Relife RL-044 XM10 Stencil for Snapdragon 855/730 Reballing
₨ 599
Relife RL-044 XM10 Reballing Stencil
The Relife RL-044 XM10 stencil gives you a 0.12 mm stainless steel template for reballing Qualcomm Snapdragon 855 (SM8150), 730 (SM7150) and 710 CPUs on Redmi K20, K20 Pro and Xiaomi Mi 9 boards. You align the aperture layout over the cleaned CPU pads, push solder through the holes, and reflow with your hot air station to rebuild an even ball array. The stencil fits technicians who handle a dead phone, boot loop issue or hang on logo fault that traces back to a lifted or damaged CPU. Order the XM10 on its own when you service these Xiaomi boards and do not need the full RL-044 set.
In stock
Relife RL-044 XM10 Stencil for Snapdragon 855 and 730 CPU Reballing
The Relife RL-044 XM10 stencil does one job well: it rebuilds the solder ball array on Qualcomm Snapdragon CPUs from the SM8150 and SM7150 family. Relife numbers every stencil in the RL-044 range by pad layout, and XM10 covers the Snapdragon 855 (SM8150), Snapdragon 730 (SM7150) and Snapdragon 710 platforms inside the Redmi K20, Redmi K20 Pro and Xiaomi Mi 9. Your bench sees these boards after water damage, hard drops and failed reflow attempts, and a matched template turns a risky reball into a repeatable process. Mechanicpk supplies the XM10 for technicians who prefer exact chipset-to-stencil matching over a universal grid. The number in the name points to a pad layout, not to a single phone model, so you pick the stencil by the chip on the board.
Snapdragon 855 BGA Reballing Stencil: Chipset Coverage and Matching
Matching the stencil to the CPU code decides whether the reball works. The XM10 listing names the Snapdragon 855 (SM8150) alongside the Snapdragon 730 (SM7150) and 710. Read the marking on the lifted CPU, then confirm it against those codes before you load any solder. Trust the CPU marking over the phone name, because one platform often appears across several models. Snapdragon 845 boards in the Mi 8, Mi 8 SE and Mix 2S belong to the neighbouring XM9 stencil, and Snapdragon 888 boards fall outside the XM10 listing, so check the full XM range whenever your workshop handles mixed Xiaomi models. Keep a note of the CPU code next to each repair ticket, so your next Redmi K20 or Mi 9 job pulls the right stencil in seconds. This page covers XM10 only, which keeps your stock clean when you service just these Qualcomm platforms.
Build Quality and Bench Handling
Relife cuts the RL-044 range from stainless steel at roughly 0.12 mm thickness, and the steel keeps its shape under hot air instead of warping. A flat template matters because a bowed stencil lets solder bridge between neighbouring pads. Start with a clean board: remove the CPU with your hot air station, clear old solder with flux and wick, and wipe the pads with a suitable cleaner. Clamp the board in a PCB holder, set the stencil over the pads under your microscope, and check that every aperture lines up with its pad before you apply solder. Heat the paste or balls gently until they ball up, let the board cool, then lift the stencil straight up so the new balls stay in place. Between jobs, wipe flux residue off the stencil with isopropyl alcohol and store it flat so the apertures stay clear and the steel stays straight. Inspect the hole walls under magnification before every reball, because a clogged aperture leaves a missing ball and sends you back to square one with a hardware fault you caused yourself.
Where XM10 Fits in Your Xiaomi Repair Workflow
Reach for XM10 once diagnosis points at the CPU. Start with a multimeter check on the main power rails of a dead phone, then confirm the fault with the board under the microscope. A boot loop issue or hang on logo fault that survives a reflash can trace back to cracked CPU solder joints, and that is where CPU reballing earns its place. Pair the stencil with a Reballing Kit for paste and solder balls, a Soldering Station for pad prep, and a Hot Air Station with stable airflow control. A spare XM10 on your bench keeps a mid-day CPU job moving instead of waiting on a stencil order. When the same Xiaomi board also needs storage work, move on to your ISP Pinout Tools, eMMC Programmers or UFS Adapters in the same session. Technicians who outgrow single stencils can step up to the full RL-044 XM series set and cover every Xiaomi platform from one case.
| Weight | 0.1 kg |
|---|
Key Features
- ✓0.12 mm stainless steel template that resists warping under hot air
- ✓Pad layout matched to Qualcomm Snapdragon 855 (SM8150), 730 (SM7150) and 710 CPUs
- ✓Part of the Relife RL-044 XM series, numbered by pad layout
- ✓Covers Redmi K20, Redmi K20 Pro and Xiaomi Mi 9 boards
- ✓Precise aperture alignment for even solder ball placement
- ✓Suits solder paste or ball reballing with a hot air station
- ✓Works with PCB holders and microscope setups for clean pad alignment
- ✓Sold as a single XM10 stencil for targeted Xiaomi CPU work
Specifications
| Brand | Relife |
|---|---|
| Model | RL-044 XM10 |
| Category | BGA Reballing Stencil |
| Compatibility | Qualcomm Snapdragon 855 (SM8150), Snapdragon 730 (SM7150), Snapdragon 710 |
| Supported Devices | Redmi K20, Redmi K20 Pro, Xiaomi Mi 9 |
| Technology | BGA tin planting (solder ball) stencil |
| Material | Stainless steel |
Common Repair Uses
- ✓CPU reballing on Xiaomi and Redmi Snapdragon boards
- ✓Reballing a Snapdragon 855 CPU after hot air removal
- ✓Reballing a Snapdragon 730 (SM7150) CPU on Redmi K20 boards
- ✓Rebuilding the ball array after a CPU lifts during a drop or water damage repair
- ✓Dead phone CPU repair after a failed reflow attempt
- ✓Boot loop issue or hang on logo repair traced to damaged CPU solder joints
- ✓Re-tinning CPU pads with solder paste before refitting the chip
Compatible Devices
- ✓Xiaomi and Redmi boards with Qualcomm Snapdragon 855 / 730 / 710 CPUs
- ✓Redmi K20
- ✓Redmi K20 Pro
- ✓Xiaomi Mi 9
- ✓Qualcomm Snapdragon 855 (SM8150) CPU boards
- ✓Qualcomm Snapdragon 730 (SM7150) CPU boards
- ✓Qualcomm Snapdragon 710 CPU boards
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Which Snapdragon chips does the RL-044 XM10 stencil support?
Can I use the XM10 stencil on a Snapdragon 888 or Snapdragon 845 Xiaomi board?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock



