Amaoe HI1 BGA Reballing Stencil for Huawei Hi Power IC

₨ 599

Huawei Hi Power IC Reballing Stencil

The Amaoe HI1 BGA Reballing Stencil gives you a 0.12mm steel template for reballing Huawei HiSilicon Hi-series power ICs. It covers HI6555, HI6421, HI6553, HI6921, HI6522, HI6523 and related chip versions in a single stencil, so you match the part number and version suffix on your board and reball without improvising a pattern. Use it as a Huawei PMIC reballing stencil on your repair bench for dead phone and charging issue jobs that end at the power IC. Mechanicpk supplies it to technicians, repair shops and service centers across Pakistan that rework Huawei boards at chip level.

In stock

13 People watching this product now!
Description

Huawei PMIC Reballing Stencil for the HiSilicon Hi Power IC Family

The Amaoe HI1 BGA Reballing Stencil is a Huawei PMIC reballing stencil that matches the ball layouts of HiSilicon Hi-series power ICs. A 0.12mm steel sheet carries the apertures for HI6555, HI6421, HI6553, HI6921, HI6522, HI6523 and related variants, so you reball a lifted power IC to its own pattern instead of forcing a universal template to fit. Distributors and workshops that handle Huawei boards stock this stencil for the jobs where a power IC leaves the board and must return with clean, even solder balls. Power ICs in the Hi6xxx range manage charging and supply rails on Huawei boards, so a bad ball under one of them can show up as a dead phone, a charging issue or a hardware fault that no software fix touches. A stencil cut for the exact chip family gives you repeatable ball size and spacing, which matters more here than it does with a loose universal sheet.

Chip Coverage You Can Check Against the Marking

Suppliers list the HI1 coverage by chip and version: HI6555 V1 and V2, HI6421 A V3, HI6421 B V5, V6 and V7, HI6421GFC, HI6553 V1, HI6551 V1, HI6559 V1, HI6921 V1, HI6921M V1, HI6561 V1, HI6422 V2 and V3, HI6423 V1, HI6522 V2, HI6523 V1 and HI6403 V1. Read the marking on your chip and match both the part number and the version suffix against that list before you start, because the supplier lists each version as its own entry. The sheet measures 0.12mm thick, and that thickness sets how much solder each ball receives. The steel holds its shape under hot air, so the apertures stay flat across repeated jobs. If you search for an HI6555 reballing stencil or a stencil for the HI6421 power IC, this single model covers both. Within the Amaoe range, HI1 takes the Huawei power IC slot, next to the CPU-focused HU stencils and the HI2 stencil for IF, Wi-Fi and audio chips.

Where the Stencil Fits in a Power IC Rework

When a dead phone or a charging issue traces back to a hardware fault at the power management chip, the repair runs through reballing. You lift the IC with a hot air station, clean the pads with flux and wick under a microscope, and test the board with a multimeter for a short on the main power line before anything goes back. Wipe flux residue off the chip pads first, because residue under the sheet lifts it off the chip and lets solder bridge between apertures. Seat the chip in a reballing platform, align the HI1 stencil over its pads, fill the apertures with solder paste or balls from your reballing kit, and reflow until the balls form. Keep the hot air nozzle moving and stop as soon as the balls settle, since the chip sits close to other ICs and passives on a Huawei board. Let the stencil cool, lift it clear, and inspect every ball for height and position. Clamp the board in a PCB holder, then place the chip and reflow it. A soldering station handles the leftover pad residue around the chip before you refit.

Pairing and Upgrade Notes for Your Stencil Rack

The HI1 covers Hi-series power ICs only. Hi1101, Hi1102 and Hi1103 chips sit under the separate HI2 stencil, and HiSilicon CPUs such as HI3650, HI3660 and HI6250 sit under the HU series. Check the chip family first, then pick the stencil, because a wrong aperture pattern wastes a chip and a reflow cycle. Wash the stencil in isopropyl alcohol after each job and store it flat so the sheet stays true. A shop that reballs Huawei boards every week saves bench time by keeping HI1 as its Huawei PMIC reballing stencil, with HI2 and the HU stencils in the same rack, instead of searching for a universal sheet each time. Record the chip version on the job ticket so the next technician grabs the correct stencil without re-reading a worn marking.

Additional information
Weight0.1 kg
Q & A
Please login to post questions

Key Features

  • 0.12mm steel sheet for controlled solder ball volume
  • One stencil covers HI6555, HI6421, HI6553, HI6921, HI6522, HI6523 and related versions
  • Version-specific coverage: V2, V3, V5, V6, V7 variants listed by chip
  • Heat-resistant steel that holds its shape under hot-air reballing
  • Chip-specific aperture pattern instead of a universal compromise
  • Sits beside HI2 (IF, Wi-Fi, audio) and HU (CPU) stencils in the Amaoe range
  • Suits hot air station, reballing platform and reballing kit workflows
  • Supplied as 1 x stencil

Specifications

BrandAmaoe
ModelHI1
CategoryBGA Reballing Stencil
CompatibilityHuawei HiSilicon Hi-series power ICs (PMIC)
TechnologyBGA reballing (tin planting) stencil, 0.12mm thickness
MaterialSteel

Common Repair Uses

  • Chip-level reballing of Huawei Hi-series power ICs.
  • Reballing a power IC after hot-air removal
  • Replacing a failed power IC on a dead phone with a hardware fault
  • Power IC replacement on charging issue repairs
  • Reballing a salvaged donor power IC before install
  • Restoring even ball height after pad cleanup
  • Rework after a short is found on the main power line
  • Matching HI6555, HI6421 and HI6553 version variants
  • Bench practice for power IC reballing

Compatible Devices

  • Huawei HiSilicon Hi-series power IC (PMIC) chip family. The stencil is chip-specific, not tied to a verified phone-model list.
  • HI6555 V1 / V2
  • HI6421 A V3 / B V5 / V6 / V7
  • HI6421GFC
  • HI6553 V1 / HI6551 V1 / HI6559 V1
  • HI6921 V1 / HI6921M V1
  • HI6422 V2 / V3 / HI6423 V1
  • HI6561 V1
  • HI6522 V2 / HI6523 V1 / HI6403 V1

FAQ

What is the product name?
The product name is Amaoe HI1 BGA Reballing Stencil.
What is the brand of this product?
The brand of this product is Amaoe.
What is the model of this product?
The model of this product is HI1.
What is this product used for?
This product is used for reballing Huawei HiSilicon Hi-series power ICs (PMIC) with solder balls.
Which devices are compatible with this product?
This product is compatible with the Huawei Hi-series power IC family, including HI6555, HI6421, HI6553, HI6921, HI6522 and HI6523 versions.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Which Huawei power IC versions does the Amaoe HI1 stencil cover?
It covers HI6555 V1/V2, HI6421 A V3/B V5/V6/V7, HI6421GFC, HI6553 V1, HI6551 V1, HI6559 V1, HI6921 V1, HI6921M V1, HI6561 V1, HI6422 V2/V3, HI6423 V1, HI6522 V2, HI6523 V1 and HI6403 V1.
Can I use the Amaoe HI1 stencil for Hi1101 or Hi1102 chips?
No. Suppliers list Hi1101, Hi1102 and Hi1103 under the separate HI2 stencil. HI1 targets the Hi-series power ICs.