sources.
What is this product used for?
This product is used for repairing broken circuit lines on water-damaged iPhone LCD screens.
Which devices are compatible with this product?
This product is compatible with iPhone LCD screens that show water-damage line faults.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Can this silver paste fix yellow, green, and white lines on an iPhone screen?
Yes. The paste is designed to repair yellow screen, green screen, and white screen lines caused by water damage on iPhone LCD screens.
How does this nano conductive silver paste cure, and what is its particle size?
The paste cures with hot air or UV. The silver powder particle size is under 0.3 microns and the solid content is approximately 80%.