Mechanic UV-559 Jar Halogen Free BGA Flux Paste (100G)

Original price was: ₨ 1,800.Current price is: ₨ 1,600.

Halogen Free BGA Flux Paste for Chip-Level Rework

Mechanic UV-559 Jar Halogen Free BGA Flux Paste (100G) gives your bench a no-clean, lead-free flux for BGA, CSP, PGA, and flip chip work. The 100 g jar suits shops that reball and reflow every day, whether the job is an eMMC, a CPU, or a power IC on a dead phone. The paste wets pads fast, holds solder balls in place, and survives multiple PCB reflow passes. It leaves minimal, non-corrosive residue after soldering. Pair it with a hot air station, a reballing kit, and a microscope to get clean, repeatable joints from Mechanicpk in Pakistan.

In stock

15 People watching this product now!
Description

Halogen Free BGA Flux Paste Built for Reballing and Reflow Work

Mechanic UV-559 Jar Halogen Free BGA Flux Paste (100G) gives you a dependable halogen free BGA flux paste for reballing, reflow, and chip-level rework. The 100 g jar holds a no-clean, lead-free formula that wets pads quickly and keeps solder balls seated while heat does its work. Mechanicpk supplies it to Pakistani repair shops that run IC-level jobs daily, from a dead phone with a lifted eMMC to a hang on logo board that needs a CPU reflow.

Formula Profile and Technical Behavior

UV-559 belongs to Mechanic’s 559-series flux pastes. Supplier documentation describes it as a no-clean, lead-free flux with good solder-stickiness, strong anti-wet capacity, and a weakly acidic character. The paste has a milky color, and the halogen free formulation keeps corrosive halide content out of the joint. You apply it to pads or under a package, and it activates as your hot air station or reflow setup brings the board up to temperature. The formula supports multiple PCB reflow cycles, which matters when a board needs a second pass after you reposition a chip or correct a bridge.

Where It Sits in the Reballing Workflow

Every BGA job follows the same sequence: lift the chip, clean the pads, apply flux, place balls through a stencil, and reflow. UV-559 enters at the flux stage and again before you seat the chip back on the board. A thin, even layer helps the solder ball align itself and form a strong joint on BGA, PGA, CSP, and flip chip packages. When you handle IC change karna on a charging issue board or a display problem board, fresh flux on both the pads and the package gives the solder a clean path to flow. For ISP and eMMC jobs, the same paste supports the reballing step after you finish removing a chip and cleaning the board. Keep your soldering station, hot air station, and PCB holder ready before you open the jar, because flux works best when you move straight from application to heat.

Residue, Reflow, and Jar Handling

The no-clean formula leaves a minimal, non-corrosive residue after soldering. Many technicians still wipe the area with isopropyl alcohol under the microscope before they close up a phone, and that choice stays with you and your workshop standard. Scoop the paste with a clean spatula or brush rather than your fingers, and close the jar tightly after each job. Store it away from direct sunlight and heat so the paste keeps a consistent texture from the first repair to the last.

Why Technicians Pick the 100G Jar

A jar format suits the volume of a working service center. You get 100 g of paste for hundreds of reballing and reflow jobs, which lowers your cost per repair compared with small syringes. The wide opening lets you load a brush or spatula quickly, so you spend less time fighting a plunger and more time on the board. Shop owners who train junior technicians benefit most, because a single jar at the shared bench keeps the process consistent across the whole team. Pair the jar with solder balls, stencils, and a reliable hot air station from the Mechanicpk range, and you cover the full reballing chain from one supplier.

Additional information
Weight0.100 kg
Q & A
Please login to post questions

Key Features

  • 100 g jar for high-volume reballing and reflow work
  • No-clean formula that leaves minimal residue
  • Halogen free formulation
  • Lead-free flux suited to BGA, PGA, CSP, and flip chip packages
  • Good solder-stickiness that holds balls in place
  • Strong anti-wet capacity for smooth pad coverage
  • Supports multiple PCB reflow cycles
  • Weakly acidic character for solid wetting on mobile PCB pads

Specifications

BrandMechanic
ModelUV-559
CategoryBGA Flux Paste / Soldering Consumables
CompatibilityBGA, PGA, CSP, and flip chip packages; SMD components and mobile phone PCBs
TechnologyNo-clean, lead-free, halogen-free flux paste
Weight100 g net (jar)

Common Repair Uses

  • Flux support during reballing, reflow, and chip-level rework on mobile and computer PCBs
  • BGA reballing after chip removal
  • eMMC and CPU reflow on dead phone and hang on logo boards
  • IC change karna on charging issue boards
  • SMD rework on display problem boards
  • Pad tinning and solder ball placement through stencils
  • Reseating a chip with hot air after pad cleaning
  • Laptop and computer chip reballing
  • Second-pass reflow after repositioning a chip

Compatible Devices

  • Universal flux paste for BGA, PGA, CSP, and flip chip packages — not device-specific
  • Smartphone logic boards (all brands)
  • BGA packages such as eMMC and CPU chips
  • CSP packages
  • PGA packages
  • Flip chip packages
  • SMD components on mobile PCBs
  • Computer and laptop PCB chips
  • Boards that need multiple reflow passes

FAQ

What is the product name?
The product name is Mechanic UV-559 Jar Halogen Free BGA Flux Paste (100G).
What is the brand of this product?
The brand of this product is Mechanic.
What is the model of this product?
The model of this product is UV-559.
What is this product used for?
This product is used for BGA reballing, reflow, and chip-level rework on mobile phone and computer PCBs.
Which devices are compatible with this product?
This product is a universal flux paste for BGA, PGA, CSP, and flip chip packages, so it works across smartphone and PCB boards rather than specific phone models.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Can UV-559 flux paste handle multiple reflow passes?
Yes. Supplier documentation lists the formula as suitable for multiple PCB reflow, so you can reflow a board again after repositioning a chip.
Does UV-559 flux paste work on CSP and flip chip packages as well as BGA?
Yes. Supplier documentation lists BGA, PGA, CSP, and flip chip operation as intended uses for this flux paste.