Qianli Bumblebee Stencil (QS82) For Samsung Galaxy 12

₨ 799

QS82 BGA Reballing Stencil for Samsung S20 5G

The Qianli Bumblebee Stencil (QS82) For Samsung Galaxy 12 gives your bench a Bumblebee-series BGA reballing stencil for the Galaxy S20 5G family, covering the S20 Plus 5G, S20 Ultra 5G and S20 FE 5G. Square holes with rounded angles guide solder balls onto a cleaned CPU pad array, so you rebuild joints evenly after you lift a chip. Reseller listings tie it to Snapdragon 865 and Exynos 990 boards. Pair it with a hot air station, reballing kit and microscope to handle a dead phone, boot loop issue or hang on logo fault that traces back to weak BGA joints.

In stock

16 People watching this product now!
Description

Qianli Bumblebee Stencil (QS82) For Samsung Galaxy 12: Square-Hole BGA Reballing for the S20 5G Series

The Qianli Bumblebee Stencil (QS82) For Samsung Galaxy 12 is a device-specific BGA reballing stencil for the Galaxy S20 5G board family. Distributor listings place the Qianli Bumblebee stencil QS82 against the S20 5G, S20 Plus 5G, S20 Ultra 5G and S20 FE 5G, so a single stencil covers the four variants that reach a Samsung repair bench most often. The square holes with rounded angles let solder balls seat and release cleanly when you rebuild a lifted CPU. If your shop services Snapdragon 865 and Exynos 990 boards, QS82 belongs next to your reballing platform.

Technical Highlights of the QS82 Bumblebee Layout

Qianli sells QS82 inside its Bumblebee range, a family of ready-cut stencils that follow the pad layout of a specific phone platform instead of a universal grid. That distinction matters at the bench. A universal multi-pitch stencil forces you to align by eye and hope the pitch matches. A platform stencil like QS82 maps to the S20 5G CPU footprint, so alignment becomes a matter of lining up the pad array and holding the stencil steady.

The hole geometry is the main technical feature. Square openings with rounded corners give each solder ball a defined seat, and the corner radius helps the ball drop through and release during heating. Reseller listings tie QS82 to the Qualcomm Snapdragon 865 (SM8250) and Samsung Exynos 990 platforms, which matches the S20 5G generation it targets. Qianli also describes a refreshed surface treatment and new materials on its current Bumblebee run, aimed at easier handling and cleaner results.

Where QS82 Fits in a Samsung S20 Reballing Workflow

You reach for this stencil after the diagnosis stage. A dead phone, a boot loop issue or a hang on logo fault often traces back to a CPU whose BGA joints lost contact, and the repair path runs through chip removal, pad cleaning and reballing. QS82 handles the reballing step. Once you lift the chip with a hot air station and clean the pads with flux and wick from your soldering station, you place the stencil over the CPU, sweep in solder balls or paste, and reflow them into a fresh, even array.

Good magnification pays off here. A stereo microscope lets you confirm every opening holds a ball before you reflow, and a PCB holder keeps the board still while you work. After reballing, you refit the chip, then verify with a multimeter on the power rails and a test box or flashing tool before you close the phone. That sequence keeps PCB repair predictable on a board where a mistake on one pad costs you the whole job.

QS82 also supports IC-level jobs around the CPU zone on the same Samsung boards, since the stencil comes from a series built for board-level rework on this phone generation. Always confirm the footprint of the part you are rebuilding against the stencil before you commit solder.

Choosing QS82 for Your Repair Bench

Pick QS82 when your workload includes Galaxy S20 5G family boards and you want repeatable results on CPU reballing without cutting your own template. One model number covers the S20 5G, S20 Plus 5G, S20 Ultra 5G and S20 FE 5G, which keeps your stencil drawer simple and your reorder list short for a service center that sees mixed Samsung flagships.

The product name carries the label “Samsung Galaxy 12” in some distributor catalogs. That label refers to the same QS82 stencil that other sellers list for the Galaxy S20 5G series, so check the compatibility line on this page against the board in front of you before you order. Technicians who also stock the Qianli Bumblebee range for Huawei, Qualcomm and MediaTek platforms can keep one consistent workflow across brands.

For a complete reballing setup, add a reballing kit, a hot air station, a soldering station, flux, a microscope and a PCB holder to your order. Browse the matching categories on Mechanicpk to build the full bench around QS82.

Additional information
Weight0.1 kg
Q & A
Please login to post questions

Key Features

  • Square holes with rounded angles for clean ball seating and release
  • Qianli Bumblebee-series stencil built around a specific phone platform
  • One model number for the Galaxy S20 5G, S20 Plus 5G, S20 Ultra 5G and S20 FE 5G
  • Targets CPU BGA reballing on Samsung S20 5G generation boards
  • Listed against Snapdragon 865 (SM8250) and Exynos 990 platforms
  • Refreshed surface treatment and materials on Qianli's current Bumblebee run, per Qianli listings
  • Suits chip-off reballing after hot air removal
  • Fits a standard bench setup with reballing platform, microscope and PCB holder

Specifications

Brand EntityQianli (ToolPlus Bumblebee series)
Product EntityQianli Bumblebee Stencil QS82
Technology EntitySquare-hole, rounded-angle BGA reballing stencil
Compatible Device EntitiesSamsung Galaxy S20 5G, S20 Plus 5G, S20 Ultra 5G, S20 FE 5G; Snapdragon 865 (SM8250); Exynos 990
Repair Process EntityCPU/BGA reballing, board-level PCB repair
Industry EntityMobile phone repair, GSM hardware repair

Common Repair Uses

  • CPU reballing after chip removal on Galaxy S20 5G series boards
  • Rebuilding solder ball arrays on a lifted BGA chip
  • Repairing a dead phone caused by weak BGA joints
  • Fixing a boot loop issue or hang on logo fault linked to CPU solder contact
  • Re-seating a CPU after pad cleaning and reflow
  • Board-level PCB repair on Samsung flagship motherboards
  • Workshop reballing jobs for mixed S20 5G variants
  • Training bench practice on BGA rework

Compatible Devices

  • Samsung Galaxy S20 5G family (verified model scope)
  • Samsung Galaxy S20 5G
  • Samsung Galaxy S20 Plus 5G
  • Samsung Galaxy S20 Ultra 5G (SM-G988U / SM-G988B)
  • Samsung Galaxy S20 FE 5G
  • Qualcomm Snapdragon 865 (SM8250) boards
  • Samsung Exynos 990 boards

FAQ

What is the product name?
The product name is Qianli Bumblebee Stencil (QS82) For Samsung Galaxy 12.
What is the brand of this product?
The brand of this product is Qianli.
What is the model of this product?
The model of this product is QS82.
What is this product used for?
This product is used for BGA reballing on Samsung Galaxy S20 5G series boards.
Which devices are compatible with this product?
This product is compatible with the Samsung Galaxy S20 5G, S20 Plus 5G, S20 Ultra 5G and S20 FE 5G.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Is Samsung Galaxy 12 the same as the Galaxy S20 series for the QS82 stencil?
Yes. Some distributor catalogs label QS82 as "Samsung Galaxy 12," and other sellers list the same QS82 model for the Galaxy S20 5G, S20 Plus 5G, S20 Ultra 5G and S20 FE 5G.
What hole shape does the QS82 stencil use, and which CPU platforms does it target?
QS82 uses square holes with rounded angles, and reseller listings tie it to the Qualcomm Snapdragon 865 (SM8250) and Samsung Exynos 990 platforms.