QianLi AirPods Disassembly Fixture with 360° Rotation

₨ 5,500

AirPods Disassembly Fixture With 360° Rotation

The QianLi AirPods disassembly fixture holds AirPods 1st generation, AirPods 2nd generation and AirPods Pro shells firmly while you open them. Its body is CNC machined from high-density oxidized aluminum alloy, so the clamp keeps its shape through repeated bench use. Curvature-matched slots stop the shell from shifting under pry pressure, and the 360 degree rotation lets you reach the seam from every side without removing the earphone. It replaces tape and improvised clips, which often slip or leave marks on the housing. Use it for AirPods battery replacement and case opening.

Out of stock

20 People watching this product now!
Description

An AirPods Disassembly Fixture for Stable Battery Replacement

An AirPods disassembly fixture pays for itself the first time it keeps a curved shell from slipping under your pry tool. This QianLi model holds AirPods 1st generation, AirPods 2nd generation and AirPods Pro firmly, so the force you apply goes into the seam instead of into the housing. Most cracked shells come from units held by hand or taped to a surface, where a small shift turns into a broken clip. Once the earphone sits locked in a rigid cradle, you control the angle and the pressure. For a shop that offers AirPods battery replacement as a regular service, a stable holder reduces rework and keeps customers coming back with their earphones intact. Your opening sequence becomes repeatable, and that repeatability is what protects your turnaround time on busy days.

CNC Aluminum Body Built for Daily Bench Work

The frame is made from high-density oxidized aluminum alloy and machined to precise tolerances on CNC equipment. The result is a one-piece profile that refuses to bend when you tighten the clamp across dozens of units each week. Plastic holders flex over time, and their grip fades so gradually that you may not notice until a shell cracks mid-job. A metal body keeps its geometry, so the clamping force you set on the first job still applies on the fiftieth. The oxidized finish also handles the heat and wear of a busy station, especially when the fixture sits close to a hot air tool. Because it stays rigid, the fixture replaces the tape and makeshift clips that tend to slip at the worst possible moment. Your bench stays organized, and every opening starts from the same reliable base.

Curvature-Matched Clamp Slots for AirPods Pro Repair

The clamp slots follow the curve of the AirPods shell instead of a generic cup shape. Your earphone sits flush against the holder, which stops it from floating or rotating while you pry along the seam. The same fit works across AirPods 1st generation, AirPods 2nd generation and AirPods Pro, so you do not need a separate holder for each model. Close contact also protects the surface, because the clamp edges do not bite into the housing the way a loose clip does. Customers notice this difference when their case comes back without new marks on the shell. Seat the unit fully before you apply any pressure, since a partly seated shell gives a false sense of hold that fails once force builds up.

360-Degree Rotation for Full Seam Access

The rotating base lets you turn the fixture while the earphone stays locked in place. Shell seams usually need working around the full perimeter, and a single fixed angle leaves part of the joint out of reach. Rotating the holder keeps your hands free to control the pry tool, instead of repositioning the earphone by hand and losing your grip. Work the seam in short passes, moving around the body in a steady sequence. Pause to reposition only when the shell resists, rather than adjusting after every few millimeters. This single change in workflow saves time on every job and lowers the risk of a tool slipping into the battery area.

Additional information
Weight0.10 kg
Q & A
Please login to post questions

Key Features

  • CNC-machined high-density oxidized aluminum alloy body
  • One-piece profile that resists deformation under repeated clamping
  • Curvature-matched clamp slots for AirPods shells
  • 360-degree rotation to reach the seam from any angle
  • Holds AirPods 1st Gen, AirPods 2nd Gen and AirPods Pro
  • Non-scratch clamping surface protects the housing
  • Anti-slip grip prevents shifting under pry pressure
  • Compact footprint sits beside standard opening tools

Specifications

BrandQianLi
CategoryMobile Repair Soldering Accessories
CompatibilityAirPods 1st Generation, AirPods 2nd Generation, AirPods Pro
Supported DevicesAirPods 1st Generation, AirPods 2nd Generation, AirPods Pro
TechnologyCNC-machined aluminum alloy clamp with 360-degree rotation
MaterialHigh-density oxidized aluminum alloy

Common Repair Uses

  • Battery replacement and shell opening on AirPods, scoped to the three verified models.
  • AirPods 1st Generation battery replacement
  • AirPods 2nd Generation battery replacement
  • AirPods Pro battery replacement
  • Earphone shell opening and case disassembly without scratching the housing

Compatible Devices

  • Verified scope is AirPods 1st Generation, AirPods 2nd Generation and AirPods Pro, the three models in the product’s own specification.
  • AirPods 1st Generation
  • AirPods 2nd Generation
  • AirPods Pro

FAQ

What is the product name?
The product name is QianLi AirPods Disassembly Fixture with 360° Rotation.
What is the brand of this product?
The brand of this product is QianLi.
What is the model of this product?
The model is not listed in the product specification, so no model name is given.
What is this product used for?
This product is used to hold AirPods shells steady during battery replacement and case opening.
Which devices are compatible with this product?
This product is compatible with AirPods 1st Generation, AirPods 2nd Generation and AirPods Pro.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Which AirPods models does this fixture hold?
It holds AirPods 1st generation, AirPods 2nd generation and AirPods Pro, with clamp slots shaped to each shell’s curvature.
Will the clamp mark the AirPods shell during opening?
The clamp surface is designed to be non-scratch and anti-slip, so the housing stays protected when the earphone is seated correctly.