PM7325 000 Power IC – Qualcomm PMIC for Snapdragon 778G
₨ 600
PM7325 000 Power IC for SM7325 Board Repair
The PM7325 000 Power IC is the Qualcomm power management chip that feeds core supply rails on SM7325-based smartphones, the platform behind the Snapdragon 778G and 778G+. When this PMIC fails, the phone usually shows a dead phone condition, abnormal current draw, or a hang on logo fault that no software flash can fix. Mechanicpk supplies this BGA PMIC for board-level technicians who handle Qualcomm power-section diagnosis and IC replacement. Match the 000 suffix with the marking on your original chip, prepare the board with a hot air station and reballing stencil, and restore normal power-up on supported Snapdragon 778G devices.
PM7325 000 Power IC: Main PMIC for Qualcomm SM7325 Boards
The PM7325 000 Power IC sits at the center of the power section on phones built around the Qualcomm SM7325 platform. This PM7325 power IC generates and sequences the supply rails that the application processor, memory, and core peripherals need during power-up. A failed PMIC leaves the board unable to complete its startup sequence, so the phone either draws no current, pulls a short, or stalls before reaching the operating system. For technicians working on Snapdragon 778G and 778G+ hardware, this chip ranks among the most common board-level replacement parts in the power section.
Where the PM7325 Power IC Sits in the SM7325 Power Tree
Qualcomm splits power management across several chips on this platform. The PM7325 works alongside companion PMICs such as the PM8350C, PMK8350, and PMR735A, communicating with the processor over the SPMI bus. Each chip handles its own set of regulators, so a fault on one PMIC produces a different symptom pattern than a fault on another. Understanding this split helps you avoid replacing the wrong chip. If you trace a missing rail back to the PM7325 output section, you have a strong case for replacement. If the rail originates from a companion PMIC, the PM7325 likely stays healthy.
Diagnosing PM7325 Faults Before Replacement
Start every power-section job on a DC power supply. A dead phone that shows zero current when you press the power key often points to a missing trigger path or a failed PMIC. A board that pulls high current immediately suggests a shorted rail, and you can locate the hot component with freeze spray, rosin smoke, or a thermal camera. A heated PM7325 confirms an internal short. Boot loop and hang on logo complaints need more care, since software corruption and memory faults produce the same symptoms. Flash the firmware first; if the board still fails, measure the PMIC output rails with a quality multimeter against a known-good reference board.
Replacement Workflow on Your Repair Bench
Mount the board in a PCB holder and inspect the PMIC area under a stereo microscope before applying any heat. Most SM7325 boards carry underfill around major BGA chips, so soften and remove it carefully to avoid lifting pads. Use a hot air station with controlled airflow, shield nearby components with heat-resistant tape, and lift the old chip once the solder fully melts. Clean the pads with flux and desoldering wick using a soldering station, then check every pad under the microscope. If your replacement PM7325 arrives without solder balls, reball it with a matching stencil from a reballing kit. Align the chip using the corner marking, reflow, let the board cool naturally, then check rails and current draw before you reassemble the phone.
Snapdragon 778G PMIC Compatibility Scope
This Snapdragon 778G PMIC targets phones built on SM7325, including the 778G+ variant (SM7325-AE). That covers popular models from Samsung, Xiaomi, Honor, Realme, Motorola, and Nothing. Always compare the full marking on the original chip, including the suffix, before you order. Qualcomm uses suffix codes such as 000 to separate part revisions, and matching the original suffix keeps you on the safe side.
Buying Notes for Repair Shops and Service Centers
A board-level PMIC job only succeeds with the right supporting equipment. Pair the PM7325 power IC with a reliable hot air station, a fine-tip soldering station, a reballing kit with the correct stencil, and a microscope that lets you inspect pad condition clearly. Service centers that see regular Snapdragon 778G traffic benefit from keeping this SM7325 power management IC in stock, since power-section faults on this platform arrive steadily after liquid damage, charging accidents, and drop impacts. Browse our Hot Air Stations, Reballing Kits, PCB Holders, Microscopes, and Multimeters categories to complete your power-section repair setup.
| Weight | 0.1 kg |
|---|
Key Features
- ✓Qualcomm PMIC designed for the SM7325 platform power tree
- ✓Supplies core rails required for processor and memory startup
- ✓Communicates with the processor over the SPMI bus
- ✓Works alongside PM8350C, PMK8350, and PMR735A companion PMICs
- ✓BGA package suited to standard hot air and reballing workflows
- ✓000 suffix marking for accurate part matching on the board
- ✓Covers Snapdragon 778G and 778G+ phones from several major brands
- ✓Targeted fix for dead phone and shorted-rail faults in the power section
Specifications
| Brand | Qualcomm |
|---|---|
| Model | PM7325 000 |
| Category | Mobile Phone ICs – Power Management IC (PMIC) |
| Compatibility | Qualcomm SM7325 platform (Snapdragon 778G / 778G+) |
| Technology | Multi-rail PMIC with SPMI interface, works alongside PM8350C, PMK8350, and PMR735A |
| Package | BGA |
Common Repair Uses
- ✓Dead phone with zero current draw on the DC power supply
- ✓Shorted power rail traced to a heated PMIC
- ✓Hang on logo after confirming firmware is healthy
- ✓Boot loop caused by unstable supply rails
- ✓Liquid-damaged power section restoration
- ✓Board recovery after a faulty charger or voltage spike
- ✓PMIC replacement during full power-section rework
- ✓Donor-board salvage and refurbishment work
Compatible Devices
- ✓Phones built on the Qualcomm SM7325 platform (Snapdragon 778G / 778G+) — match the PMIC marking on the board before ordering
- ✓Honor 50
- ✓Samsung Galaxy A52s 5G
- ✓Samsung Galaxy A73 5G
- ✓Samsung Galaxy M52 5G
- ✓Xiaomi 11 Lite 5G NE
- ✓Nothing Phone (1)
- ✓Realme GT Master Edition
- ✓Motorola Edge 30
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Does the PM7325 power IC work on Snapdragon 778G+ phones?
Can a faulty PM7325 cause a dead phone with no current draw?
Related products
339S0223 For iPad 5/Air1 A1474 Wifi IC – U5800 WiFi Module
In stock
343S0694 Touch IC U2402 iPhone 6 and 6 Plus Touch Black IC
In stock



