Mechanic MK1 Universal Rotary Fixture for Phone PCB
₨ 4,800
Rotary PCB Fixture for Mobile Repair
Mechanic MK1 Universal Rotary Fixture clamps and rotates mobile phone motherboards and chips for stable board-level repair. Its 50mm self-centering clamping stroke centers the PCB automatically, while the damped 360-degree turntable lets you reach every side of the board without re-clamping. A high temperature resistant synthetic stone base handles hot air and soldering work, and non-slip silicone feet keep the fixture planted on your bench. Place it on a microscope disc base or desktop for IC removal, BGA reballing, and pad cleaning. This rotary PCB fixture for mobile repair suits technicians, repair shops, and service centers across Pakistan.
In stock
Rotary PCB Fixture for Mobile Repair: Mechanic MK1 Overview
The Mechanic MK1 Universal Rotary Fixture is a rotary PCB fixture for mobile repair that holds a motherboard or a loose chip steady while you rework it from any side. It combines a 50mm clamping stroke, self-centering jaws, and a damped 360-degree turntable on a high temperature resistant synthetic stone base. You stop chasing a sliding board and start working on the fault: a dead phone that needs a power IC change, a charging issue near the connector area, or a hang on logo case that points to the CPU or memory section. Repair shops across Pakistan that run several rework jobs every day use a fixture like this to keep each board in a repeatable position.
Self-Centering Clamp and 360° Rotation
The clamping slider uses positive and negative knobs with hidden screws. Both jaws move together, so the board centers itself between them. You turn the knob once and the PCB stays in the middle of the base instead of drifting to one side. The 50mm stroke accepts various motherboards and chips, and the jaws grip irregularly shaped boards more securely than a flat vise does.
A built-in rotary bearing and a damping turntable let you spin the board through a full 360 degrees. The damping holds the angle you pick, so you turn the board to reach a connector, a shield edge, or a BGA chip from the side you want, and it stays there while you work. You adjust the angle with one hand and keep the other on your iron or hot air nozzle.
Where the MK1 Fits in Your Repair Workflow
Board-level repair has many small steps, and a fixture supports nearly all of them. You clamp the board before you lift a shield, clean pads, apply flux, remove a chip with a hot air station, and place the replacement. Pair the MK1 with a soldering station for pad cleaning, a reballing kit for BGA work, and a multimeter to check rails and shorts after the rework. A microscope sits well with this fixture, because the base fits on a microscope disc base and gives you a stable board under magnification.
The same stability helps in software-side hardware jobs. When you connect pinout probes or adapters from your eMMC programmer, ISP pinout tool, UFS adapter, or test box setup to a board, a clamped PCB keeps your wires and probes in place. You avoid a shifted board that breaks a thin wire halfway through a read.
Build Quality and Bench Placement
The base uses high temperature resistant synthetic stone, a material that tolerates the heat of hot air rework without warping the way a plastic holder can. Non-slip silicone feet on the bottom grip the bench and keep the fixture from sliding when you turn the knobs or rotate the board. The unit measures 135 x 95 x 30 mm and weighs 334 g net, so it fits on a crowded bench and still feels planted.
You can place the MK1 on a microscope disc base, a desktop, or another workstation. That flexibility matters in a Pakistani repair shop where one bench often serves hot air work, soldering, and inspection in the same hour. Move the fixture to the station you need and clamp the next board in seconds.
Choose the Mechanic MK1 if you want a single-purpose holder with a clear job: grip the board, center it, and rotate it on demand. If you already own a basic PCB holder, the MK1 gives you the self-centering action and the damped rotation your older holder lacks. Browse Mechanicpk’s PCB holders, hot air stations, soldering stations, microscopes, and reballing kits to build a complete board-repair bench around it.
| Weight | 0.45 kg |
|---|
Key Features
- ✓50mm stroke clamping area for various motherboards and chips
- ✓Self-centering clamping with positive and negative knobs and hidden screws
- ✓360-degree rotation for multi-angle access
- ✓Built-in rotary bearing and damping turntable that holds your chosen angle
- ✓High temperature resistant synthetic stone base
- ✓Non-slip silicone feet for bench stability
- ✓Grips irregularly shaped motherboards securely
- ✓Sits on a microscope disc base, desktop, or other workstation
Specifications
| Brand Entity | Mechanic (Qiankun MK1 series) |
|---|---|
| Product Entity | Mechanic MK1 Universal Rotary Fixture |
| Technology Entity | Self-centering clamp, damped 360° rotary turntable, synthetic stone base |
| Compatible Device Entities | Mobile phone motherboards, PCBs, and standalone chips |
| Repair Process Entity | Board-level soldering, IC rework, BGA reballing |
| Industry Entity | Mobile phone repair, PCB repair, GSM repair workshops |
Common Repair Uses
- ✓IC removal and replacement with a hot air station
- ✓BGA chip rework and reballing
- ✓Board-level soldering and pad cleaning
- ✓Microscope inspection of the PCB
- ✓Holding the board steady while you attach test or programming probes
- ✓Multi-angle access for dead phone and charging issue repairs
Compatible Devices
- ✓Universal, not device-specific. It holds any board or chip that fits the 50mm clamping stroke.
- ✓Mobile phone motherboards within the 50mm clamping stroke
- ✓Irregularly shaped motherboards
- ✓Standalone chips and ICs within the clamping range
- ✓Tablet and small electronics PCBs within the clamping range
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
What is the maximum clamping range of the Mechanic MK1 fixture?
Does the Mechanic MK1 center the board automatically, and can it sit on a microscope base?
Related products
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock



