Qianli Bumblebee QS24 Samsung Exynos CPU3 Stencil

₨ 799

Qianli QS24 Stencil for Samsung Exynos CPU Reballing

The Qianli QS24 Exynos CPU3 reballing stencil gives your Samsung CPU rework one template for Exynos 9810, 9820, 980, 7880, 7580, 3470, 7570 and 3475. It belongs to Qianli’s Bumblebee series and uses square holes with rounded corners to place solder balls cleanly on the processor pads after removal. Technicians reach for it on hardware fault boards, dead phone cases and hang on logo jobs where the CPU needs a reball. Check your board’s chipset marking against the supported list, and the QS24 covers the reball step of your Exynos repair.

In stock

19 People watching this product now!
Description

Qianli QS24 Exynos CPU3 Reballing Stencil for Samsung CPU Rework

The Qianli QS24 Exynos CPU3 reballing stencil covers eight Samsung Exynos processor families with one template: Exynos 9810, 9820, 980, 7880, 7580, 3470, 7570 and 3475. Qianli builds it as part of the Bumblebee series, which uses square holes with rounded corners. If your bench takes in Samsung boards with a lifted, replaced or damaged CPU, this stencil handles the reball step for all eight chipsets. You stop hunting for a separate template every time a new Exynos board lands on your table.

Why the QS24 Fits an Exynos Rework Workflow

Samsung boards reach a repair bench with a few typical symptoms: a dead phone after a drop, a boot loop issue that survives reflashing, or a hang on logo that points to a CPU solder fault. Once you confirm the fault at board level and lift the processor, you clean the pads and reball the CPU. The QS24 gives you a fixed, repeatable pattern for that last step, so every ball lands in the same position and your reflow starts from a clean footprint. You work from the chipset marking on the processor, not from the phone name, and that habit keeps your template choice accurate.

Square-Hole Design and Reball Quality

Qianli describes the Bumblebee series as square holes with rounded corners. Square apertures give the solder paste or ball more contact area than a plain round opening, and the rounded corners help the material release from the template. You get a stencil that suits your direct-heat reballing routine and holds its shape across repeated jobs. Qianli also markets these stencils as sturdy, precise and durable over time. Keep the template flat, clean it with flux remover after each use and store it away from bent edges, because a warped stencil ruins ball alignment faster than any technique error.

Where It Sits in Your Repair Chain

The stencil does one job inside a larger CPU rework chain. Your hot air station or preheater lifts the processor, your microscope checks pad condition, and your soldering station and flux clean the pads. The QS24 then defines the new ball layout before you reflow the CPU back onto the board. A PCB holder keeps the board steady during that step, and a reballing kit supplies the paste or balls. Technicians who outgrow single-purpose stencils often add a multi-pitch universal template later, and the QS24 stays useful as the dedicated, faster choice for Exynos CPU3 chipsets.

Choosing the Right Exynos Stencil Group

Qianli splits its Samsung Exynos coverage across numbered stencils. The QS22 covers the Exynos CPU1 group (5430, 8890, 8895), the QS23 covers the CPU2 group (990, 7885, 9610, 7420) and the QS24 covers the CPU3 group listed above. Read the marking on the processor first, then match it to the stencil group. Ordering by phone model alone risks buying the wrong template, because Samsung ships the same model with different chipsets in different regions. Match the chipset, and the QS24 slots into your Samsung reball routine without rework.

Additional information
Weight0.1 kg
Q & A
Please login to post questions

Key Features

  • One stencil covers eight Samsung Exynos CPU families
  • Part of Qianli’s Bumblebee series
  • Square holes with rounded corners
  • Built to hold precision over repeated reballing jobs
  • Fits a direct-heat reballing workflow
  • Clear Exynos CPU3 group labeling (QS24)
  • Pairs with reballing kits, flux and preheaters
  • Suits repair shops, service centers and training institutes

Specifications

BrandQianli
ModelQS24
CategoryBGA Reballing Stencil
CompatibilitySamsung Exynos CPU3 group
Supported DevicesSamsung Exynos 9810, 9820, 980, 7880, 7580, 3470, 7570, 3475 CPUs
TechnologySquare holes with rounded corners (Bumblebee series)

Common Repair Uses

  • Reballing Samsung Exynos CPUs after removal from the board
  • Reballing an Exynos CPU after hot air removal
  • Reballing a replacement CPU before refitting on a dead phone board
  • Repairing hang on logo faults caused by CPU solder joint failure
  • Repairing boot loop issue cases traced to a cracked CPU ball
  • Restoring boards that died after a drop or impact
  • Cleaning and rebuilding ball grids on a lifted processor
  • Rework in a service center handling mixed Samsung Exynos boards
  • Training technicians on direct-heat BGA reballing

Compatible Devices

  • Samsung Exynos CPU3 group, chipset-level compatibility (match the processor marking, not the phone model name)
  • Exynos 9810 (Galaxy S9 and Note 9 Exynos variants)
  • Exynos 9820 (Galaxy S10 Exynos variants)
  • Exynos 980
  • Exynos 7880 (Galaxy A5 and A7 2017 Exynos variants)
  • Exynos 7580
  • Exynos 3470
  • Exynos 7570
  • Exynos 3475

FAQ

What is the product name?
The product name is Qianli Bumblebee Stencil (QS24) Samsung Exynos CPU3.
What is the brand of this product?
The brand of this product is Qianli.
What is the model of this product?
The model of this product is QS24.
What is this product used for?
This product is used for reballing Samsung Exynos CPUs during board-level mobile repair.
Which devices are compatible with this product?
This product is compatible with Samsung phones using Exynos 9810, 9820, 980, 7880, 7580, 3470, 7570 and 3475 processors.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Which Exynos chipsets does the Qianli QS24 support?
The QS24 supports Exynos 9810, 9820, 980, 7880, 7580, 3470, 7570 and 3475.
Can the QS24 reball Exynos 990 or Exynos 8890?
No. Qianli places Exynos 990 under the QS23 and Exynos 8890 under the QS22, so match the chipset marking to the correct stencil group.