YCS Halogen Free No Clean Solder Flux Paste 10cc

₨ 550

Halogen Free No Clean Flux Paste

The YCS Halogen Free No Clean Solder Flux Paste 10cc (Milky White) gives your bench a lead-free, halogen-free flux for BGA chip tinning and mobile phone chip soldering. The paste insulates solder joints to reduce short-circuit risk, produces less smoke while you work, and keeps its flow stable on precision circuits. You apply it to chip pads on phone and PC boards before tinning or reflow, and the no-clean formula skips the heavy cleanup routine. The 10cc size suits technicians who run daily board repairs and want a dependable halogen free no clean solder flux paste from Mechanicpk.

In stock

10 People watching this product now!
Description

Halogen Free No Clean Solder Flux Paste for Mobile Board Repair

Every clean BGA joint starts with flux that behaves the same way on the first pad and the fortieth. The YCS Halogen Free No Clean Solder Flux Paste 10cc (Milky White) aims at exactly that consistency. A halogen free no clean solder flux paste prepares copper pads, helps molten solder wet the surface, and shields the joint while heat does its work. YCS supplies this paste as a lead-free, halogen-free formula, and distributors position it for mobile phone chips and precision circuits. You get a milky white 10cc paste that covers chip tinning, IC resoldering, and general PCB touch-ups on a professional repair bench. Whether you run a single-technician shop or a multi-bench service center, a flux this predictable removes one variable from every board you touch.

Where This BGA Flux Paste for Mobile Repair Fits the Workflow

Board-level repair follows a repeatable sequence. You diagnose with a multimeter, lift the faulty chip with a hot air station, clean the pads, tin them, and seat the new part. Flux paste enters at the tinning and reflow steps, and it decides how smoothly those steps go. Picture a dead phone with a hardware fault: a charging issue, a display problem, or a network issue that traces back to a failing IC. You brush a thin layer of paste across the pads, tin them with your soldering station, and reflow the replacement chip. The paste’s solder-insulating behavior helps keep joints from bridging into short circuits, and the low smoke output keeps your view clear under the microscope. That combination matters most on fine-pitch BGA footprints, where one bridged row sends the whole board back to the diagnostic stage. On BGA-package memory work such as eMMC, the same paste prepares pads before you reball and refit the chip.

Lead-Free and Halogen-Free Formulation Explained

Most phone boards leave the factory with lead-free solder, so a lead-free flux paste matches the process you already run. The halogen-free label means the paste leaves out halogen-based activators, a specification buyers use to compare flux grades. The no-clean label means the formula removes the need for a dedicated cleaning step after every joint. Experienced technicians still wipe visible residue from a board with isopropyl alcohol before final inspection, particularly around connectors and test points. The paste carries good flow stability, so it spreads evenly across pads instead of wandering into neighboring components. That behavior suits precision circuits, where flux placement controls how clean the finished solder joint turns out. YCS offers the milky white version alongside a transparent option, so you can pick the appearance that reads better against your board and your lighting.

Bench Handling and Buying Notes for Repair Shops

Apply a thin, even layer. A small amount does the job, and extra paste only wastes product and clutters the pads. Keep a reballing kit and a PCB holder next to the board so the work stays steady while the paste is active, and close the cap tightly between jobs to protect the remaining paste. Match this flux to your hot air station and soldering station settings instead of raising heat to compensate for poor coverage, and note the settings that work for each board type so repeat jobs stay consistent. For a shop that handles several boards a day, this YCS flux paste 10cc gives you a manageable unit to keep at each bench, and a spare in stock prevents a job from stalling mid-repair. Mechanicpk supplies the full workflow around this paste, from ISP pinout tools and test boxes to microscopes and multimeters, so you can stock every step of IC-level repair from one source.

Additional information
Weight0.10 kg
Q & A
Please login to post questions

Key Features

  • Halogen-free flux formula
  • Lead-free formulation for modern phone board soldering
  • No-clean formula that skips the heavy cleanup routine
  • Milky white paste for easy visibility on pads
  • 10cc capacity for daily bench use
  • Solder insulation that helps prevent short circuits
  • Low smoke output while soldering
  • Stable flow for even coverage on precision circuits

Specifications

BrandYCS
CategorySoldering Flux Paste
CompatibilityUniversal soldering consumable, not device-specific
TechnologyHalogen-free, lead-free no-clean flux paste
Capacity10cc
ColorMilky White

Common Repair Uses

  • Tinning and soldering workflows on phone and PC boards.
  • BGA chip tinning
  • Mobile phone chip soldering
  • IC resoldering after chip replacement
  • Pad tinning after chip removal
  • Reflow-assisted chip fitting with a hot air station
  • PCB touch-up soldering on precision circuits

Compatible Devices

  • Universal flux consumable, not device-specific. Verified application scope covers mobile phone, computer/PC, and precision PCB circuit boards with BGA chips.
  • Mobile phone motherboards and logic boards
  • Mobile phone chips (CPU and IC packages)
  • BGA chips on phone boards
  • BGA chips on computer and PC motherboards
  • Precision PCB circuit boards

FAQ

What is the product name?
The product name is YCS Halogen Free No Clean Solder Flux Paste 10cc (Milky White).
What is the brand of this product?
The brand of this product is YCS.
What size does this flux paste come in?
This flux paste comes in a 10cc size.
What is this product used for?
This product is used for BGA chip tinning, mobile phone chip soldering, and precision PCB soldering.
Which devices are compatible with this product?
This product is a universal soldering consumable for mobile phone boards, computer and PC boards, and BGA chips, and it is not device-specific.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Can I use this flux paste for BGA chip tinning on mobile phone boards?
Yes. YCS lists this flux for tinning and soldering BGA chips on mobile phone and PC boards, and it supports precision circuit work.
Do I need to clean the board after using this no-clean flux paste?
The no-clean formula does not require a dedicated cleaning step after soldering. Many technicians still wipe visible residue with isopropyl alcohol before final inspection.