Mechanic Ultrafine Non-Dust Cloth 50 PCS/Box
₨ 1
Anti-Static Non-Dust Cloth for Repair Benches
The Mechanic ultrafine non-dust cloth gives your repair bench a lint-free wiping surface for LCD panels, back glass, camera lenses and bare PCBs. The polyester fibre construction and anti-static finish lift dust and fingerprints instead of pushing them around, so you seal a display or close a phone without specks trapped underneath. The drawer-style box holds 50 wipers and keeps them clean until you pull one out. Technicians cleaning screens before bonding, wiping boards after flux removal, or polishing lenses before reassembly get a consistent result on every wipe. One box stocks a single bench for weeks, and shops buy it by the carton.
Out of stock
Ultrafine Non-Dust Cloth for Mobile Repair: Lint-Free Cleaning at Your Bench
The Mechanic ultrafine non-dust cloth for mobile repair gives your bench a clean wiping surface before you bond a screen, refit a camera lens, or inspect a board under the microscope. Each 50 PCS box holds anti-static polyester wipers that pick up dust and fingerprints without shedding fibres onto the glass. If you lose time to specks under a display or lint around a camera ring, you see the difference on the first panel. The drawer-style box keeps the wipers sealed from workshop dust and within reach while you work.
Anti-Static Polyester Construction That Holds Dust
The cloth uses polyester fibre with an ultrafine, soft texture. Anti-static behaviour matters at a repair bench, because a charged wiper attracts dust and drops it back onto the surface you just cleaned. This cloth resists that effect, so particles lift off and stay in the fabric. The non-dust design also avoids the loose fibres that ordinary tissue and cotton rags leave behind. You get a streak-free finish on touch glass, OLED and LCD surfaces, camera glass and plastic housings without extra polishing passes.
Where It Fits in Your Repair Workflow
Display problem jobs use this cloth first. Wipe the frame and the back of the new panel before bonding, and no dust ends up trapped under the glass. Back glass replacement follows the same pattern: clear the adhesive residue, then wipe the surface clean before you press the new panel on. Camera lens work needs a dust-free finish, so a fresh wiper removes oil and fingerprints before reassembly.
On the board side, use it during PCB repair after hot air and soldering work. Remove flux residue, wipe the surface, and check your joints under the microscope without lint scattering the view. Liquid-damaged dead phone cases and charging issue repairs also benefit from a clean board before you start diagnosing a hardware fault. The cloth sits naturally beside your hot air station, soldering station, PCB holder and reballing kit.
Why Technicians and Shops Buy the 50 PCS Box
A 50 PCS box keeps one bench stocked for weeks and gives shop owners a clean per-job wiper instead of a reused rag. Use one fresh wiper per panel and you never carry dust from one repair to the next. The drawer-style packaging cuts waste at the counter, since each pull delivers a single clean sheet. Service centres running several benches reorder by the carton to keep every technician on the same cleaning standard. Pair the cloth with microscopes, multimeters, test boxes and ISP pinout tools from the Mechanicpk catalogue to cover the full repair bench from diagnosis to final clean.
| Weight | 0.11 kg |
|---|
Key Features
- ✓Ultrafine, soft polyester fibre construction
- ✓Non-dust design for a lint-free finish
- ✓Anti-static properties stop dust re-adhering
- ✓Streak-free wiping on glass and lenses
- ✓Drawer-style box for one-at-a-time dispensing
- ✓50 PCS per box for bench and workshop supply
- ✓Suitable for personal and professional repair use
- ✓Safe for screens, lenses and PCB surfaces
Specifications
| Brand | MECHANIC |
|---|---|
| Category | Dust-Free Cleaning Cloth / Wiping Tissue |
| Compatibility | Universal — not device-specific |
| Material | Polyester fibre |
| Package | Box, 50 PCS |
Common Repair Uses
- ✓Cleaning LCD and OLED panels before bonding
- ✓Wiping the frame before fitting a new display
- ✓Removing fingerprints and oil from back glass
- ✓Polishing camera lenses before reassembly
- ✓Removing dust before laminating or fitting a screen protector
- ✓Wiping flux residue from boards after soldering
- ✓Cleaning boards before microscope inspection
- ✓General bench and housing cleaning
Compatible Devices
- ✓Smartphone LCD and OLED displays
- ✓Touch glass and digitizer surfaces
- ✓Back glass panels
- ✓Camera lens and camera ring glass
- ✓Tablet screens
- ✓Smartwatch glass
- ✓Bare PCBs and motherboards
- ✓Plastic and metal phone housings
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Does this cloth leave lint on LCD screens and camera lenses?
Can I use this cloth on a PCB after flux cleaning?
Related products
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock
RELIFE RL-004SA silicone pad – Anti-slip
In stock



