One-Stop Soldering Iron 60W | Adjustable Temperature

₨ 450

One-Stop 60W Adjustable Iron

The One-Stop Soldering Iron 60W gives your repair bench a dependable adjustable soldering iron for mobile repair work. A two-core ceramic heating element delivers 60W, and a rotary knob sets the tip anywhere from 200°C to 400°C. You get an ESD-safe build, a 140 cm cable and five extra tips, so you swap a worn tip instead of stopping a job. Use it on connector pads, jumper wires, charging port repair and general PCB rework across Android and iPhone boards. It runs on standard 220V mains, which makes it a practical main or backup iron for any workshop or service center.

In stock

16 People watching this product now!
Description

Adjustable Soldering Iron for Mobile Repair: One-Stop Soldering Iron 60W

The One-Stop Soldering Iron 60W is an adjustable soldering iron for mobile repair benches that need steady heat without the price of a digital station. A two-core ceramic heating element delivers 60W, and a rotary knob sets the working temperature between 200°C and 400°C. Mechanicpk supplies it to technicians across Pakistan who handle daily hardware fault jobs, from charging issue repairs to dead phone diagnosis, and want a straightforward iron that heats fast and holds its setting. The iron runs on 220V AC (±10%, 50Hz), so it plugs into standard local mains without a converter.

How the 60W Ceramic Heater Handles Board Work

Ceramic cores heat quickly and recover quickly when the tip lands on a large copper pad or a shielded connector. The two-core design in this iron brings the tip up to working temperature fast, and the knob lets you match the heat to the joint. Listed specifications put temperature stability at ±2°C in still air with no load and accuracy at ±10°C, so you treat the dial as a close guide and confirm critical settings on a scrap board before you touch a customer’s phone. Drop the setting for flex pads, battery connectors and thin jumper wire. Raise it for ground planes, shield frames and lead-free joints that resist the heat leaded solder tolerates.

The ESD-safe build protects sensitive boards while you work, which matters when you handle logic boards with exposed CPU and PMIC areas. The handle keeps your grip away from the heated section, and the 18.6 cm body and 140 cm cable give you reach across a crowded bench.

ESD Safe Soldering Iron 60W in the Daily Repair Workflow

A 60W iron earns its place at the connector and wire level of mobile phone repair. You replace charging port pads, battery connectors, microphone and speaker contacts, and SIM tray contacts, then restore broken tracks with jumper wire after you clean liquid damage. When a phone goes dead after flash, you check the power rails with a multimeter first, then reflow or bridge the damaged joint with this iron. Boot loop and hang on logo cases that trace back to a cracked joint or a loose connector end on the same bench.

Technicians who run FRP lock and pattern unlock jobs through ISP or test points also use an iron like this to tin pads and solder thin pinout wires before they connect an eMMC programmer or ISP pinout tool. The same iron cleans old solder from pads with desoldering wick before you place a replacement part.

Be clear about its limits. Fine-pitch BGA and CPU work needs a hot air station and a reballing kit, and you inspect those joints under a microscope. Treat this iron as the bench tool for the contact-level and pad-level job, and let the specialist equipment handle the chip-level job.

Where This Iron Sits Beside Your Station, Microscope and Test Gear

Most workshops run more than one iron. This model works well as the second iron next to a full soldering station, or as the first iron for a technician who builds a bench from scratch. Pair it with a multimeter for rail checks, a PCB holder to keep the board steady, a microscope to inspect pads, and a hot air station for IC removal. When your volume grows and you want a numeric temperature readout, the upgrade path leads from this iron to a digital soldering station, and the tips and technique you learned carry over.

The package contains one iron plus five extra tips. Fresh tips keep heat transfer consistent, so you replace a tip when it stops wetting solder instead of turning up the dial to compensate. Set the temperature, let the tip tin properly, and work in short, controlled passes to protect the pads you repair.

If you buy for a repair shop or a training institute, the straightforward knob control keeps the learning curve short for new staff. Everyone sets the same dial, learns the same limits, and produces repeatable joints.

Additional information
Weight0.50 kg
Q & A
Please login to post questions

Key Features

  • 60W power with a two-core ceramic heating element for fast heat-up
  • Rotary knob adjusts temperature from 200°C to 400°C
  • Stated temperature stability of ±2°C in still air with no load
  • ESD-safe build for board-safe work
  • Five extra tips included for quick replacement
  • 18.6 cm iron body with a 140 cm cable for bench reach
  • 220V AC (±10%, 50Hz) operation for standard Pakistani mains
  • Practical main iron for connector, wire and pad-level repair

Specifications

BrandOne-Stop
ModelOne-Stop Soldering Iron 60W
CategorySoldering Irons
CompatibilityUniversal — not device-specific
TechnologyTwo-core ceramic heating element with knob temperature adjustment
Input Voltage220V AC ±10%, 50Hz
Power Rating60W
Temperature Range200–400°C
Temperature Stability±2°C (still air, no load)
Temperature Accuracy±10°C
DimensionsIron length 18.6 cm; cable length 140 cm

Common Repair Uses

  • Pad-level and contact-level soldering on mobile phone and electronics boards
  • Charging port repair after a charging issue
  • Battery connector replacement
  • Jumper wire repair on damaged tracks
  • Soldering ISP and test-point pinout wires
  • Removing old solder from pads with desoldering wick
  • Reflowing cracked joints on dead phone and boot loop faults
  • Microphone, speaker and SIM contact repair
  • Wire and through-hole soldering for general hardware faults

Compatible Devices

  • Universal soldering iron — works on any phone or electronics board you can reach safely; not device-specific
  • Android smartphone mainboards (connector, pad and jumper-wire work)
  • iPhone mainboards (connector, pad and jumper-wire work)
  • Charging port and flex connector pads
  • Battery connector pads
  • ISP and test-point pads for pinout wire soldering
  • Feature phone and keypad phone boards
  • Through-hole components and wire joints
  • General electronics and PCB repair boards

FAQ

What is the product name?
The product name is One-Stop Soldering Iron 60W.
What is the brand of this product?
The brand of this product is One-Stop.
What is the model of this product?
The model of this product is One-Stop Soldering Iron 60W.
What is this product used for?
This product is used for pad-level and connector-level soldering, jumper wire repair and general PCB rework in mobile phone repair.
Which devices are compatible with this product?
This product is a universal soldering iron, so it is not tied to specific phone models. It works on Android and iPhone boards and general electronics boards.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
What temperature range and accuracy does this soldering iron offer?
The knob sets the temperature from 200°C to 400°C. Listed stability is ±2°C in still air with no load, and listed accuracy is ±10°C.
Can this soldering iron handle lead-free solder?
Yes for most common work. Lead-free alloys such as SAC305 melt around 217°C, which sits inside the 200–400°C range, and the 60W ceramic heater recovers quickly on larger pads.