2UUL SC19 Mr. Flux 100 for PCB Repair 100g
₨ 2,600
No-Clean BGA Flux Paste, 100g
2UUL SC19 Mr. Flux 100 for PCB Repair 100g gives your bench a no-clean, halogen-free flux paste for BGA chip soldering on mobile phone motherboards. The viscous formula wets pads well, holds ICs in place during heating, and resists oxidation, so you reflow and rework without chip displacement. The 100g pack suits workshops that burn through flux daily, and it pairs with your hot air station, soldering iron, and reballing stencils. If you want the best flux paste for mobile repair in a bulk size, Mechanicpk stocks it for technicians and service centers across Pakistan.
In stock
Best Flux Paste for Mobile Repair: 2UUL SC19 Mr. Flux 100 (100g)
The 2UUL SC19 Mr. Flux 100 for PCB Repair 100g is a no-clean, halogen-free flux paste that targets BGA chip soldering on mobile phone motherboards. When technicians search for the best flux paste for mobile repair, they judge three things: wetting, oxidation control, and how well the paste holds a chip before heat reaches it. This 2UUL formula covers all three in a 100g pack sized for daily workshop volume. Whether you handle a dead phone with a suspect CPU, a charging issue traced to a PMIC, or a routine IC change karna job, the flux you choose decides how clean the joint comes out and how often the same board returns to your bench.
Formulation and Technical Profile
SC19 uses a thick, viscous consistency with good wetting behavior, so the paste stays where you place it instead of running across the board. The formula carries an anti-oxidation action. Pads and solder balls stay receptive to solder while temperature climbs, which matters most on lead-free boards that demand higher reflow heat. Suppliers list the flux as no-clean and halogen-free, so you leave minimal residue after reflow and keep halogen content out of your repair chemistry.
The 100g net weight places SC19 in the bulk tier of the 2UUL flux range, which also includes the 10cc SC11 and SC17 syringes. Because SC19 is a paste and not a thin liquid flux, it suits BGA and IC work where the flux has to grip the chip and pad area while you position and heat the part.
Where It Fits in the Board-Level Workflow
Apply a thin, even layer of SC19 to the pads before you place or reball a BGA chip, then bring heat with a hot air station or preheater. Keep the layer thin. Excess paste boils under the chip and pushes the part around, while a controlled layer lets the solder collapse and align on its own. Reballing kits, stencils, and PCB holders pair with the paste at this stage, and a microscope lets you inspect ball collapse and pad coverage once the board cools.
On a dead phone that needs a CPU or eMMC reflow, the paste keeps the IC steady while the board heats, which helps when you work without a fixture. Hardware fault jobs also lean on it. When a charging issue comes from lifted pads or broken tracks, you tin the pad with a soldering station, run a jumper wire, and flow the joint with a small dab of flux. After soldering, check continuity with a multimeter. When you reball an eMMC or UFS chip before a reflash, the same flux prepares the pads, and your eMMC programmers, UFS adapters, ISP pinout tools, and test boxes take over for the software side. That sequence keeps hardware and software stages connected on a single bench.
Choosing the 100g Pack for Workshop Volume
A shop that reflows several boards a day empties 10cc syringes fast. The 100g pack covers a full month of regular IC work for a single technician and puts the same flux on every bench, which gives consistent joints across your team. Store the pack closed and away from heat. Transfer small amounts into a syringe or dispenser for fine-pitch work, and the main pack stays clean and workable.
Training institutes benefit from the same logic. Students practicing reballing and pad repair use flux quickly, and a bulk pack keeps practice sessions running without constant reordering. Mechanicpk supplies 2UUL SC19 Mr. Flux 100 to individual technicians, service centers, and institutes across Pakistan, alongside the hot air stations, soldering stations, reballing kits, PCB holders, and microscopes that complete a board-level repair setup.
| Weight | 0.100 kg |
|---|
Key Features
- ✓Viscous paste formula that stays in place on pads
- ✓Good wetting properties for smooth solder flow
- ✓Anti-oxidation action during heating
- ✓No-clean formula with minimal residue
- ✓Halogen-free formulation
- ✓Holds ICs steady for soldering without displacement
- ✓100g bulk pack for daily workshop use
- ✓Suited to BGA chip soldering on mobile phone motherboards
Specifications
| Brand | 2UUL |
|---|---|
| Model | SC19 Mr. Flux 100 |
| Category | Soldering Flux Paste |
| Compatibility | BGA chips and IC pads on mobile phone motherboards, tablets, and electronic circuit boards |
| Supported Devices | Mobile phones and tablets (universal, not device-specific) |
| Technology | No-clean, halogen-free, anti-oxidation flux paste |
| Weight | 100g net |
Common Repair Uses
- ✓BGA chip reflow on dead phone boards
- ✓IC change karna on mobile motherboards
- ✓Pad preparation before reballing
- ✓Pad tinning and cleanup with a soldering iron
- ✓Jumper lagana on broken tracks
- ✓eMMC and UFS chip reballing before a reflash
- ✓Charging IC and connector pad repair
- ✓Reballing and rework practice in technician training
Compatible Devices
- ✓Universal flux paste for any phone or tablet board you solder, not limited to specific brands or models
- ✓Mobile phone motherboards (Samsung, Oppo, Vivo, Infinix, Tecno, iPhone, and other brands, since the flux is not device-specific)
- ✓Tablet motherboards
- ✓BGA CPU chips on phone boards
- ✓BGA eMMC and UFS memory chips
- ✓PMIC and charging IC pads
- ✓Audio and network IC pads
- ✓FPC and connector pads
- ✓General electronic circuit boards
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Does 2UUL SC19 Mr. Flux 100 need cleaning after soldering?
Can I use 2UUL SC19 flux paste for BGA reflow and reballing on mobile motherboards?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock



