Mechanic OriFix 3-in-1 Dual-Axis Motherboard Fixture
₨ 4,500
OriFix Dual-Axis Motherboard Fixture
The Mechanic OriFix dual-axis motherboard fixture gives repair technicians a stable, double-bearing clamp for iPhone and Android boards. Two linked axes lock a motherboard at the angle you need, so both hands stay free for hot air rework, CPU and NAND removal, and dot projector repair. Chip positioning slots and component storage slots sit beside the clamp, which keeps lifted ICs and small parts organised during the job. A thickened double-layer bottom plate holds the fixture steady on your bench, and the 180 x 90 x 20 mm body fits next to a microscope or hot air station. Mechanicpk supplies the OriFix across Pakistan for workshops and service centers.
In stock
Dual-Axis Motherboard Fixture Built for Chip-Level Mobile Repair
The Mechanic OriFix is a dual-axis motherboard fixture for technicians who hold iPhone and Android boards steady through CPU, NAND and dot projector work. Two bearing-driven clamping axes link together, so you lock a board at the exact angle you need and keep both hands free for the hot air gun, the tweezers and the microscope. The sections below explain how the clamp holds a board, how the slots organise your bench, and where the fixture fits in a board-level repair.
How the Double-Bearing Clamp Holds Your Board
The OriFix runs a double-axis linkage with a dislocation buckle. Two supports share the clamping load, so the jaws stay rigid when you tighten a board and resist slipping when you press with a blade or tweezers. The design covers the range of motherboard sizes in the market, so a compact Android mainboard and a larger iPhone logic board both seat firmly between the jaws. A thickened double-layer bottom plate adds weight underneath, which keeps the fixture planted while you work. The body measures 180 x 90 x 20 mm, a footprint that sits beside a microscope or under a hot air station without crowding your bench.
Chip Positioning and Component Storage Slots
Beyond the clamp, the OriFix adds chip positioning slots and component storage slots on the same plate. You park a lifted CPU, NAND or small IC in a slot while you clean pads and refresh solder, instead of hunting for a clear spot on your mat. Screws, shields and tiny parts stay within reach, which matters on a dead phone job where you swap several components in sequence and need to track each one. A fixed home for every part cuts the risk of losing a chip under the microscope.
Where the OriFix Fits in Your Repair Workflow
Reach for the OriFix at the start of any board-level job. Strip the phone, remove the shields, then clamp the motherboard and tilt it into focus under your microscope. From there you remove the target chip with a hot air station, clean the pads with a soldering station, reball with a stencil from your reballing kit, and refit the IC. On iPhone dot projector repair, the locked clamp keeps the board level while you handle fine components. Once the rework finishes, release the board and check rails with a multimeter before you power on. If you need more clamping capacity on a busy bench, browse the PCB Holders category and pair the OriFix with a second fixture for parallel work. For hardware fault jobs that demand repeated heating and cooling cycles, a rigid fixture protects the board from the slight movements that wreck pad alignment.
| Weight | 0.8 kg |
|---|
Key Features
- ✓Dual-axis linkage with dislocation buckle for a rigid hold
- ✓Double-bearing design for smooth clamp adjustment
- ✓Universal fit for iPhone and Android motherboards
- ✓Design covers the range of motherboard sizes on the market
- ✓Chip positioning slots next to the clamp
- ✓Component storage slots for small parts
- ✓Thickened double-layer bottom plate for bench stability
- ✓Compact 180 x 90 x 20 mm body
Specifications
| Brand | Mechanic |
|---|---|
| Model | OriFix |
| Category | Motherboard Fixture / PCB Holder |
| Compatibility | Universal for iPhone and Android motherboards |
| Technology | Dual-axis double-bearing clamping |
| Dimensions | 180 x 90 x 20 mm |
Common Repair Uses
- ✓Board holding and chip positioning during chip-level mobile repair
- ✓CPU removal and refit
- ✓NAND removal and refit
- ✓Dot projector repair on iPhone boards
- ✓IC removal with a hot air station
- ✓Pad cleaning and solder refresh
- ✓Reballing preparation and refit
- ✓Holding a board at an angle under the microscope
- ✓Organising lifted chips and small components during repair
Compatible Devices
- ✓Universal fixture for iPhone and Android motherboards; not limited to specific phone models
- ✓iPhone logic boards
- ✓Android phone motherboards
- ✓Mainstream mobile motherboards across different sizes
- ✓Boards carrying CPU chips
- ✓Boards carrying NAND flash chips
- ✓Boards with a dot projector module
- ✓Boards in chip-level and board-level repair
- ✓Mobile mainboards held for hot air rework
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
What size is the Mechanic OriFix motherboard fixture?
Does the OriFix hold both iPhone and Android boards for CPU and NAND work?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock
Qianli 011 16-in-1 Glue Removal Knife for Mobile Repair
Out of stock



