MECHANIC 900M-T-IS Soldering Iron Tip for Precision Repairs

₨ 1

900M-T-IS Soldering Tip for 900M-Series Stations

The MECHANIC 900M-T-IS is a replacement soldering iron tip for 900M-T series stations, the 936-style irons common on phone and board repair benches. It has a copper core with a plated surface that resists oxidation and holds up through repeated heating cycles. Swap in a new 900M-T-IS when your current tip stops wetting properly, instead of replacing the whole iron. It suits jumper work, fine component leads, and general board-level touch-up where the joint needs steady heat at the working end.

Out of stock

12 People watching this product now!
Description

900M-T-IS Soldering Tip for Board-Level Repair Work

Your joint quality depends on how well the tip moves heat from the element to the solder. The 900M-T-IS uses a copper core with a plated finish, which conducts heat quickly toward the working end. The joint reaches solder temperature faster, so you spend less time holding the iron on a pad. In a typical phone repair workflow, this tip covers the stage where you handle jumper lines, lifted leads, and fine connector pins on the board.

Fit and Compatibility

The tip fits 900M-T series soldering stations, which are widely sold in 936-style configurations. Check your iron’s sleeve before ordering, because several 900M-family tips share a base but differ in working shape. Match the model number to the shape your work demands, and keep a spare of the same model at the bench.

Copper Core and Plated Finish

The copper core carries heat efficiently, while the plating slows oxidation at the working surface. Wipe the tip on a damp sponge or brass wool between joints. When the iron sits idle, keep the tip tinned, because a protective solder layer preserves the plating and helps the point hold solder.

Typical Uses at the Repair Bench

Use this tip for jumper wire soldering and for fine component leads on small boards. Common tasks include reconnecting a broken trace with a jumper, touching up a lifted pad, and reflowing a connector pin. Each of these jobs needs a stable, focused heat source, and a properly seated tip delivers it.

When to Replace the Tip

Replace the tip when the plating wears through or the working end stops holding solder. A new tip costs far less than a new station, and it restores the same heat transfer on your existing iron.

Additional information
Weight0.1 kg
Q & A
Please login to post questions

Key Features

  • Copper core for fast heat transfer
  • Plated surface that resists oxidation
  • Fits 900M-T series stations
  • Approx. 42 mm length
  • Approx. 6 mm outer diameter
  • Fine working end for detailed joints

Specifications

BrandMECHANIC
Model900M-T-IS
CategoryReplacement Soldering Iron Tips
Compatibility900M-T series soldering stations
TechnologyCopper core with plated finish
MaterialCopper core, plated surface
DimensionsLength approx. 42 mm, outer diameter approx. 6 mm

Common Repair Uses

  • Jumper wire soldering on board-level repairs
  • Soldering fine component leads
  • Touching up lifted pads
  • Reflowing connector pins
  • Reconnecting broken traces with a jumper
  • General PCB touch-up work

Compatible Devices

  • Scope is series-level, not device-specific: 900M-T series stations, plus 936-, 937- and 938-style soldering stations.
  • 900M-T series soldering stations
  • 936-style soldering stations
  • 937-style soldering stations
  • 938-style soldering stations
  • 900M-series heater-type soldering irons

FAQ

What is the product name?
The product name is MECHANIC 900M-T-IS Soldering Iron Tip.
What is the brand of this product?
The brand of this product is MECHANIC.
What is the model of this product?
The model of this product is 900M-T-IS.
What is this product used for?
This product is used for soldering jumper wires, fine component leads, and touching up PCB pads.
Which devices are compatible with this product?
This product is compatible with 900M-T series soldering stations, including 936-style stations.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Which stations fit the 900M-T-IS tip?
The tip fits 900M-T series stations, which are commonly sold in 936-style configurations. Confirm your iron’s sleeve matches the 900M-T series before ordering.
How do I stop the tip from oxidizing?
Wipe the tip on a damp sponge or brass wool between joints and keep it tinned when idle.