Relife RL-601Q Tempered Insulated Glass Fixtures
₨ 1
Tempered Glass PCB Fixture for Board Repair
The Relife RL-601Q Tempered Insulated Glass Fixtures give your bench a tempered glass PCB fixture built for motherboards, CPUs, and precision ICs. The insulating glass panel and synthetic stone clamps resist temperatures above 500°C without deforming, so the surface stays flat through repeated hot air rework. Inward-angled bevels and smooth bidirectional screw adjustment lock single-layer and double-layer boards in place. The corrosion-resistant glass wipes clean after flux and solvent. Compact and light, the fixture sits beside your microscope or hot air station without crowding the bench.
Out of stock
Tempered Glass PCB Fixture for Motherboard and IC Rework
The Relife RL-601Q Tempered Insulated Glass Fixtures work as a tempered glass PCB fixture that holds a board still while you repair it. Phone boards flex, slide, and pull heat into whatever sits underneath. Each of those problems costs you time on a dead phone with a hardware fault. The RL-601Q answers all three with an insulating glass base, heat-resistant synthetic stone clamps, and a bidirectional screw mechanism. You position the board once, clamp it, and start the repair instead of steadying the board with one hand and the hot air gun with the other. Mechanicpk stocks the RL-601Q for Pakistani repair shops that need a dependable board hold at the bench.
Heat Insulation and Material Construction
Heat decides how long a fixture lasts. The RL-601Q pairs tempered insulating glass with synthetic stone clamps, and Relife specifies both materials as resistant to temperatures exceeding 500°C without deformation. That margin matters during hot air rework, IC removal, and chip debonding, where the board and the air around it heat up fast. Glass does not warp, so the work surface stays level across many heat cycles. Relife also lists the materials as anti-static and corrosion resistant, which suits a bench where flux residue and cleaning fluids build up. A quick wipe clears the transparent panel, and the clear surface lets you check board position and flux spread from above. Keep the glass away from impact and direct flame contact. Tempered glass tolerates heat well but still needs careful handling.
Bevel Clamping and Bidirectional Adjustment
The clamps carry an inward-angled bevel. As you tighten the screws, the bevel presses the board edge down and inward, so the board seats against the glass instead of lifting. Bidirectional screw adjustment opens and closes the clamps smoothly to match the board width, and the design prevents the board from dropping out. The fixture accepts single-layer and double-layer motherboards, chips, CPUs, hard drives, and other ICs, which covers most of what lands on a phone repair bench. For a boot loop issue or a charging issue that needs an IC change, you clamp the board once and work through the power and storage areas without re-gripping. Compact dimensions and low weight keep the fixture portable, so you can move it to a second bench or a training session.
Where the RL-601Q Fits in Your Repair Workflow
Place the RL-601Q at the start of board-level work. Before you reach for the soldering station, hot air station, or reballing kit, the board needs a stable, heat-safe hold, and this fixture provides it. Pair it with a microscope for inspection and fine pad work, and with a multimeter and test box when you diagnose power faults. During ISP pinout work on eMMC or UFS repair jobs, a held board frees both hands for adapters, wires, and probes. If you move up from basic PCB holders, you gain a better thermal profile and a wider chip range. If you later need rotation under a microscope, Relife also makes the RL-601Q Pro with a 360° damped base. Browse the PCB Holders, Hot Air Stations, Soldering Stations, Microscopes, Reballing Kits, Multimeters, and Test Boxes categories at Mechanicpk to build the full bench around it.
| Weight | 0.15 kg |
|---|
Key Features
- ✓Tempered insulating glass base that resists temperatures exceeding 500°C
- ✓Heat-resistant synthetic stone clamps that keep their shape
- ✓Inward-angled bevel that seats the board downward
- ✓Smooth bidirectional screw adjustment with no-drop clamping
- ✓Holds single-layer and double-layer motherboards
- ✓Accepts chips, CPUs, hard drives, and other ICs
- ✓Anti-static and corrosion-resistant materials
- ✓Compact, lightweight body with an easy-clean glass panel
Specifications
| Brand | Relife |
|---|---|
| Model | RL-601Q |
| Category | PCB Holders / Motherboard Repair Fixtures |
| Compatibility | Single-layer and double-layer motherboards, chips, CPUs, hard drives, and other ICs |
| Supported Devices | Mobile phone motherboards, CPUs, chips, hard drives, and precision ICs |
| Technology | Heat-insulating tempered glass base with synthetic stone clamps, inward-angled bevel, bidirectional screw adjustment, heat resistance exceeding 500°C |
| Material | Tempered insulating glass and heat-resistant synthetic stone |
Common Repair Uses
- ✓Holding a motherboard steady during hot air rework
- ✓Chip debonding and IC removal
- ✓IC change on boards with a hardware fault
- ✓Board-level work on dead phones and boot loop issues
- ✓Charging issue repair on the power section
- ✓Microscope inspection and pad checking
- ✓Wiping flux and cleaning residue off the glass surface after repair
Compatible Devices
- ✓Universal board-level fixture — not tied to specific phone models
- ✓Single-layer mobile phone motherboards
- ✓Double-layer (stacked) motherboards
- ✓Mobile phone CPUs and processor chips
- ✓Precision ICs on bare boards
- ✓Memory and storage chips on boards
- ✓Hard drive PCBs
- ✓Other small PCBs that fit between the bevel clamps
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
What temperature can the RL-601Q tempered glass fixture handle?
Can the RL-601Q hold double-layer motherboards during hot air rework?
Related products
JZQ-599B Soldering Iron Tip Cleaner with Tin Cleaning Ball
Out of stock



