2UUL ST83 Heat Resisting Silicone Pad 400x280mm Gray
₨ 1
2UUL ST83 Silicone Repair Mat
The 2UUL ST83 is a heat resistant silicone mat for mobile repair. It measures 400 x 280 mm and insulates heat up to 500°C. The anti-dust coating keeps the grey surface cleaner during board-level work, and the soft, absorbent top protects your bench and your soldering tip during hot air and iron sessions. Technicians in Pakistan use it under hot air stations, soldering stations and PCB holders for IC change karna, reballing and charging port jobs. The corrosion-resistant silicone wipes clean with banana oil or panel cleaner, so flux and residue come off between repairs.
Out of stock
Heat Resistant Silicone Mat for Mobile Repair Benches
A heat resistant silicone mat for mobile repair does more than cover a table. The 2UUL ST83 gives you a defined 400 x 280 mm work zone where hot air, soldering irons and freshly heated boards rest without scorching your bench. 2UUL makes the ST83 from silicone that insulates heat up to 500°C. A surface treatment sold as an anti-dust coating helps keep fine debris off the mat during board-level work. If your shop runs a hot air station and a soldering station every day, this pad absorbs the heat and flux that would otherwise mark your counter.
Technical Highlights of the ST83 Silicone Pad
The ST83 measures 400 x 280 mm, which leaves room for a mainboard, a PCB holder and a small tray of screws side by side. The body uses high-grade silicone that resists corrosion, so flux, IPA and cleaning agents do not break the surface down. The top absorbs stray solder and protects your iron tip when you rest it, and the soft texture holds boards without scratching them. The 500°C rating keeps routine IC removal and reflow temperatures comfortably inside the pad’s limit. Cleaning takes one wipe with banana oil or a panel cleaner, which lifts flux residue and sticky marks between jobs. You can position the pad under a microscope or beside a hot air station and keep one clean zone for every board.
Where the Pad Fits in Your Repair Workflow
Every dead phone, charging issue or hang on logo fault that reaches your bench ends up as a hardware fault on a bare board, and that board needs a safe place to sit. Lay the mainboard on the ST83 before you start IC change karna with a hot air station, before you reball a BGA chip, or before you run a jumper lagana fix on a damaged track. The mat keeps heat off your bench top and gives you one clean place to stage screws and flex cables. During eMMC or UFS work, the same surface holds your ISP pinout board, adapter and test points while you solder fine wires. Pair it with a multimeter for continuity checks, a test box for software jobs and a microscope for inspection, and the whole repair sequence stays on one surface. The listing data for the ST83 confirms heat resistance and an anti-dust coating. It does not state an ESD rating, so keep your wrist strap on for static-sensitive boards.
Why Technicians Choose a Dedicated Silicone Pad
Many benches still use a folded cloth, a cardboard sheet or bare laminate under the hot air gun. Those surfaces scorch, soak up flux and shed lint onto the board. A dedicated silicone pad is a small purchase next to the bench damage it prevents, and it gives every technician in a service centre the same clean starting point for each job. Repair counters in Pakistan’s mobile markets run tight, and a 400 x 280 mm pad fits most bench layouts without crowding your tools. For shop owners, the ST83 works as a standard-issue accessory: buy one per bench, wipe it each evening and replace it when the surface wears out. If you are building a full setup, start with the pad, then add a hot air station, a soldering station, PCB holders and a reballing kit as your workload grows.
| Weight | 0.65 kg |
|---|
Key Features
- ✓Insulates heat up to 500°C
- ✓400 x 280 mm working surface
- ✓Anti-dust coating
- ✓Absorbent surface that protects the solder tip and workbench
- ✓Corrosion-resistant high-grade silicone
- ✓Soft texture that holds boards without scratching
- ✓Cleans with banana oil or panel cleaner
- ✓Grey finish
Specifications
| Brand | 2UUL |
|---|---|
| Model | ST83 |
| Category | Silicone Repair Mats / Mobile Repair Accessories |
| Compatibility | Universal work surface, not device-specific |
| Supported Devices | Universal, not device-specific |
| Technology | Heat-resistant silicone with anti-dust coating |
| Material | Silicone |
| Dimensions | 400 x 280 mm |
Common Repair Uses
- ✓Supporting boards during IC change karna with hot air
- ✓Reballing BGA chips
- ✓Charging port and charging IC repair
- ✓Display problem and flex connector repair
- ✓eMMC and UFS ISP wire soldering on dead phones
- ✓Jumper lagana on damaged tracks
- ✓Board cleaning with IPA and flux removal
- ✓Staging screws, shields and small parts at the bench
Compatible Devices
- ✓Universal work surface for any phone board, not tied to a specific model or chipset
- ✓Android mainboards (Samsung, Oppo, Vivo, Infinix, Tecno and similar brands)
- ✓iPhone logic boards
- ✓Qualcomm and MediaTek based boards
- ✓Tablet and smartwatch boards
- ✓Detached LCD and flex assemblies
- ✓Standalone ICs, eMMC and UFS chips during rework
- ✓Hot air stations and soldering stations
- ✓PCB holders and ISP pinout boards
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
What temperature can the 2UUL ST83 silicone pad handle?
Is the 2UUL ST83 an ESD anti-static mat?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock
JZQ-599B Soldering Iron Tip Cleaner with Tin Cleaning Ball
Out of stock
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock
Qianli 011 16-in-1 Glue Removal Knife for Mobile Repair
Out of stock



