JTX CT-1 Coil Inductance Tester for Mobile Repair
₨ 1,350
JTX CT-1 Coil Tester Overview
JTX CT-1 Coil Inductance Tester gives your bench a fast pass/fail check for coils and inductors on mobile phone, laptop and PC motherboards. The JTX CT-1 uses electromagnetic induction sensing, and a green light tells you the inductor responds as a healthy coil should. You get a pocket-size tool that weighs roughly 30 g and suits SMD, DIP and transformer-type components. Technicians use this coil inductance tester for mobile repair when a dead phone, charging issue or no-power fault points toward the power-rail coils. Mechanicpk supplies the JTX CT-1 to repair shops and service centers across Pakistan.
In stock
Coil Inductance Tester for Mobile Repair: JTX CT-1 Overview
The JTX CT-1 Coil Inductance Tester fills a narrow but useful gap on the repair bench. It checks whether a coil or inductor responds correctly before you lose an hour chasing a fault somewhere else on the board. As a coil inductance tester for mobile repair, it senses the component through electromagnetic induction and lights a green indicator when the coil behaves as it should. The CT-1 comes from JTX, also written as JITONGXUE, and targets phone, laptop and PC motherboard work. Mechanicpk stocks it for technicians and repair shops across Pakistan who want a quick first-pass coil check without setting up a full LCR measurement.
How the JTX CT-1 Tests a Coil
The CT-1 works on electromagnetic induction. Instead of reading raw resistance, it listens for the inductive response of the coil, and the green light confirms a working inductor. You connect the tester to the component, read the indicator, and move on. Distributor documentation describes testing of SMD, DIP and transformer components directly on the PCB, which saves you from lifting parts just to check them. On a phone board, that covers the tiny SMD inductors around the PMIC, charging circuit and backlight driver, and on a laptop or PC board it covers the larger power-stage coils near the CPU and VRM area. The result is a pass/fail indication, not a numeric microhenry value. That matches how most bench decisions go: you need to know whether the coil is alive, not its third decimal place. When the green light does not appear, treat that coil as suspect and verify it with your multimeter or an LCR meter before you commit to an IC change.
Where the CT-1 Fits in Your Repair Workflow
Start your hardware fault diagnosis under a Microscope, then bring in the CT-1 once the board shows no obvious burn marks or corrosion. A dead phone with no current draw, a charging issue, a display problem with a dark backlight, or a network issue after a drop all send technicians toward the coils on the power, charging and RF sections. The CT-1 quickly clears the healthy ones, so you spend your time on the parts that fail. If a coil fails, secure the board in a PCB Holder, lift the part with a Soldering Station or Hot Air Station, and fit the replacement. If every coil passes and the phone stays dead after flash or hangs on logo, shift your attention to the data side with ISP Pinout Tools, eMMC Programmers, UFS Adapters or a Test Box. Reballing Kits come in when the fault traces back to a BGA joint rather than a discrete coil.
What to Know Before You Buy
Set the right expectation first: treat the CT-1 as a pass/fail screening tool, not a bench LCR meter. It tells you whether a coil responds. That answer alone cuts diagnosis time on boards where a dozen coils sit near each other. Pair it with a Multimeter for continuity and short-circuit checks, and keep a proper LCR meter nearby for the rare job that needs an exact inductance value. Sellers list the CT-1 at about 30 g, so it rides easily in a tool tray or a shirt pocket and takes no bench space. Simple operation keeps training short, which helps service centers and technical institutes that onboard new technicians. Shops that handle heavy volumes of charging and power-rail repairs gain the most, because every healthy coil you clear quickly is one less part you desolder, test and resolder. If you outgrow pass/fail testing, the upgrade path runs from this tester to a quality Multimeter, then to a bench LCR meter paired with a Microscope for close inspection. Mechanicpk supplies the JTX CT-1 to repair shops across Pakistan, so you can add it to an existing bench setup with your next tool order.
| Weight | 0.35 kg |
|---|
Key Features
- ✓Electromagnetic induction sensing for coils and inductors
- ✓Green indicator light confirms a working inductor
- ✓Simple pass/fail result for fast bench decisions
- ✓Tests SMD, DIP and transformer components directly on the PCB
- ✓Suits mobile phone, laptop and PC motherboards
- ✓Compact body at roughly 30 g
- ✓Simple operation for beginners and experienced technicians
- ✓Fits tool trays and field-service kits
Specifications
| Brand | JTX (JITONGXUE) |
|---|---|
| Model | CT-1 |
| Category | Coil and Inductor Tester |
| Compatibility | Universal, not device-specific (tests coils and inductors on phone, laptop and PC boards) |
| Supported Devices | Mobile phone, laptop and PC motherboards |
| Technology | Electromagnetic induction sensing with green indicator light |
| Weight | Approx. 30 g |
Common Repair Uses
- ✓Coil and inductor screening during board-level fault finding.
- ✓Screening power-rail coils on a dead phone
- ✓Checking charging-circuit inductors during a charging issue diagnosis
- ✓Verifying backlight boost coils on display problem boards
- ✓Checking RF-section coils on network issue boards
- ✓Confirming coil health after a short-circuit repair
- ✓Verifying a replacement coil before you fit it
- ✓Screening inductors on laptop and PC motherboards
- ✓Running coil-testing exercises for new technicians in training
Compatible Devices
- ✓Universal, not device-specific. The tester works on coils and inductors, so it covers any board that carries them.
- ✓Mobile phone motherboards (all brands)
- ✓Laptop motherboards
- ✓PC and desktop motherboards
- ✓SMD inductors mounted on the board
- ✓DIP coils
- ✓Transformer components
- ✓BGA-style mobile phone PCBs
- ✓Small electronic modules and PCBs
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Does the JTX CT-1 show an inductance value in microhenries?
Can the JTX CT-1 test a coil without removing it from the motherboard?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock
UFI eMMC BGA Soldering Adapter (8 Footprints) for UFI-Box
In stock



