JCID X-15PM Face ID Adaptor for V1SE & V1S Pro
₨ 6,500
JCID X-15PM Face ID Adaptor
The JCID X-15PM adaptor connects your V1SE or V1S Pro programmer to the Face ID dot projector circuit on iPhone X through iPhone 15 Pro Max. You activate the original Face ID module, read its dot projector data, and write that data to a non-removal tag-on repair flex without external power. The board targets the “Move iPhone higher or lower” fault and other Face ID hardware faults that stop a phone from enrolling or unlocking. Repair shops that handle iPhone motherboards get a compact, programmer-driven path to restore Face ID without dismantling the optical prism.
In stock
JCID X-15PM Face ID Adaptor for iPhone X to 15 Pro Max
The JCID X-15PM Face ID adaptor gives your V1SE or V1S Pro programmer direct access to the dot projector circuit inside the True Depth camera system. You activate the original Face ID module, read its stored data, and write that data to a non-removal tag-on repair flex, all through one board that runs without an external power supply. In Pakistan’s iPhone repair market, this adaptor answers a specific and common job: a phone arrives with Face ID not working after a drop, a screen swap, or a failed dot projector, and the customer wants the original Face ID back instead of a passcode-only phone.
Technical Capability and Programmer Pairing
JCID positions the X-15PM for the V1SE and V1S Pro programmers, so confirm your host unit before you order. The board covers three operations on the dot projector: activation, data read, and data write. Because the adaptor needs no external power supply, you plug it into the programmer, connect the phone’s Face ID connection, and work without extra cables crowding your bench.
The board supports the iPhone range from X to 15 Pro Max. That coverage matters for a workshop that sees mixed generations in one day, since a single adaptor handles the older Face ID flex layouts and the newer ones. You read the original dot projector data first, keep it safe, and then decide whether the module needs activation or a data transfer to a new flex.
Tag-On Flex Workflow Without Soldering
The X-15PM pairs with JCID’s non-removal Face ID repair FPC. This tag-on flex removes the need to dismantle or reinstall the optical prism, and it removes chip soldering and alignment from the job. You read the original Face ID data with the programmer, write it into the tag-on cable, and the phone accepts the repaired Face ID path. Technicians with limited micro-soldering experience benefit most, because the process replaces precise board-level work with a programmer routine.
Check the cable-to-adaptor pairing for your iPhone generation before you start, since JCID publishes separate guidance for the 13 to 15 Pro Max tag-on cables. Each tag-on cable accepts a maximum of five data writes. One write usually completes the repair, so plan each job before you commit data to the cable.
Where It Fits on Your Repair Bench
Start every Face ID job with diagnosis. Use a multimeter to check the front flex lines and a microscope to inspect the connector and the dot projector flex for damage. Secure the logic board in a PCB holder, then connect the adaptor and run the read operation on your programmer. When the fault sits deeper in the board, your hot air station and soldering station still handle the hardware work, and the X-15PM covers the data side of the repair.
This adaptor belongs beside your other JCID accessories: battery boards, True Tone boards, and receiver FPC detection boards. Together they let one programmer cover Face ID, True Tone, battery, and proximity faults on the same iPhone motherboard. Browse the Mechanicpk programmers and iPhone repair adaptor categories to build the full V1SE or V1S Pro kit for your workshop.
| Weight | 0.5 kg |
|---|
Key Features
- ✓Activates the original Face ID module on iPhone X to 15 Pro Max
- ✓Reads and writes dot projector data through the programmer
- ✓Runs without an external power supply
- ✓Works with JCID V1SE and V1S Pro programmers
- ✓Pairs with JCID non-removal tag-on Face ID repair FPC
- ✓Removes soldering and alignment from the Face ID repair
- ✓Avoids dismantling the optical prism
- ✓Covers multiple iPhone generations with one adaptor
Specifications
| Brand | JCID |
|---|---|
| Model | X-15PM |
| Category | iPhone Face ID Repair Adaptor |
| Compatibility | JCID V1SE and V1S Pro programmers |
| Supported Devices | iPhone X to iPhone 15 Pro Max |
| Technology | Face ID dot projector activation, data read and data write, no external power supply |
Common Repair Uses
- ✓Face ID dot projector repair and activation on iPhone motherboards
- ✓Activating the original Face ID module
- ✓Reading dot projector data from the phone
- ✓Writing Face ID data to a non-removal tag-on repair flex
- ✓Fixing the “Move iPhone higher or lower” Face ID fault
- ✓Restoring Face ID after dot projector damage
- ✓Repairing Face ID without dismantling the optical prism
- ✓Backing up dot projector data before a repair
- ✓Detecting a faulty dot projector flex during diagnosis
Compatible Devices
- ✓iPhone X to iPhone 15 Pro Max, used with JCID V1SE or V1S Pro programmer
- ✓iPhone X
- ✓iPhone XR
- ✓iPhone XS and XS Max
- ✓iPhone 11, 11 Pro and 11 Pro Max
- ✓iPhone 12 series
- ✓iPhone 13 series
- ✓iPhone 14 series
- ✓iPhone 15 series including 15 Pro Max
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Which JCID programmers work with the X-15PM Face ID adaptor?
How many times can I write data to a JCID tag-on Face ID cable?
Related products
JZQ-599B Soldering Iron Tip Cleaner with Tin Cleaning Ball
Out of stock
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock



