Mechanic HK5090 Clean Wipes (400pcs) Anti-Static Microfiber
₨ 1,000
Anti-Static Wipes for Phone and PCB Cleaning
Mechanic HK5090 Clean Wipes (400pcs) gives your repair bench a bulk supply of 10 x 10 cm anti-static microfiber cloths. The ultra-fine, non-linting weave lifts dust, fingerprints, smudges and flux residue from LCD and OLED displays, touchscreens, optical lenses and bare PCBs without scratching the surface. Use the wipes dry for quick dust removal, or pair them with isopropyl alcohol (IPA) after soldering and hot air rework. The 400-piece pack suits busy repair shops, service centers and training labs that clean boards and screens all day.
Out of stock
Lint-Free Wipes for Mobile Repair: Mechanic HK5090 Overview
Mechanic HK5090 Clean Wipes (400pcs) are lint-free wipes for mobile repair benches, built for the cleaning steps that every screen job and board-level repair demands. Each pack holds 400 individual 10 x 10 cm (4 inch) cloths made from ultra-fine microfiber, so you grab a fresh wipe for every board instead of carrying contamination from one repair to the next. The material is soft, non-abrasive and anti-static, which matters when you work around exposed ICs, connectors and display flex sockets. A dead phone, a display problem or a charging issue usually means solvent, flux and fingers touch the board several times per job. These wipes clear that residue and leave the surface ready for your next step.
Material and Cleaning Performance
The HK5090 uses an ultra-fine, non-linting microfiber weave. That dense structure traps dust and fingerprints instead of pushing them around, and it avoids the loose fibers that tissue paper and cotton leave on a display or solder pad. The soft, non-abrasive surface cleans LCD and OLED glass, optical lenses and bare PCB laminate without scratching. Anti-static behavior reduces the charge a dry cloth builds as it moves across a surface, which gives you a safer wipe around exposed ICs, connectors and flex cable sockets. Use the cloth dry for dust and smudges, or add isopropyl alcohol (IPA) to dissolve flux residue and sticky contamination. The 4-inch square folds into a firm pad that reaches tight spots around shield cans and battery connectors, and you can switch to a clean fold in seconds when one side picks up residue.
Where It Fits in Your Repair Workflow
Cleaning sits at both ends of most repairs. When a charging issue or a hang on logo fault lands on your bench, old flux, dust and corrosion often hide the real problem, so you wipe the board first and inspect the pads and solder joints under your microscope. During rework on a hot air station or soldering station, you clear flux from the surrounding board so burned residue does not mask a cold joint. After an IC change or reballing job, you clean the pads and the area around the chip with IPA and a fresh wipe before you test the board. Before you close a screen repair, you wipe the glass and the display so dust does not sit between the layers. Keep the pack beside your PCB holder and microscope, and a clean wipe stays one reach away.
Why Repair Shops Stock the 400-Piece Pack
A busy repair shop burns through wipes faster than almost any other consumable. The 400-piece pack cuts your reorder frequency and gives every technician a steady supply, so cleaning stays consistent from the first job of the day to the last. Service centers, training institutes and one-person workshops across Pakistan gain from standardizing on one wipe for screens, boards and lenses instead of juggling tissue, cotton buds and rags. Combine these anti-static microfiber wipes with your IPA, soldering station, hot air station and reballing kit, and your bench covers every cleaning step from teardown to final test.
| Weight | 0.5 kg |
|---|
Key Features
- ✓Pack of 400 individual 10 x 10 cm (4 inch) wipes for high-volume bench use
- ✓Ultra-fine microfiber that does not leave lint behind
- ✓Anti-static, soft and non-abrasive texture
- ✓Safe on LCD and OLED screens, touchscreens and optical lenses
- ✓Removes dust, fingerprints, smudges and flux residue
- ✓Works dry or with isopropyl alcohol (IPA)
- ✓Suits bare PCBs, motherboards and electronic components
- ✓Vacuum-sealed bulk pack for repair shops and service centers
Specifications
| Brand | Mechanic |
|---|---|
| Model | HK5090 |
| Category | Cleaning Tools |
| Compatibility | LCD and OLED screens, PCBs, optical lenses, electronic components |
| Technology | Anti-static, non-linting microfiber |
| Material | Ultra-fine microfiber |
| Dimensions | 10 x 10 cm (4 inch) per wipe, 400 wipes per pack |
Common Repair Uses
- ✓Cleaning and surface preparation across screen, board-level and rework jobs
- ✓Removing flux residue after soldering with IPA
- ✓Cleaning pads and the surrounding area after BGA reballing or an IC change
- ✓Wiping dust and fingerprints from LCD and OLED panels during screen replacement
- ✓Cleaning the board before inspection under a microscope
- ✓Clearing dust and residue around connectors and flex sockets
- ✓Cleaning camera and optical lenses
- ✓Preparing glass and display surfaces before final reassembly
- ✓Final board wipe-down before testing
Compatible Devices
- ✓Universal surface-cleaning scope, not device-specific; suitable for the surfaces and devices below
- ✓Smartphone LCD and OLED displays
- ✓Tablet touchscreens
- ✓Laptop and monitor screens
- ✓Camera and optical lenses
- ✓Eyeglass lenses
- ✓Bare PCBs and motherboards
- ✓Boards after soldering and rework
- ✓Electronic components and connectors
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Can I use Mechanic HK5090 wipes with isopropyl alcohol to clean flux off a PCB?
Are Mechanic HK5090 wipes lint-free and safe for LCD and OLED screens?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock



