Mechanic 900M-T-TI Lead-Free Solder Tip for 936 Stations

₨ 1

900M-T-TI Lead-Free Soldering Tip

The Mechanic 900M-T-TI soldering tip gives your 936-class station a lead-free replacement tip with a red copper substrate and iron and nickel plating. It fits 936, 937, 938, 969, 8586 and 852D stations, works across a 200–480°C range, and covers the daily jobs on a phone motherboard: desoldering, drag soldering, glue removal, pad cleaning and reflow. Check that your iron uses the 900M-T interface before you order, because 900M-T series tips do not fit 908 or 900S-type irons. Add it to your repair bench and keep a spare for busy weeks.

Out of stock

15 People watching this product now!
Description

900M-T-TI Soldering Tip for Lead-Free Board Repair

The Mechanic 900M-T-TI soldering tip belongs to the 900M-T lead-free series that fits the 936-class stations on most Pakistani repair benches. It combines a red copper substrate with iron and nickel plating, so heat reaches the pad quickly and the tip resists oxidation between jobs. If you work with lead-free alloy on phone motherboards, this tip keeps your station matched to that workflow. You swap it into your existing handle, set your temperature and return to the board without changing your setup.

Heat Transfer and Plating Construction

Red copper moves heat from the heating element to the contact surface fast, and that speed decides how long a joint stays under heat. The iron plating protects the copper from erosion, and the nickel layer adds corrosion resistance. Lead-free alloys run hotter and attack bare copper quickly, so a plated tip lasts longer on a busy bench. The tip suits stations that operate between 200°C and 480°C, which covers routine soldering and rework on mobile PCBs. The 4mm inner bore slides over the heating element of a 900M-T handle. Keep the tip tinned between joints, because a dry tip oxidises and stops transferring heat.

Repair Workflow Fit for the 900M-T-TI Soldering Tip

Mechanic sells its Master Series tips for motherboard repair: desoldering, drag soldering, glue removal, pad cleaning and reflowing. On a dead phone that needs jumper lagana after a burnt track, you tin the wire end, lay the jumper and flow the joint with this tip. On a charging issue or other hardware fault, you clean the leftover solder from the pads after an IC change, re-tin them and place the next component. Pair the tip with a hot air station for lifting ICs, a microscope for checking joints and a PCB holder that keeps the board steady under your hand.

Why Technicians Stay With the 900M-T Interface

The 900M-T standard is common, so you find spare tips and matching stations easily. When you move between tip styles, you keep the same handle, controller and temperature setting. Shops that run several benches stock one tip family and swap tips between jobs instead of buying a new iron. After you solder, check continuity with a multimeter before you power the board. When a repair calls for BGA work, move to your reballing kit and hot air station, and use this tip for the pads, jumpers and small components around the chip.

Check Your Handle Before You Order

Confirm that your iron accepts 900M-T tips. This tip family fits 936, 937, 938, 969, 8586 and 852D stations, and it does not fit 908 or 900S-type irons. Buy at least one spare, since a tip that sees daily lead-free work wears out sooner than the iron that holds it. Store spares dry, and clean the tip on a brass sponge or wet sponge according to your station’s guidance.

Additional information
Weight0.1 kg
Q & A
Please login to post questions

Key Features

  • Lead-free 900M-T series construction
  • Red copper substrate for fast heat transfer
  • Iron plating that protects the copper
  • Nickel layer for corrosion resistance
  • 200–480°C working range
  • 4mm inner diameter for 900M-T handles
  • Fits 936, 937, 938, 969, 8586 and 852D stations
  • Suited to motherboard desoldering, drag soldering and pad cleaning

Specifications

BrandMechanic
Model900M-T-TI
CategorySoldering Iron Tip
Compatibility936, 937, 938, 969, 8586 and 852D soldering stations
TechnologyLead-free 900M-T series, Master Series
MaterialRed copper substrate with iron and nickel plating
Temperature Range200–480°C
Inner Diameter4mm

Common Repair Uses

  • Board-level soldering and desoldering on mobile phone motherboards
  • Desoldering components
  • Drag soldering
  • Removing glue from boards
  • Cleaning pads after IC removal
  • Reflowing small joints
  • Jumper wire soldering on burnt tracks
  • Tinning pads and wire ends
  • General motherboard maintenance on a repair bench

Compatible Devices

  • 900M-T-interface soldering stations (station compatibility, not phone-specific)
  • Hakko-style 936 soldering station
  • 937 soldering station
  • 938 soldering station
  • 969 soldering station
  • 8586 rework station
  • 852D rework station
  • 907 soldering station
  • Other 900M-T-interface stations from brands such as Quick, Aoyue, Yihua and Atten

FAQ

What is the product name?
The product name is Mechanic 900M-T-TI Lead-Free Solder Tip.
What is the brand of this product?
The brand of this product is Mechanic.
What is the model of this product?
The model of this product is 900M-T-TI.
What is this product used for?
This product is used for lead-free soldering, desoldering, drag soldering, glue removal, pad cleaning and reflowing on mobile phone motherboards.
Which devices are compatible with this product?
This product is compatible with 936, 937, 938, 969, 8586 and 852D soldering stations that use the 900M-T interface.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Which soldering stations accept the 900M-T-TI tip, and which irons does it not fit?
The tip fits 936, 937, 938, 969, 8586 and 852D stations that use the 900M-T interface. 900M-T series tips do not fit 908 or 900S-type irons, so confirm your handle before you order.
What temperature range does the 900M-T-TI tip support?
The tip works within a 200–480°C range, which matches the operating range of the stations it fits.