Relife TB2 Needle-Tube Solvent Bottle for Mobile Repair
₨ 150
Relife TB2 Needle-Tube Solvent Bottle
The Relife TB2 solvent bottle for mobile repair gives you controlled dispensing for alcohol, frame removal fluid and glue removal liquid. Relife built it as a needle-tube bottle with a threaded mouth and a plug-and-play needle, so you place liquid on a pad, connector or screen frame without flooding the board. The sealed, corrosion-resistant design resists side leakage on a busy bench. Use it for flux cleanup after IC change karna, charging port area cleaning, screen frame separation and old adhesive removal. Technicians, repair shops and service centers across Pakistan add it to their cleaning and rework setup because it keeps solvent exactly where the repair needs it.
In stock
Relife TB2 Solvent Bottle for Mobile Repair: Controlled Liquid Dispensing at Your Bench
The Relife TB2 solvent bottle for mobile repair puts alcohol, frame removal fluid or glue remover exactly where your board needs it and nowhere else. Relife built the TB2 as a needle-tube dispenser, so you squeeze a thin, controlled line of liquid instead of splashing it from an open bottle. For repair shops across Pakistan that clean dozens of boards every week, that control saves solvent, protects nearby components and keeps your bench tidy. Mechanicpk stocks the TB2 in its repair accessories range, next to the soldering and rework equipment you already use.
How the Needle-Tube Design Works
The TB2 pairs a plastic bottle body with a threaded mouth and a plug-and-play needle. You screw the needle assembly on, squeeze gently, and the liquid leaves through a fine tip instead of pouring. Relife lists strong sealing, anti-corrosion construction and anti-side leakage for this model, which matters when the bottle sits beside a hot air station or a PCB holder for a full shift. The narrow needle makes dosage easy to control, so you place a single drop on a connector or run a thin line along a screen frame without flooding the area. Squeeze pressure sets the flow, so practice on a scrap board before your first live repair. You fill the bottle with the solvent you already use: alcohol, frame removal fluid or glue removal liquid.
Where the TB2 Fits in Your Repair Workflow
Every clean board that leaves your bench starts with a controlled wash. After IC change karna, flux residue sits around the pads. A few drops of alcohol from the TB2 let you scrub that area with a brush under your microscope without soaking the whole board. On a dead phone that arrives with a charging issue, you clean the charging port area and surrounding pads before you test with a multimeter, because residue can hide a poor joint. Boards that come in after liquid damage need the same careful cleaning before you diagnose a hang on logo or network issue.
Screen jobs use the same bottle. A thin line of frame removal fluid works along the frame edge during separation, and glue removal solution clears old adhesive from the frame before you fit the new display. When you chase a display problem after a repair, clean contacts and a clean frame are the first things you check.
Why Technicians Keep One Bottle Per Liquid
Mixing liquids in one bottle spoils both. The TB2 is compact and affordable enough that you can label one bottle for alcohol, one for frame removal fluid and one for glue remover, then grab the right one without thinking. The needle tip sits close to the work, so you keep solvent off flex cables, plastic connectors and screen edges that react badly to the wrong chemical. Strong sealing also helps in a workshop where bottles get knocked over. Service centers that run several technicians on shared benches give each person a labeled dispenser and cut cross-contamination.
The TB2 works best as part of a complete bench. Pair it with Soldering Stations and Hot Air Stations for the rework itself, Reballing Kits and PCB Holders for BGA jobs, Microscopes for inspecting the result, and Multimeters and Test Boxes for checking the board once it is clean. As a low-cost accessory, the Relife TB2 solvent bottle slots into any order at Mechanicpk and upgrades the cleaning step of every repair you finish.
| Weight | 0.3 kg |
|---|
Key Features
- ✓Needle-tube design for precise liquid placement
- ✓Threaded bottle mouth for a secure closure and easy refilling
- ✓Plug-and-play needle system
- ✓Strong sealing for storage between jobs
- ✓Anti-corrosion construction
- ✓Anti-side leakage design
- ✓Easy dosage control for small amounts of liquid
- ✓Chemical-resistant plastic body
Specifications
| Brand | Relife |
|---|---|
| Model | TB2 |
| Category | Repair Accessories / Solvent Dispenser Bottles |
| Compatibility | Universal, not device-specific |
| Technology | Needle-tube dispensing with threaded mouth and plug-and-play needle |
| Material | Chemical-resistant plastic |
Common Repair Uses
- ✓Cleaning and dispensing tasks across board-level and screen repair.
- ✓Flux residue cleanup after IC change karna
- ✓Board cleaning before inspection under a microscope
- ✓Charging port area and pad cleaning
- ✓Cleaning boards after liquid damage
- ✓Applying frame removal fluid during screen frame separation
- ✓Removing old adhesive from frames with glue removal solution
- ✓Spot cleaning of connectors and contacts
Compatible Devices
- ✓Universal. The TB2 is a liquid dispenser, so it works on phone boards and frames of any brand and is not tied to a specific model or chipset.
- ✓Phone boards of any brand (Samsung, Oppo, Vivo, Infinix, Tecno, iPhone) as a general cleaning tool
- ✓Alcohol for board cleaning
- ✓Frame removal fluid
- ✓Glue removal solutions
- ✓Other solvents used in mobile repair
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Which liquids can I use in the Relife TB2 solvent bottle?
Does the Relife TB2 have a needle for precise application?
Related products
RELIFE RL-004SA silicone pad – Anti-slip
In stock



