SUNSHINE SS-719 (T3) Magnetic Aluminum Screwdriver

₨ 1,099

T3 Magnetic Aluminum Screwdriver for Precise Torx Work

The SUNSHINE SS-719 (T3) is a magnetic screwdriver built around a T3 Torx tip, a size technicians reach for when opening small electronic housings. The magnetic tip holds the screw during insertion, so fewer fasteners end up dropped into a board or battery cavity. The aluminum body keeps the handle light and steady through long sessions at the bench. Use it when a T3 fastener needs to come out cleanly without stripping the head. It suits technicians who want a dedicated driver for routine disassembly, reassembly, and fastener replacement.

In stock

20 People watching this product now!
Description

T3 Magnetic Screwdriver for Mobile Repair Workflows

Every mobile repair job starts with clean disassembly. The SUNSHINE SS-719 (T3) Magnetic Aluminum Screwdriver is a T3 magnetic screwdriver built for that first step. It drives T3 Torx fasteners, and its magnetic tip keeps a small screw seated while you start the thread. On your repair bench, this tool comes before testing, flashing, or IC work begins. Matching the bit to the fastener head protects both the screw and the housing. The sections below show where it fits and how to use it with care.

Where This Driver Fits in Your Repair Workflow

Disassembly is the stage where most avoidable damage happens, so the driver you pick sets the tone for the whole job. You open the housing, lift the cover, and only then reach the board, connectors, and components. A T3 driver suits that opening stage when the fasteners match its tip size. Use it to remove the screws, keep them grouped by location, and set them aside in order. When you reassemble, the same driver lets you seat each screw without forcing it. Treat the first few minutes of any job as a driver check, not a rush. Confirming the fit at this stage saves you from stripped heads later in the process.

Why the Magnetic Tip Matters on a Crowded Bench

Small screws disappear fast on a repair bench, especially near open boards and battery cavities. A magnetic tip grabs the fastener head and holds it while you line up the thread, which cuts down on dropped screws and fumbling with tweezers. You still need to check the fit, because magnetism helps placement but does not replace a correct bit match. Keep the tip clean of metal dust and swarf, since debris reduces grip over time. A steady hand and a straight insertion angle do more for a clean seat than any tip alone. Your bench layout matters here too, so keep a tray within easy reach.

Handling the Aluminum Body and Keeping the Tip Intact

An aluminum body gives you a light, cool handle that stays stable through long sessions. Hold the driver with a relaxed grip and let the bit do the work rather than leaning your weight into the screw. Store the driver away from moisture, because exposed metal can corrode in humid conditions. Inspect the T3 tip before each job for rounding or chipping, and retire a worn bit before it strips a fastener head. A worn tip costs more time than a new one, so replace it early. Wiping the handle after a long session keeps grime from building up in the grip area.

Pairing This Driver With Other Bench Tools

A screwdriver rarely works alone, and it fits neatly into a complete bench setup. Pair it with a magnetic mat or tray so removed screws stay in sequence. Once the housing is open, move to a microscope or magnifier to inspect screw bosses and board edges. Multimeters and PCB holders then handle the testing and rework stages that follow. If you are building out a full kit, the same bench supports the rest of your disassembly tools. Keep the layout consistent across jobs so every device follows the same path from opening to closing.

Additional information
Weight0.15 kg
Q & A
Please login to post questions

Key Features

  • T3 Torx tip
  • Magnetic tip holds screws in place during insertion
  • Aluminum body

Specifications

BrandSUNSHINE
ModelSS-719
CategoryScrewdrivers
CompatibilityT3 Torx fasteners
TechnologyMagnetic tip
MaterialAluminum

Common Repair Uses

  • Opening a housing held by T3 Torx screws
  • Removing and refitting T3 screws during a back cover or battery change
  • Holding small screws in place during reassembly on a crowded bench
  • Tightening T3 fasteners to seat without stripping the head

Compatible Devices

  • Universal, not device-specific. Scope is the T3 Torx fastener type.
  • T3 Torx fastener heads
  • Small Torx screws on electronic device housings

FAQ

What is the product name?
The product name is SUNSHINE SS-719 (T3) Magnetic Aluminum Screwdriver.
What is the brand of this product?
The brand of this product is SUNSHINE.
What is the model of this product?
The model of this product is SS-719.
What is this product used for?
This product is used for opening and reassembling devices held by T3 Torx fasteners.
Which devices are compatible with this product?
This product is compatible with T3 Torx fasteners and is not device-specific.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
What bit size does the SS-719 use?
The SS-719 uses a T3 Torx tip.
Does the tip hold screws magnetically?
Yes, the tip is magnetic, which helps hold a screw during insertion.