2UUL DK01 Steady Dock Anti-Fatigus Wrist Rest Pakistan
₨ 2,500
Anti-Fatigue Wrist Rest for Mobile Repair
The 2UUL DK01 Steady Dock Anti-Fatigus Wrist Rest for Repair Work (2Pcs/Set) gives your hands a fixed support point at the bench. The set includes one left and one right rest, each built from resilient silicone with a leather-textured surface and an anti-slip base. This anti-fatigue wrist rest for mobile repair lifts your forearms off the hard bench edge, so your hands stay steadier during microsoldering, IC rework, and screen work under the microscope. At 141 x 86 x 47 mm, the pair fits beside your soldering station, microscope, or PCB holder on a crowded technician bench.
In stock
Anti-Fatigue Wrist Rest for Mobile Repair Built for Steady Bench Work
The 2UUL DK01 Steady Dock Anti-Fatigus Wrist Rest for Repair Work (2Pcs/Set) is an anti-fatigue wrist rest for mobile repair that targets the most common weakness at a technician’s bench: unsupported hands. When you hold tweezers, a soldering iron, or a hot air nozzle over a dense mainboard, every small wrist shake travels straight to the tool tip. 2UUL built the DK01 as a left and right pair of silicone docks, so each hand gets a fixed resting point and your fingers handle the precision movement instead of your whole forearm. Continuous pressure from a hard bench edge is a known source of forearm fatigue, and the pair takes that pressure off during long sessions. Mechanicpk supplies it to technicians across Pakistan who spend hours under a microscope.
Silicone Build and Surface Design
Each dock uses a resilient silicone structure topped with a leather-textured surface. The silicone absorbs pressure from your wrist and forearm and keeps its supportive shape through repeated use, which matters when you rest on the same spot for a full shift. The leather texture feels comfortable against bare skin during long sessions. The base carries an anti-slip finish that holds the dock in place on the bench, so your hand position stays consistent from one repair to the next. The docks measure 141 x 86 x 47 mm and the listed net weight is 288 g, which keeps them compact enough to sit between your soldering station and your microscope without crowding the bench. The two-piece set covers both hands, so the right dock supports your tool hand while the left dock supports the hand that positions the board or holds the tweezers.
Where the Dock Fits in Your Repair Workflow
You use the DK01 in every task where hand stability decides the result. Microsoldering under a microscope, IC replacement on a dead phone, BGA reballing, jumper wire repair on damaged pads, and flex connector work all reward a steady hand. A steadier hand also helps when you tin pads, drag solder across fine-pitch connectors, or place a small component with tweezers. Rest one dock under each wrist and your fingers hold a tweezer or a soldering iron at the exact angle you need for longer, with less fatigue building in the forearm. The set also supports screen separation and charging port repair, where you apply slow, controlled pressure with a hand tool. Boards that come back dead after flash and need an eMMC reball or a power IC swap also run long, and the dock keeps your hands fresh at the end of the job. Pair the docks with a PCB holder to lock the board and with a hot air station for controlled rework, and the board, the tool, and your hands all stay still.
Choosing the DK01 for Your Bench
The DK01 is a passive bench accessory, so it needs no power, drivers, or software and works with any soldering station, hot air station, or microscope you already own. It is universal, not tied to a phone model or chipset, which makes it a practical add-on for shops that repair Samsung, Oppo, Vivo, Infinix, Tecno, and iPhone boards on the same bench. The left and right pairing covers one technician fully, so a service center with several repair stations buys one set per bench. If you are building a workshop from the ground up, start with a microscope and a soldering station, then add the DK01 pair and a reballing kit to complete a stable, repeatable microsoldering workflow. Mechanicpk lists the 2UUL DK01 under repair tools and accessories, so you can add it to the same order as your soldering consumables and PCB accessories. You get a low-cost upgrade that protects your wrists and improves the steadiness of every fine repair.
| Weight | 0.5 kg |
|---|
Key Features
- ✓Left and right 2-piece set that supports both hands
- ✓Resilient silicone structure that holds its supportive shape
- ✓Leather-textured surface for comfortable wrist contact
- ✓Anti-slip base that keeps the dock steady on the bench
- ✓Ergonomic forearm support that removes the need for unsupported wrists
- ✓Steadies hand movement during precision repairs
- ✓Compact 141 x 86 x 47 mm size for crowded repair benches
- ✓Passive design with no power, drivers, or software needed
Specifications
| Brand Entity | 2UUL |
|---|---|
| Product Entity | 2UUL DK01 Steady Dock Anti-Fatigue Wrist Rest |
| Technology Entity | Resilient silicone dock with leather-textured surface and anti-slip base |
| Compatible Device Entities | Universal bench accessory for smartphone, iPhone, tablet, and electronics PCB repair |
| Repair Process Entity | Microsoldering, IC rework, BGA reballing, screen separation |
| Industry Entity | Mobile phone repair and PCB repair workshops in Pakistan |
Common Repair Uses
- ✓Hand-steadying support for precision bench work
- ✓Microsoldering under a microscope
- ✓IC replacement and rework
- ✓BGA reballing
- ✓Jumper wire repair on damaged pads
- ✓Flex connector soldering
- ✓Charging port repair
- ✓Screen separation with hand tools
- ✓Long board diagnostics and component placement with tweezers
Compatible Devices
- ✓Universal bench accessory, not device-specific
- ✓Smartphone mainboards from any brand, including Samsung, Oppo, Vivo, Infinix, and Tecno
- ✓iPhone logic boards
- ✓Tablet mainboards
- ✓Smartwatch and wearable boards
- ✓Small electronics PCBs
- ✓Phone screens and back glass during separation
- ✓Battery and flex cable work
- ✓Camera module and connector repair
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
What are the dimensions and weight of the 2UUL DK01 wrist rest?
Does the DK01 wrist rest slip on the bench during microsoldering?
Related products
JZQ-599B Soldering Iron Tip Cleaner with Tin Cleaning Ball
Out of stock



