SUNSHINE SS-719 (T2) Magnetic Aluminum Screwdriver
₨ 1
SUNSHINE SS-719 T2 Torx Screwdriver for Precision Repair
The SUNSHINE SS-719 (T2) puts a dedicated Torx T2 tip on a magnetic aluminum handle. The S2 steel shaft carries the torque from your hand to the screw head, and the magnetic tip holds the fastener while you lift the bit out of the recess. This matters when you work inside a tight phone housing and a dropped screw costs time. The handle combines aluminum and steel with an anti-slip finish, so your grip stays steady through a longer session. It fits the disassembly stage of mobile phone, tablet, and laptop work, where T2 Torx fasteners appear. The tool is compact enough to keep in a toolbox next to your other precision drivers.
Out of stock
SUNSHINE SS-719 T2 Torx Screwdriver for Mobile and Electronics Repair
When you open a phone or tablet, one loose Torx screw can hold up the whole job. The SS-719 T2 Torx screwdriver covers that disassembly stage of the workflow. You remove the housing, bracket, or board fastener, then move on to the repair itself. The tip follows the T2 Torx profile, so it seats in the matching screw head rather than forcing a wrong bit into place. Keep it beside your other precision drivers and you can open and close devices without losing track of which screw belongs where.
Magnetic Tip and Aluminum Handle
The tip is magnetic, so it holds the screw as you lift the bit out of the recess. This helps on small fasteners that would otherwise drop into the case. The handle combines aluminum and steel, which keeps the tool light and gives the body a solid feel in the hand. The anti-slip grip supports a steady hold when you turn small screws with light pressure.
S2 Steel Shaft and Torx T2 Tip
The shaft is made from S2 steel, the material used across this SS-719 range. The T2 tip matches the six-point star recess, so the bit engages the full head when you seat it correctly. Check the recess size against the screw before you apply torque. A bit that sits loose in the recess will strip the head, and that turns a simple removal into a longer job.
Where the SS-719 T2 Fits in Your Workflow
Use this driver at the start and end of a device job. At the start, it removes housing and bracket screws so you can reach the board. At the end, it reseats those same fasteners during reassembly. The SS-719 family also includes other tip profiles, so you can build a set that covers the screw types in your daily workload. Keep this T2 tip in the same case as your other precision bits so the right profile is always within reach.
| Weight | 0.15 kg |
|---|
Key Features
- ✓Magnetic T2 Torx tip holds the screw during removal
- ✓Aluminum and steel handle for a light, solid feel
- ✓S2 steel shaft
- ✓Anti-slip grip for steady control
- ✓Compact length for toolbox or repair bench storage
Specifications
| Brand | SUNSHINE |
|---|---|
| Model | SS-719 (T2) |
| Category | Precision Screwdrivers |
| Compatibility | Torx T2 screw heads |
| Supported Devices | Mobile phones, tablets, laptops, and small electronics |
| Technology | Magnetic tip |
| Material | S2 steel shaft, aluminum and steel handle |
| Dimensions | 140 mm length |
| Weight | 0.15 kg |
Common Repair Uses
- ✓Removing T2 housing screws during phone disassembly
- ✓Unscrewing internal brackets to reach a board
- ✓Opening tablet casings for display or battery work
- ✓Loosening laptop bottom-cover screws
- ✓Reseating the same fasteners during reassembly
Compatible Devices
- ✓Torx T2 screw heads on mobile phones, tablets, and laptops (screw-head level, not model-specific)
- ✓Torx T2 fasteners on mobile phone housings
- ✓Torx T2 screws on tablet casings
- ✓Torx T2 screws on laptop bodies and brackets
- ✓Torx T2 fasteners in small electronic devices
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Is the tip magnetic?
What screw size does the SS-719 T2 fit?
Related products
Qianli 011 16-in-1 Glue Removal Knife for Mobile Repair
Out of stock
UFI eMMC BGA Soldering Adapter (8 Footprints) for UFI-Box
In stock



