Sunshine DT-9205E Digital Multimeter
Sunshine DT-9205E Digital Multimeter Original price was: ₨ 2,500.Current price is: ₨ 2,200.
Back to products

KOOCU BL-18 150ml Glass Alcohol Bottle

₨ 900

BL-18 Glass Alcohol Dispenser

The KOOCU BL-18 is a 150ml glass alcohol bottle for mobile repair benches, built around a metal press dispenser and a wide-caliber body. You press once and the pump releases a controlled amount of isopropyl alcohol or cleaning liquid onto your swab or cloth, so you waste less IPA during board cleaning. The high borosilicate glass body shows the liquid level at a glance, and the wide opening lets you refill straight from a larger IPA container. Keep it beside your soldering station for flux residue cleanup, motherboard washing, and connector cleaning on every job. Mechanicpk supplies the BL-18 to repair shops and technicians across Pakistan.

Out of stock

15 People watching this product now!
Description

Glass Alcohol Bottle for Mobile Repair: KOOCU BL-18 150ml

The KOOCU BL-18 is a glass alcohol bottle for mobile repair work. It holds 150ml of isopropyl alcohol or cleaning liquid and delivers it through a metal press dispenser. The wide-caliber design lets you refill from a standard IPA container without a funnel, and the borosilicate glass body keeps the liquid visible on your bench. A shop that cleans boards all day gets more from controlled dispensing than from an open dish or a squeeze bottle. Each press releases a measured amount, and you stop pouring more alcohol than the job needs.

Material and Dispensing Design

The BL-18 uses high borosilicate glass for the body, which suits the IPA and cleaning liquids technicians handle around PCBs. The metal press head works with one hand. You press the dispenser onto a cotton swab, lint-free cloth, or cleaning brush, and the pump feeds liquid to that contact point. That single-hand action leaves your other hand free to hold a board in a PCB holder or steady a connector under the microscope. The wide-caliber build also shortens refill time, which matters when you clean dozens of boards per day.

Where It Fits in the Repair Workflow

Cleaning happens at almost every stage of board-level repair, and the BL-18 covers those stages:

  • Liquid damage boards. You wash corrosion residue off a dead phone’s motherboard before you test with a multimeter.
  • After IC change karna or reballing. You remove flux residue around the pads once your hot air station and reballing kit finish the rework.
  • Soldering station work. You clean joints and pads before and after you solder, so a clean surface gives you a clean inspection under the microscope.
  • Connector and port cleaning. You clear charging port and battery connector contamination that causes a charging issue or a hardware fault.
  • Frame and screen work. You wipe adhesive and dirt off frames and screen edges during display replacement.

Pair it with the Hot Air Stations, Soldering Stations, Reballing Kits, Microscopes, PCB Holders, and Multimeters in our catalog to build a complete bench setup.

Capacity and Bench Fit

At 150ml, the BL-18 sits in the practical middle range. It holds enough IPA for a full day of cleaning without taking much bench space, and it stays light enough to move between workstations. Shops with several technicians can assign one bottle per station and keep each bottle dedicated to a single liquid. Label the bottle with its contents, because alcohol and other cleaning liquids look identical in clear glass. Keep the bottle away from an active hot air nozzle and a hot soldering iron tip, because IPA is flammable.

Why Technicians and Shop Owners Choose the BL-18

You pay for a glass dispenser once and refill it for months, while disposable squeeze bottles leak, collapse, and pour too much. The press mechanism cuts alcohol consumption, which lowers your monthly consumable cost across a busy workshop. The glass body also lets you check the level before a long repair, so the liquid never runs out in the middle of a job. For a service center that cleans boards on every ticket, that consistency adds up across hundreds of repairs.

Additional information
Weight0.3 kg
Q & A
Please login to post questions

Key Features

  • 150ml glass bottle sized for daily workshop use
  • High borosilicate glass body
  • Metal press dispenser head
  • One-press liquid release, so you waste less alcohol
  • Wide-caliber design for easy refilling
  • Clear body shows the liquid level at a glance
  • Handles alcohol, IPA, and cleaning liquids
  • Suits mobile repair, PCB cleaning, and electronics maintenance

Specifications

BrandKOOCU
ModelBL-18
CategoryMobile Repair Accessories, Cleaning Bottles
CompatibilityUniversal, not device-specific
Supported DevicesUniversal, not device-specific
MaterialHigh Borosilicate Glass
Capacity150ml
Pump HeadMetal Press Dispenser
DesignWide Caliber

Common Repair Uses

  • Dispensing IPA and cleaning liquids during mobile repair and PCB maintenance.
  • Motherboard cleaning after liquid damage
  • Flux residue removal after IC change karna
  • Pad and joint cleaning during reballing
  • Cleaning before microscope inspection
  • Charging port and connector cleaning
  • Frame and screen edge adhesive cleanup
  • Board cleaning before multimeter testing
  • General electronics maintenance at the workshop bench

Compatible Devices

  • Universal accessory for cleaning work on any phone brand. Not tied to a specific device or chipset.
  • Samsung motherboards and sub-boards
  • iPhone logic boards
  • Oppo and Vivo motherboards
  • Infinix and Tecno motherboards
  • Xiaomi and Realme motherboards
  • Charging port and battery connector areas on any phone
  • Phone frames and screen edges
  • Any PCB that needs IPA or cleaning liquid

FAQ

What is the product name?
The product name is KOOCU BL-18 150ml Glass Alcohol Bottle.
What is the brand of this product?
The brand of this product is KOOCU.
What is the model of this product?
The model of this product is BL-18.
What is this product used for?
This product is used for dispensing alcohol, IPA, and cleaning liquids during mobile repair, PCB cleaning, and electronics maintenance.
Which devices are compatible with this product?
This product is a universal accessory and is not device-specific. You can use it for cleaning work on any phone brand or PCB.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Can I use the BL-18 for isopropyl alcohol (IPA) board cleaning?
Yes. The BL-18 dispenses alcohol, IPA, and cleaning liquids, and it suits mobile repair and PCB cleaning work.
Does the BL-18 dispense a controlled amount per press?
Yes. The metal press dispenser releases liquid with one press, which helps you reduce alcohol wastage during repair work.