Qianli Bumblebee Stencil (QS71) MAX Series Power
₨ 600
Qianli QS71 BGA Stencil for MAX Power ICs
The Qianli Bumblebee Stencil (QS71) MAX Series Power is a dedicated BGA reballing template for Maxim (MXIM) MAX-series power ICs. It uses square holes with rounded angles, and Qianli builds it from newer materials with an improved surface treatment for added precision and durability. You get a footprint-matched stencil for rebuilding solder balls on a lifted or replaced power IC, so you avoid forcing a universal template onto the job. Mechanicpk stocks it for technicians and service centers across Pakistan who handle IC-level power section repair on a hot air station and want a precise, single-purpose tool.
In stock
Qianli QS71 BGA Stencil for Maxim MAX Series Power ICs
The Qianli Bumblebee Stencil (QS71) MAX Series Power targets one job: reballing Maxim (MXIM) MAX-series power ICs. When a dead phone traces back to a power section hardware fault, this Qianli QS71 BGA stencil gives you a footprint-matched way to rebuild the solder balls on a lifted or replaced chip. Qianli designs the Bumblebee range around square holes with rounded angles, and the QS71 applies that design to the MAX power footprint. Mechanicpk supplies it to technicians who already know their way around hot air rework and want a precise, single-purpose stencil.
Why a Dedicated MAX Series Stencil Matters
Power ICs sit in the path of every charging issue, boot loop issue, and hang on logo complaint that comes from a rail fault. When a MAX-series chip lifts a pad or arrives without balls, a universal stencil forces you to compromise on alignment. A stencil cut for the chip’s own footprint removes that guesswork. You lay it over the cleaned pads, apply your solder medium through the apertures, and reflow with the ball pattern already matched. You still need to confirm the chip marking against the stencil before you start, because the manufacturer identifies the fit by the MAX series and does not publish individual part numbers. That check takes half a minute and saves a damaged pad set.
Square Holes, Rounded Angles, and Build Quality
Qianli describes the Bumblebee stencil line as square holes with rounded angles, and that geometry defines how the template behaves under your tools. Qianli also rates the QS71 as sturdy, precise, and durable over time, and credits a newer treatment and newer materials for making it easier to use and more precise than earlier versions. Those points matter on a workshop bench where one stencil serves many jobs. You want a template that keeps its aperture shape across repeated reballing work. Handle it by the edges, clean it after each use, and store it flat so the apertures stay true for the next board.
Where QS71 Fits in Your Repair Workflow
Start with diagnosis. A digital multimeter and a clean read of the failing rail tell you whether the power IC deserves the blame. Once you confirm the fault, lift the chip with a hot air station, clean the pads with flux and wick under a microscope, and clamp the board in a PCB holder so nothing shifts. Now the QS71 comes in. You align it over the pads, work your solder through the holes, and reflow the chip back into place.
Pair this stencil with the rest of a proper reballing setup. A reballing kit covers solder balls, flux, and tools. A soldering station handles pad touch-ups, and a test box or power supply lets you verify the repair before you close the phone. If your work grows into storage and boot faults, the next step up is the eMMC programmer, ISP pinout tool, and UFS adapter categories, which handle the data side of the same dead phone complaint.
Why Technicians Choose a Single-Purpose Stencil
Repair shops in Pakistan handle power section faults daily, and a stencil that matches one chip family cuts setup time on every job. You pick it up, check the marking, and start work. You do not spend minutes aligning a universal pattern or filling extra apertures. For a shop that reballs MAX-series power ICs often enough to notice the pattern, that speed adds up across a week of boards. For a training institute, the QS71 gives students a clear, repeatable stencil exercise on a real power IC footprint.
| Weight | 0.1 kg |
|---|
Key Features
- ✓Dedicated Bumblebee stencil for Maxim (MXIM) MAX-series power ICs
- ✓Square holes with rounded angles BGA stencil design
- ✓Sturdy build that stays precise and durable over time
- ✓Newer surface treatment from Qianli for easier use
- ✓Newer materials for improved precision
- ✓Single-purpose footprint that removes universal stencil alignment guesswork
- ✓Suits hot air rework and reflow workflows
- ✓Part of Qianli’s Bumblebee stencil range for mobile repair benches
Specifications
| Brand | Qianli |
|---|---|
| Model | QS71 |
| Category | BGA Reballing Stencil (Bumblebee Series) |
| Compatibility | Maxim (MXIM) MAX series power ICs |
| Technology | Square holes with rounded angles BGA stencil |
Common Repair Uses
- ✓Reballing work on MAX-series power ICs in power section repair.
- ✓Reballing a removed MAX-series power IC before refitting
- ✓Reballing a replacement MAX-series power IC that arrives without balls
- ✓Dead phone repair where diagnosis points to the power IC
- ✓Charging issue repair where the power IC pads need reworking
- ✓Boot loop issue or hang on logo cases traced to a power rail fault
- ✓Pad preparation and ball rebuilding after board cleaning
- ✓Hardware fault rework at chip level
- ✓BGA reballing practice for technicians in training
Compatible Devices
- ✓Verified scope is Maxim (MXIM) MAX-series power ICs. The manufacturer does not publish device-level model lists.
- ✓Maxim (MXIM) MAX-series power ICs
- ✓Logic boards that carry a MAX-series power IC
- ✓Brand-independent fit: the IC on the board decides compatibility, not the phone brand
- ✓Chip marking check against the stencil footprint before use
- ✓Power section reballing of MAX-series chips
- ✓IC-level repair benches in mobile repair shops
- ✓Service center rework stations with hot air equipment
- ✓Technical training exercises on BGA reballing
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Which ICs does the Qianli QS71 stencil fit?
What hole shape does the QS71 stencil use?
Related products
UFI eMMC BGA Soldering Adapter (8 Footprints) for UFI-Box
In stock



