Relife TX3 Non-Magnetic Chip Pry Needle Kit
₨ 999
Precision Chip Pry Needle Kit
The Relife TX3 chip pry needle kit gives your repair bench a non-magnetic, wear-resistant needle for lifting ICs and chips off mobile phone PCBs. The polished tip gives you precise solder control, so you lift a chip without splattering solder onto neighbouring components. A selected-steel handle keeps your grip firm during fine work. Pair it with your hot air station and soldering station for IC change karna jobs, board cleaning, and dead phone repairs. Mechanicpk supplies the TX3 to technicians, repair shops, and service centers across Pakistan who need a precise pry tool in their rework workflow.
In stock
Relife TX3 Chip Pry Needle Kit for Precision IC Lifting
The Relife TX3 chip pry needle kit does one job on the repair bench: it lifts a heated chip cleanly off a mobile PCB. Relife builds the needle with a smooth polished tip, a non-magnetic body, and a tough, wear-resistant finish. Your hand stays steady and the surrounding components stay untouched. If you handle IC change karna work every day in a Pakistani repair shop, a dedicated pry needle belongs next to your tweezers, microscope, and hot air station.
Needle Tip Control and Non-Magnetic Build
The tip decides whether a chip lift succeeds or ruins a board, and Relife shapes the TX3 tip for precise solder control. When you work under a microscope and slide the needle beneath a chip edge, the polished surface glides instead of snagging pads. Relife describes the result as no solder splatter when lifting chips, which matters on crowded boards where one stray solder ball shorts a neighbouring component and turns a simple repair into a hardware fault hunt.
The non-magnetic needle gives you a second advantage. Magnetised steel attracts tiny shield fragments, screws, and metal debris, and those particles drift across a board while you work. A non-magnetic needle keeps that debris away from the pads you clean and the chip you lift. The tough, wear-resistant body means the tip keeps its shape through repeated sessions instead of bending or dulling after a few jobs.
Where the TX3 Fits in Your Repair Workflow
Your rework process starts with heat. You warm the board on a hot air station or preheater, soften the solder under the target chip, and need a thin tool to break the final bond. The TX3 handles that step. Technicians use a chip pry needle after the solder reaches temperature and before they clean the pads, so it sits between your hot air work and your reballing or soldering step.
That placement makes the TX3 useful across several common Pakistani workshop scenarios. You lift a CPU, eMMC, or power IC on a dead phone, remove a chip to clean underfill residue, or free a component on a board with a charging issue or display problem. After the lift, you move straight to pad cleaning, reballing kits, and your soldering station. If you want to upgrade your bench, browse our PCB holders and microscopes. A steady board and clear magnification make every needle lift safer.
Handle Grip and Day-to-Day Bench Use
Relife makes the handle from selected steel with high toughness and wear resistance. A firmer grip gives you finer control, and fine control protects the components around your target chip. The kit ships with a handle and needles, so you can swap in a fresh needle when one wears and keep the same grip you already know.
For a repair shop owner, a tool like this earns its place through repetition. You run dozens of board jobs each week, and a wear-resistant needle keeps your per-job tool cost low. For a technician training in a service center or institute, the TX3 teaches the right habit: lift the chip with a precise tool, never with brute force. Keep your needle clean between jobs, wipe flux residue off the tip, and store it where the polished point stays protected.
Mechanicpk stocks the Relife TX3 for buyers across Pakistan who want a verified precision tool for mobile repair, PCB repair, and IC rework. It suits hardware engineers, GSM technicians, and shop owners who already know their workflow and want a specialised needle instead of an improvised blade. Add it alongside your test boxes, multimeters, and ISP pinout tools to cover diagnostics, rework, and testing from one bench.
| Weight | 0.8 kg |
|---|
Key Features
- ✓Non-magnetic needle keeps metal debris off the board
- ✓Smooth polished tip for precise solder control
- ✓No solder splatter when lifting chips
- ✓Good toughness for repeated rework sessions
- ✓Wear-resistant needle and handle
- ✓Selected-steel handle with a firm, controlled grip
- ✓Lightweight design that protects surrounding components
- ✓Kit includes a handle and needles
Specifications
| Brand | Relife |
|---|---|
| Model | TX3 |
| Category | Chip Pry Needle Kit |
| Compatibility | Universal — not device-specific |
| Supported Devices | Universal — not device-specific |
| Technology | Non-magnetic needle with smooth polished tip |
| Material | Selected steel (handle) |
Common Repair Uses
- ✓Lifting heated chips and ICs from PCBs during mobile phone rework
- ✓CPU lifting after hot air heating
- ✓eMMC chip removal on dead phone repairs
- ✓IC change karna on charging issue boards
- ✓Power IC removal on hardware fault repairs
- ✓Freeing chips on boards with display problems
- ✓Separating chips before pad cleaning
- ✓Preparing chips and pads for reballing
- ✓General PCB repair and microscope-assisted rework
Compatible Devices
- ✓Universal hand tool for PCB-level repair — not tied to specific phone models or chipsets
- ✓Android smartphone motherboards
- ✓iPhone logic boards
- ✓Samsung, Oppo, Vivo, Infinix, and Tecno boards
- ✓Tablet motherboards
- ✓CPU and processor chips on heated boards
- ✓eMMC and NAND memory chips on heated boards
- ✓Power management and charging ICs on heated boards
- ✓Other SMD chips on electronics PCBs
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Is the Relife TX3 needle magnetic?
Does the Relife TX3 splatter solder when you lift a chip?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock



